So...

Resistance

Vaping Royalty
LV
37
 
Joined
15/12/17
Posts
12,510
Awards
37
Location
Cape
I don't have a Cliq ,but one of my birthday gifts was a Cliq pod and due to working I could not get to try one yet.
So...IMG_20200118_000708.jpg IMG_20200118_000513.jpg
I made an adaptor.
Still in prototype phase but it works great.
 
IMG_20200119_182716.jpg IMG_20200119_182907.jpg
V2. Supports both the Twisp Cue an the Twisp Cliq pods.it doesn't look like a winner but that part I will leave to @Mic Lazzari and @HPBotha and there design team.
Ps I'm willing to consult.
 

Attachments

  • 15794511868843396254955055916049.jpg
    15794511868843396254955055916049.jpg
    151.4 KB · Views: 7
15794516384571895972394480867550.jpg forgot to add.its magnetised to keep the Cue pod in place.
The Cliq pod is friction fit.
 
I'm sure the far East is already cloning this :-D
 
@Resistance you biscuit!!! So last night. Sitting and browsing on my phone, killing my last bit of battery power in the dark (our power was out due to high volumes of rain, over 165mm in slightly less than 24hours) I had no charged vape batteries, I was struggling with cravings and I was sans Cue as it has gone through the washing. Then I stumbled upon this thing of beauty that @Resistance created. Having 1 broken Cue en several pods still left, I followed suit and improvised an adaptor. I used the original magnetic connector from the broken Cue and attached the wires into a RDA deck and secured it with an o-ring. IMG_20200120_062205_BURST002.jpg IMG_20200120_062331.jpg IMG_20200120_062214.jpg IMG_20200120_062355.jpg IMG_20200120_062348.jpg IMG_20200120_062155.jpg
 
If you cut the top of the cue off just about under the pod plus a few extra mm for the part you removed.(terminal block). And have the wires protrude from the bottom.
You can slip the pod in and have a secured fit. You would just need to epoxy the RDA base to the Cue or MacGyver the thing so you can screw it in the RDA terminals
 
@Resistance you biscuit!!! So last night. Sitting and browsing on my phone, killing my last bit of battery power in the dark (our power was out due to high volumes of rain, over 165mm in slightly less than 24hours) I had no charged vape batteries, I was struggling with cravings and I was sans Cue as it has gone through the washing. Then I stumbled upon this thing of beauty that @Resistance created. Having 1 broken Cue en several pods still left, I followed suit and improvised an adaptor. I used the original magnetic connector from the broken Cue and attached the wires into a RDA deck and secured it with an o-ring. View attachment 188059 View attachment 188060 View attachment 188061 View attachment 188062 View attachment 188063 View attachment 188064
Awesome. Well done bro!.

@vicTor it was cloned right here in Z.A. bru! :-D
 
If you cut the top of the cue off just about under the pod plus a few extra mm for the part you removed.(terminal block). And have the wires protrude from the bottom.
You can slip the pod in and have a secured fit. You would just need to epoxy the RDA base to the Cue or MacGyver the thing so you can screw it in the RDA terminals

Will attempt it tonight, the wires are very short and needs to be extended, only had a headlamp and a side cutter at my disposal last night. today I\ll be able to solder some extension wires, use some heatshrink around the metal cue body, as i don't want it to short on the RDA terminals.
 
So...... I think i found your updated profile pic!!! Nicely done! I am loving it mate!!!

macgyver.jpg
 
Nice guys!!! I like the initiative. So what was the goal? Just for fun? Or are you saying you desperately need a bigger battery?
 
Nice guys!!! I like the initiative. So what was the goal? Just for fun? Or are you saying you desperately need a bigger battery?

Mine was desperation (my Cue device underwent a Omo-Baptism recently :facepalm: ) and yesterday we were without electricity due to heavy rains for most of the day. Not having a charged set of married batteries for my bigger mods, i was left with nothing to vape on. I saw @Resistance 's brilliant post and fashioned a makeshift device from my dead Cue and a single (very low) battery in my Aegis. The batt was too low to fire any other atty, but fired the Cue pod perfectly on 6.5w. Problem solved thanks to "Angus 'Resistance' Macguyver" It just needs to hold until the 93rd of Januworry, then I'll get a replacement device again. It's handy, but miss my Cue's ease of use.
 
Nice guys!!! I like the initiative. So what was the goal? Just for fun? Or are you saying you desperately need a bigger battery?

Mine was desperation and the need to feed it.
I have always been interested in making, modifying, and design. Basically engineering and reverse engineering ,but not just in one particular field.
I always wanted to make something like this because of the close to perfect vape from the Cue and last week I just did it.
Mine is somewhat different to @Dela Rey Steyn ,but in essence similar. Mine is the base of the cue pod with inverted magnets and terminals soldered to the RTA base and as time passed maybe a few more changes. I figured something more permanent and will say @Dela Rey Steyn 'version is officially V3.
 

Attachments

  • 15795496574076828011476943360788.jpg
    15795496574076828011476943360788.jpg
    148.3 KB · Views: 8
Mine was desperation (my Cue device underwent a Omo-Baptism recently :facepalm: ) and yesterday we were without electricity due to heavy rains for most of the day. Not having a charged set of married batteries for my bigger mods, i was left with nothing to vape on. I saw @Resistance 's brilliant post and fashioned a makeshift device from my dead Cue and a single (very low) battery in my Aegis. The batt was too low to fire any other atty, but fired the Cue pod perfectly on 6.5w. Problem solved thanks to "Angus 'Resistance' Macguyver" It just needs to hold until the 93rd of Januworry, then I'll get a replacement device again. It's handy, but miss my Cue's ease of use.
I am glad some good came from this thread.
 
Nice guys!!! I like the initiative. So what was the goal? Just for fun? Or are you saying you desperately need a bigger battery?
No the cue is perfect stealth and all-day device. Don't change it please.
Rather add on.
Like I said I always wanted something like this and not because the cue is inadequate. I just wanted to have more options to vape the pods. An idea I had almost two years back and it only fabricated now.
My very own Twisp podmod
 
Last edited:
Back
Top