Mini Protank 3

I have a Mini Protank 3 on my MVP 2, I also have an IClear 16d that I use. I found that the Protank Mini is very heayvy on juice, or maybe it's just a lot smaller than the Iclear, but I doubt that this is the case, as it is supposed to be 1.5ml and the IClear is 1.6ml.
I was just wondering is this my imagination or has anyone else experienced this.
I also found that the Protank mini will leak some juice if I don't keep it pointing up that is the one thing I love about the Iclear you can put it down just like you want without any juice leaking.
But all that being said I like the Protank a lot, it's so easy to drag and if I could sort out the leaking issue I would probably replace all my the IClears with Protanks.

@rampokker.the mpt3 is a dual coil, havent used the 16d.is it also dual?
I notice the mpt3 is heavier on juice than the pt2.
The leaking may be coil related, have u tried replacing coil.i vape almost only my 2 mpt3's with minimal leaking and gurgling

@Necris yes the iclear is also dual coil. Will try replacing coils at some stage, I see they now have a 1.2 ohm coil that I want to try.

Should not be leaking at all. Check all you seals and washers and that the coil unit is well fastened.

I can also agree that the pro tank does suck the juice but the flavour is one of the best I have got from a tank not including rebuild able so the juice consumption is something that we have to live with but lemme put it 3 words the mpt3 rocks

I can tell you that vs the pt2 there just is no comparison...flavour, reliability and design all better on the mpt3

Even vs my Aerotank I stil prefer the mPT3. Flavour just seem better, but my wife has since inherited the mPT3...

Got a mpt3 today. Using it on a vision spinner 2. So far so good. Upgraded from Twisp. The mouthpiece "rattles" when moving about. Even though the O ring on it seems to seal fine. Have any of you also experienced this?

bjorn said:

Got a mpt3 today. Using it on a vision spinner 2. So far so good. Upgraded from Twisp. The mouthpiece "rattles" when moving about. Even though the O ring on it seems to seal fine. Have any of you also experienced this?

Click to expand...

Yes, someone else said the same. What you could do, is take off the o-ring and wrap some dental floss in there. Replace o-ring and see if it is better.

Ah! Thanks for the tip!

Odd.it bothered me initially but have gotten so used to it I forgot its even an issue

True, same here. Still it does kind "take away" from it's stylishness...

It does yes, considering its sleek lines the offset does take away from its overall design.will try the dental floss tonight

not to be funny, my vision spinner 2 is on charge now and vaping my mpt3 on a twisp battery and it's actually not bad at all. i almost want to say, it tastes a bit better than the vision?

bjorn said:

not to be funny, my vision spinner 2 is on charge now and vaping my mpt3 on a twisp battery and it's actually not bad at all. i almost want to say, it tastes a bit better than the vision?

Click to expand...

Not sure what power the twisp battery outputs....probably 3.7V. Set your spinner to 3.8V and the vape should be pretty much identical.
EDIT: Output could also be 4.2V....so try that on the spinner and compare.

Judging by the taste, compared to the spinner, I would say possibly between 3.3 and 3.7. I have a multimeter but have no idea where to stick the pointy bits to measure the twisp battery.

Anyway, I'm hogging @Necris 's thread now.. :/

Lol,@bjorn, not my thread bro...I just talk a lot

Well then it's you and me both hi jacking the thread

It's OK guys. The name of the thread is mini protank 3 so I guess anything related to the mpt3 is good. BTW I sorted the leaking on my mpt3, I wasnt tightening everything enough. Did anyone try the 1.2 ohm dual coils on a Mvp, I tried the 1.5 ohm and the 2. I find the 1.5 is hot alot quicker than the 2 so my logic tells me the 1.2 should be even faster.

Well in that case. Check how surprisingly spunky it looks on a Twisp battery.

Was at the eciggies.co.za PE rep today to pick up 510 connectors for my box mod and she didnt have any 1.2Ohm coils sadly, but picked up 2x 1.5's anyway.
I notice the old style mpt3 coil sucks a ton of juice into it vs the new type.tank level visibly lower after fill.
With a rebuilt pt2 single coil (32g twisted kanthal,8 wraps,1.7ohm, cotton wick)it kicks ass!
Working on wick at the moment as I am getting some gurgling on my juices as most are 70% vg+

I should pay that lady a visit sometime to see what she has there.

Yup yup, she has diy flavours im aiming to try, strawberry shortcake and candyfloss locally available, havent tried em yet

Schweet. I'm keen to start DYI'ing

Has anyone used the updated dual coils on mpt3? Do you prefer the old style or new coils?

I bought a pack of the upgrade coils, but I broke my glass after only 2 days. Anxiously waiting for vape mail to arrive