Searching for Ribbon Wire...

RaisedFist

Noob Vaper
LV
6
 
Joined
25/7/18
Posts
6
Awards
7
Age
39
Location
Johannesburg
Hello all!
This is my first topic creation, so I hope I get it right.
I started vaping a few months ago and now I want to start making my own coils. But to make the staggered fused claptons you need flat ribbon wire for the core, and no amount of Googling has found me any flat ribbon wire anywhere!!
:(
I keep getting sent to industrial stainless steel providers that make rolls in meter thickness, so that just won't do...
Can anybody guide me to a supplier of flat ribbon stainless steel wire?
I really hope y'all can help a vapin brutha out!
Thanks in advance!

K:nerd:
 
Vapehyper supplies ribbon wire ni80 and kanthal.
For stagerd fused claptons you do not require flatwire. But for stagerd framed staples you do.
Whoops, see, showing my noob status there!!
:wasntme:
Thanks so much, will hit them up now!!
 
If you are going to make staple stggered fused claptons get kanthal ribbon, and ni80 for the frames and the stagger and fuse it will help with the resistance if (increase the ohms) ss and ni80 have low resistance and i find kanthal robbon help it to be not so low (0.10-0.13ohms) and VapeHyper for the ribbon and gasphase for nikrothal 80 almost the same as ni80 but does contain some iron stil exelent quality wire

These came out at .10ohms just because of the stager and the staple.
20180805_160545.jpg
 
Last edited:
If you are going to make staple stggered fused claptons get kanthal ribbon, and ni80 for the frames and the stagger and fuse it will help with the resistance if (increase the ohms) ss and ni80 have low resistance and i find kanthal robbon help it to be not so low (0.10-0.13ohms) and VapeHyper for the ribbon and gasphase for nikrothal 80 almost the same as ni80 but does contain some iron stil exelent quality wire

These came out at .10ohms just because of the stager and the staple.
View attachment 142375
o_O
 
Back
Top