Coil wire identification and easily available alternative suggestions.

Stew

Elite Vaper
LV
22
 
Joined
7/7/20
Posts
1,782
Awards
25
Location
Pretoria
Hi all. What is the coil wire (both types) in the image and what would you recommend as an alternative to the coil wire in the image, especially the outer one, that is easily available in South Africa. Is there a stainless steel version of wire?
Has anyone replaced mesh in this way?
Pretty quizzy about things I guess.
What would the benifits be of doing this?
20200803_230200.jpg
 
Last edited:
Hi all. What is the coil wire (both types) in the image and what would you recommend as an alternative to the coil wire in the image, especially the outer one, that is easily available in South Africa. Is there a stainless steel version of wire?
Has anyone replaced mesh in this way?
Pretty quizzy about things I guess.
View attachment 203190
These look like staggered fused claptons.

You can easily get SS 316L spools from some vendors still. e.g
https://vapehyper.co.za/collections...cher-stainless-steel-30ft?variant=40516035398

You may need to shop around but I would venture a guess and say you need 28Awg and say 34 or 36 awg
 
Thats exactly what it is, coil porn, very often just an expression of the coil builder. Those coils have considerable mass and require a lot of power, and may not necessarily provide you a better vape, but extremely fun/frustrating to build.
 
Thats exactly what it is, coil porn, very often just an expression of the coil builder. Those coils have considerable mass and require a lot of power, and may not necessarily provide you a better vape, but extremely fun/frustrating to build.
Thanks very much.
 
Thats exactly what it is, coil porn, very often just an expression of the coil builder. Those coils have considerable mass and require a lot of power, and may not necessarily provide you a better vape, but extremely fun/frustrating to build.
Exactly this... these are exceptionally skilled builders showing off their abilities. I follow some of them on instagram and in many cases the coils never see a piece of cotton. They spend hours trying to get the perfect colors for an amazing photo.
 
These look like staggered fused claptons.

You can easily get SS 316L spools from some vendors still. e.g
https://vapehyper.co.za/collections...cher-stainless-steel-30ft?variant=40516035398

You may need to shop around but I would venture a guess and say you need 28Awg and say 34 or 36 awg

Not easily at all. Vapehyper is out of stock except for 40G.
I've been on the hunt for larger spools of SS that's available locally for like a year now.
It seems you have to import them yourself as no vendor seems to be willing to do so.
Donno if the coil builders on the forum might have a source but AFAIK they tend to work with NI80 and Kanthal only.
 
Not easily at all. Vapehyper is out of stock except for 40G.
I've been on the hunt for larger spools of SS that's available locally for like a year now.
It seems you have to import them yourself as no vendor seems to be willing to do so.
Donno if the coil builders on the forum might have a source but AFAIK they tend to work with NI80 and Kanthal only.
My bad. I wasn’t aware SS was so difficult to find.
 
Back
Top