Dvarw RTA DL from KHW Mods in Hungary

Hey guys been awhile. Anyhow my plastic tank cracked plus I managed to mangle the chimney.
Anyhow ordered a new glasses tank as I vape alot of menthol and citrus flavours plus had to order a new chimney.
Now to save me from mangling it’s again the chimney. How do you guys pry it off?? It goes on pretty tight and I don’t want to pry it open as last time it bent the metal around the holes etc.

@Yas786 I use the back end of my ceramic tweezers and put it in the wick hole and pry it off. If it's really tight then the o-ring needs changing. And as always lube the o-rings.
Dvarw 001.JPG
 
Jeepers @Rob Fisher !
That's a serious rewicking job! :eek:
You must have it down to a fine art now!
 
@Yas786 I use the back end of my ceramic tweezers and put it in the wick hole and pry it off. If it's really tight then the o-ring needs changing. And as always lube the o-rings.
View attachment 180825
That’s exactly what I did with my first one and it bent the metal around the wick holes.
But I’ll put lube up the o ring and see if that helps.
Thanks
 
That’s exactly what I did with my first one and it bent the metal around the wick holes.
But I’ll put lube up the o ring and see if that helps.
Thanks

The o-ring for the chamber cap is just a tad to fat and makes fitting the chamber cap a real pain. Not impossible to fit once you have lubed it with some PG but a still enough of a headache that required a long term solution.

To solve the problem I went though all my atty’s spares bags to find a o-ring that had a better tolerance. Not sure of the exact dimensions but I ended using one of the o-rings from a KayFun Lite 2019. Now the chamber cap goes on and comes off with just the right amount of tension.
 
I usually just grip it with some TP and wiggle it a bit. Comes off pretty easy every time.

The Never Forget Cap i then push out with my finger from the inside of the chamber cap.
 
I must say I was pleasantly surprised! The Dvarw DL is so perfect as it is. But the Wormhole tank looks quality and vapes well! The drip tip is great and comfortable! I have to do conventional wicking because the Exocet method won’t work due to the juice flow control. I need to get a SS top ring and clear insides next because most of my Dvarw’s are SS! All in all it’s a winner!
Wormhole 003.JPG
 
Despite testing a bazillion RTA's I still rate the Dvarw DL for my style of vaping and ease of use the number one RTA on the planet! Here is the Dvarw Family being prepped for the next week!
Dvarw PitStop 2.jpg Dvarw PitStop 3.jpg Dvarw PitStop 4.jpg Dvarw PitStop 5.jpg Dvarw PitStop 6.jpg
 
So much spare time... Dvarw's with clean coils and fresh wicks standing by for Red Pill to be added!
Dvarw's 2.JPG
 
MMM where is the black Dvarw ??

The black one is in the display cabinet... it doesn't get much airtime! the edges between the base and the tank are a little marked and my OCD goes crazy. Maybe I should get my permanent marker out.
 
The black one is in the display cabinet... it doesn't get much airtime! the edges between the base and the tank are a little marked and my OCD goes crazy. Maybe I should get my permanent marker out.

Little bit of black cutex and some very fine waterpaper. And masking tape.

Marker will likely leave a browny looking shine wherever you draw with it
 
The black one is in the display cabinet... it doesn't get much airtime! the edges between the base and the tank are a little marked and my OCD goes crazy. Maybe I should get my permanent marker out.
Does'nt work , tried but after a day or 2's use it shows up again ...unless you patch up and just leave it alone.
 
Does'nt work , tried but after a day or 2's use it shows up again ...unless you patch up and just leave it alone.

I've used car paint repair markers with excelent results.

Amazing DVARW collection.
 
Last edited:
Looking good Rob!
Those scissors look like garden shears but I bet they are comfortable to use
 
Back
Top