Dvarw FL's! The Facelift versions!
Last edited:
Dvarw RTA DL from KHW Mods in Hungary
- Thread starter Rob Fisher
- Start date
Close Up's of the deck and wicking of the Dvarw DL FL as requested!
Tabs on posts and different airflow inserts are a winner.
Another winner are your style of driptips. @Rob Fisher where do you buy them?
Stay safe.
Another winner are your style of driptips. @Rob Fisher where do you buy them?
Stay safe.
@RuiG my drip tips are from Siam Mods in Scotland!
https://www.thedriptipshop.com/collections/siam-mods-drip-tips
And his Facebook group is https://www.facebook.com/groups/721893824514190/
Serial number #2 and #3 of the all-new Dvarw DL FL! Stock coming to the vendors and KHW Mods web site real soon!
Bazinga!
Hi All
So i managed to get my hands on the og Dvarw. Whats the general consensus for coil size and height above airflow? I am currently getting good flavour, but not mindblowing best rta ever. Currently using TFC and 3mm Quad Alien (tried 2.5mm before), I did try most wicking methods mentioned on this thread. I get no leaking whatsoever and bubbles so I do not think my wicking is the problem.
Any tips will be appreciated
So i managed to get my hands on the og Dvarw. Whats the general consensus for coil size and height above airflow? I am currently getting good flavour, but not mindblowing best rta ever. Currently using TFC and 3mm Quad Alien (tried 2.5mm before), I did try most wicking methods mentioned on this thread. I get no leaking whatsoever and bubbles so I do not think my wicking is the problem.
Any tips will be appreciated
I want one!
Hi All
So i managed to get my hands on the og Dvarw. Whats the general consensus for coil size and height above airflow? I am currently getting good flavour, but not mindblowing best rta ever. Currently using TFC and 3mm Quad Alien (tried 2.5mm before), I did try most wicking methods mentioned on this thread. I get no leaking whatsoever and bubbles so I do not think my wicking is the problem.
Any tips will be appreciated
hi if you using a 3mm then it’s exactly what I have in. What I noticed in the dvarw is that you can do anything you like to it and It’ll still get a fantastic result. I was very reluctant to upping my nic mg and found if you raise the coil it gives a stronger throat hit and retains flavor.
my observation is lower the coil the better flavor whereas higher better throat hit.
What I normal do is take a coil company nano alien then resize it to 3mm (Might be a little bigger) so it barely fits between the posts.
I then take a air disk that’s a one size smaller than normal one id usually use. When I lift the coil to be about 1.5mm to 2mm from the never forget cap, it seems the airflow ‘increases’. Probably because there is less of an obstruction right infront the airflow.
That’s how I build my perfect flavor and throat hit combination. This in my case made the airflow less turbulent, placing the coil a lot higher.
Hi All
So i managed to get my hands on the og Dvarw. Whats the general consensus for coil size and height above airflow? I am currently getting good flavour, but not mindblowing best rta ever. Currently using TFC and 3mm Quad Alien (tried 2.5mm before), I did try most wicking methods mentioned on this thread. I get no leaking whatsoever and bubbles so I do not think my wicking is the problem.
Any tips will be appreciated
Just a heads up for anyone wanting a Dvarw DL FL... KHW have some in stock right now! https://www.khwmods.com/index.php/product-category/tanks/dvarw-dl-fl/
I'm so glad they did this FL... I hated the old version with no support for the coil legs. This might convert me to the Dvarw family.
I'm not sure the OG Dvarw DL will ever be beaten for the perfect airflow and flavour along with pure simplicity and bottom fill!
Do you rate the bottom fill as a pro uncle Rob?
I do in a massive way! All these top-fill tanks tend to leak when filling and yes I know there is juice flow control etc but for me, a bottom fill is a major win! I don't have to faff around especially when I'm out and about... simply turn the tank upside down, unscrew, fill and Bazinga!
Maybe I just never got used to it, but I never liked having to take the tank off the mod to refill, the same with the Kayfun Lite.
If I go into the bush, especially Botswana, I only stop for border posts and fuel stops. Doing a refill on a bottom fill tank requires two hands off the steering wheel and is irresponsible of me to do so. Now you know some of the reasons I like big tanks and dual battery mods. The big baby beast fulfills this role very well with the swing away cap, so much so that I can hand it to my wife and she does it. The Blotto is also not bad.
This thread is about the Dvarw though, and I agree, bottom fill suits the Dvarw very well and I have yet to hear bout one person complain of leaking. That to me is a major Pro.
So I got my hands on a Dvarw FL MTL 22mm. All I can say is, such a great improvement for coil fastening but since I got the Taifun GTR with the nice top fill I am struggling to get used to bottom fill. I will however keep testing it as my taste buds are telling me flavour is better on the Dvarw... very very slightly though!
You did mention that the FL now has far less threads for unscrewing. Was this one of the innovations that you gave feedback to KHW ?
I’m using a dvarw MTL (the original) and I have put a plain 26 AWG ni80 and I am enjoying the flavour it is producing!
Similar threads
