SXK Supbox Sevo 70W Box Kit

Discussion in 'Regulated Mod Reviews' started by Timwis, 9/9/20.

Tags:
  1. Timwis

    Excellent Member

    4.9/5, 10 votes

    Timwis Vaping Master ECIGSSA Donor

    Threads:
    754
    Posts:
    5,867
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +23,036
    Hi Ecigssa members, In this review i take a look at the Supbox Sevo 70W Box Kit from SXK. The SXK Supbox Sevo 70W Box Kit was supplied for the purpose of this review by Linky from Sacowin.

    https://www.sacowin.com/product/sxk-supbox-kit/

    [​IMG]

    Introduction

    SXK are best known as one of the best cloners and for that very reason divide opinion in the vaping world. Here though we have a product of their own design which is interesting to say the least. Many Billet Box (a device SXK have cloned) lovers like the whole idea of versatility being able to use different RBA bridges and coil adaptors and the Supbox which i assume is short for Super box takes this idea of versatility to a whole new level.

    The Supbox comes in this version i have received (with Sevo-70 chipset) and also a Pro version featuring the DNA60 chipset. The device is essentially a side by side which allows not just the Billet / Bantam Box fitting Supbox Pod tank which is compatible with Smok RPM coils but also the Uni Tank, Boro Tank or other tanks which are compatible with the Billet or Bantam box to fit which also means being compatible with almost all available bridges.

    The versatility doesn't stop there as the Supbox also comes with a 510 connector allowing standard tanks up to 24mm in diameter to be fitted as well as being able to be used with either an 18650 or 18350 battery which gets rid of the tube giving the device quite a different look!

    ___________________________________________________________________



    In The Box

    [​IMG]

    Contents:

    1 x SXK Supbox (pre-installed Supbox Pod Tank and Sleeve)
    1 x USB Charging Cable
    2 x Coils(0.6Ω/1.1Ω)
    1 x User Manual
    1 x Outer Sleeve for Atomizer
    1 x 510 Plate

    [​IMG]

    ___________________________________________________________________



    Aesthetics and Ergonomics

    The Supbox came in sturdy cardboard box packaging and on opening we can see the Supbox minus drip-tip displayed and a large box of Accessories to the side. The device comes pre-installed with the Supbox Pod Tank and Cage which gives it a better look and also where the Pod Tank is concerned keeps it secured. When using the device with a standard tank it can be used without a top cage but one with a slanted and more rounded front is also supplied if you like the look. I received the Black Yellow version which is a Black device with Yellow top cages but also available is an all Black affair and Black with Red cages. The base, battery tube and cap, fire button (found on the front), side plaque and some protection edging to the Pod Tank Cage are Stainless Steel while the main construction including cages is thick ABS.

    At 146g it's about the same weight as an average single battery device once the battery is installed so with the added weight of a battery it's a quite heavy device but it just feels solid. The device is curved and narrower at the spine with raised bands which adds extra grip, ergonomically it's best with the spine in the palm and using as a finger firer as to accommodate the width of boro tanks etc it's much wider at it's front. The overall form factor is basically a side by side device and moving to the stainless steel bottom we have the screen and navigational buttons within an indented section which sit flush. On one side we have a metal plaque with "Supbox" printed and beneath a micro USB port.

    [​IMG]

    ___________________________________________________________________



    SupBox Specs and Features:


    Main Features:

    1. 5ml Cartridge, compatible with more than 90% of original accessories of Billet Box Pod Kit
    2. Supbox pod tank compatible with SMOK RPM Coils
    3. Compatible with more than 95% RTA\RDA\RDTA(less than 24 diameter) on the market
    4. 5 different forms: Pod Mode, Tank/RDA Mode, Universal Mode, 18650 Mode, 18350 Mode
    5. Single 18650/18350 battery, output power 1-70W, three output modes: VW/TC/By Pass


    Parameter:

    Construction material ABS + Stainless Steel
    Size: 53 x 31 x 96mm
    Weight: 146g
    Chipset: Sevo 70w
    Capacity: 5ml
    Resistance range 0.8-3ohm
    Resistance: 0.6/1.1Ω
    Screen: 0.96 "
    Single 18650/18350 battery
    Modes: Mode: VW / Mech (Bypass) / TC (NI-TI-SS)
    Colour: Full Black, Black Yellow, Red Black

    [​IMG]

    [​IMG]

    ___________________________________________________________________



    What You Receive?

    You receive the Supbox device pre-installed with the Supbox Pod Tank, installed cage and 510 drip-tip base screwed in place. You also get a 510 drip-tip, cage section for a standard tank and raised 510 plate. The Supbox Pod Tank has an 0.6ohm mesh coil pre-installed, also included is a 1.1ohm mesh coil, finally you get spare o-rings and a micro USB cable. (Note: you also receive the Uni-Tank with the Pro version).

    Some random photos:

    [​IMG]

    ___________________________________________________________________



    Modes Of Operation

    The marketing shows the device to have 5 modes of operation or set-ups which isn't the case out the box with the DNA60 Pro version having 4 and the Sevo-70 having 3 but the potential is there.

    First we have Pod Mode which is the use of the pre-installed Pod Mod Tank which is compatible with Smok RPM coils. Next we have Tank Mode which after removing the contact plate it gives us a 510 connector for tall tanks or you can screw in the raised 510 plate for more standard height tanks, this mode is for when using the supplied cage limiting tanks to 24mm. Next is Universal Mode which is when using the Uni Tank which 90% of available bridges will fit but the Uni Tank only comes with the DNA60 Pro version. Next is 18650 mode which is Tank Mode but without the cage which both gives a different look and increases the maximum size tank to 26mm. Finally we have 18350 mode for low wattage MTL vapers making the device smaller but the 18350 tube isn't included with either versions so will be a separate purchase.

    [​IMG]

    ___________________________________________________________________



    Compatibility And What Else Is Available

    As well as the Supbox Pod Tank which is compatible with RPM coils and the Uni Tank which isn't included with the Sevo-70 version but can be bought for just $7.20, any tank that fits inside the Billet Box Rev4 or Bantam Box will fit including the Bantam Pod Tank and All in one products like the Vapesnail.


    [​IMG]


    Also as mentioned there will be an 18350 tube available and sets of the cages in different colours which i have already seen available at $10.50. Finally there are also other 18650 tubes available in different designs so the device can be customised to give it a different look!

    [​IMG]

    [​IMG]

    ___________________________________________________________________



    Using Boro & Pod Tanks

    To fit any Billet or Bantam Box Tank you just hold the Tank in position and lower the top cage that fits nicely to the shape of the Tank keeping it in position even though the set-up at this stage isn't secured. Screwing the battery cap on tightens down the cage and then screwing the drip-tip base just like with a Billet Box secures the Tank in position, just make sure the drip-tip base is secured tight so you don't have the ohms reading jumping around!

    [​IMG]

    Picured: Supbox Pod Tank, Vapesnail, Bantam Pod Tank and Bantam Pod Tank with own 510!

    ___________________________________________________________________



    Using Standard Tanks

    First you need to unscrew the contact plate which is easier if you start loosening it with the use of needle nose tweezers placed in two of 4 available tiny holes, then it can be finished with your fingers, likewise when fitting back in place screw in finger tight then give it an extra turn with tweezers.

    This now reveals a standard 510 connection and very tall tanks can be screwed straight in but standard size tanks will need the raised 510 plate fitting in place first. If using a tank 24mm in diameter or less you can fit the cage which like the Pod Tank cage gets secured in place by screwing the battery cap in position.

    [​IMG]

    [​IMG]

    ___________________________________________________________________



    Fitting The Battery

    The installed battery tube accommodates an 18650 battery. We have a battery cap to the top of the tube which needs unscrewing to allow the battery to be dropped in place. On the underside of the cap negative is clearly labelled and when the cap is screwed back in place it also secures the top cage (if you are using it). The threading is slightly crunchy but it screws on and off easy enough so overall very happy. The battery tube does unscrew from the device so as mentioned before a tube with a different design (separate purchase) can be fitted or when available a smaller tube to accommodate an 18350 but this would need using without the cage fitted.

    [​IMG]

    ___________________________________________________________________



    Display

    The Display is bright and very much Old School just giving the most important information. Top left we have the resistance then underneath the voltage (this is wattage when using TC), finally bottom left we have a battery status bar.

    The top right area of the screen is where you will find the wattage or temperature depending which mode you are in and underneath to the left is the mode and bottom right your puffs.

    [​IMG]

    ___________________________________________________________________



    Navigating The Supbox Sevo-70

    The device is the usual 5 clicks of the fire button to turn on and 5 clicks to turn off and once on up and down together locks and unlocks the navigational buttons but the device will still fire.

    To choose the mode is 3 quick clicks of the fire button which allows you to scroll through Mech (Bypass), Watts, Ni, Ti and SS, fire selects. There is also a little menu which is down and fire to enter, this gives the options to reset puffs or set a puff limit, flip the screen, enter the curves feature or turn the screen off, to turn the screen back on you need to press down and fire again to re-enter the menu.

    When in TC pressing fire quickly twice allows you to use the navigational buttons to set wattage and up and fire together allows you to manually enter a TCR value.
    It's a really nice user-interface but the wattage adjusts from 1w to 70w in 0.1 increments which can take time, i would prefer 5w to 20w in 0.1 increments and then switching to 1w increments up to 70w.

    [​IMG]

    ___________________________________________________________________



    Charging

    The Supbox supports on-board charging and firmware upgrades via the micro USB port using the supplied cable, a con that it's not Type C and i can't find mentioned anywhere including the manual what the charge rate actually is!

    ___________________________________________________________________



    My Thoughts!

    What a great idea, a side by side device that can also accommodate Billet Box type tanks and therefore use Billet Box Bridges. The only real issue i have is the obvious that the screen and navigational buttons are on the base as it's not ideal to have to turn the device upside down. It's just a common issue with a lot of these side by side devices because the PCB can only fit at the bottom but at least it's been implemented well and a great job has been done to get the buttons sitting absolutely flush. Also i wish the Uni tank was included with this version as well as the Pro but at least i have seen it for only $7.20 and those that have a BB Tank already are sorted.

    I don't have a Billet Box but i do have the Bantam Box and Bantam Revision as well as a few bridges and the Vapesnail so i have had a hoot messing around with this. I have used the supplied Supbox Pod Tank, Bantam Pod Tank, Vapesnail and a couple of RTA's and it's been thoroughly enjoyably.

    The device has a high build quality and feels like it will take some knocks, i also think people who have considered trying a Billet Box but have been put off by the price might be tempted to go this route. The device although not super ergonomic isn't particularly uncomfortable to hold but it must be pointed out it is heavy for a single battery device.

    I like the fact different colour cages and different design battery tubes can be purchased and the fact an 18350 tube will also be available. The cage does limit the device to 24mm tanks but it can be used without the cage to go up to 26mm which covers the vast majority of tanks.

    The Sevo chipset i have used in some Ultroner products and it's an high performing efficient chip. It fires without any delay hitting set wattage instantly and never misses a beat while giving good value for your mAh's. The user interface is very easy to navigate but is feature rich including Bypass, TC and curves.

    Finally Smok RPM coils being compatible with the Supbox Pod Tank is another big pro as they are readily available and there is an extensive range to cover most peoples wattage preferences! Well i will sign off now and go and have another play, thumbs up SXK!!!

    [​IMG]

    ___________________________________________________________________



    Likes

    Very good build quality
    Solid durable device
    Sevo-70 high performance chipset
    Efficient-good battery life comparable
    DNA60 Pro version also available
    Includes Supbox Pod Tank
    Can use own drip tip with all fitted BB tanks
    Can use all Rev4 Billet Box compatible tanks
    Can use Billet Box bridges
    Can use Bantam Box Tanks
    Included 510 plate
    Can use standard tanks with or without cage
    Up to 26mm tanks compatible (24mm with cage)
    2 coils included (used 1.1ohm coil gave really good flavour and medium MTL draw)
    Different coloured cages and different design battery tubes available
    Can be used in 18350 mode (tube a separate purchase)
    RPM coils compatible
    Supports on-board charging and firmware upgrades



    Cons

    Screen and navigational buttons on base
    Wish Uni Tank was included with this version
    18350 battery tube will be a separate purchase
    Adjusts in 0.1w increments (con for me)
    Heavy device
    Not Type C and charge rate not given

    I would once again like to thank Linky from Sacowin for supplying the Supbox Sevo 70W Box Kit for the purpose of this review, thanks for reading and stay safe!

    https://www.sacowin.com/product/sxk-supbox-kit/

    ___________________________________________________________________
     
    • Winner Winner x 10
    • Like Like x 3
    • Informative Informative x 3
    • List
    Last edited: 9/9/20
  2. DavyH

    Excellent Member

    5/5, 2 votes

    DavyH Vaping Enthusiast

    Threads:
    16
    Posts:
    880
    Country:
    South Africa
    Joined:
    21/5/20
    Gender:
    Male
    Location:
    Sandton
    Ratings:
    +4,919
    Any vendors reading this...

    Yes please. The hardware hobbyists need this device and all the spares!

    Great review, @Timwis, as usual. My reaction to the first picture was WTF?, but the more detail given, the better this device looks. It’s like a LEGO set for vapers!
     
    • Agree Agree x 10
    • Like Like x 2
    • List
  3. Gadgetboy

    Not Rated Member

    0/5,

    Gadgetboy Experienced Vaper

    Threads:
    19
    Posts:
    297
    Country:
    South Africa
    Joined:
    9/1/17
    Gender:
    Male
    Location:
    Alberton, Gauteng
    Ratings:
    +926
    I want one. Im a sucker for things that look "Gadgety" hence my tag name. :)
     
    • Like Like x 7
    • Funny Funny x 1
    • Can relate Can relate x 1
    • List
  4. Grand Guru

    Excellent Member

    5/5, 9 votes

    Grand Guru The Vape Guru ECIGSSA Donor

    Threads:
    45
    Posts:
    5,788
    Country:
    South Africa
    Joined:
    25/9/18
    Gender:
    Male
    Location:
    Bloemfontein
    Ratings:
    +39,654
    I like the concept. Great review @Timwis!
     
  5. Puff the Magic Dragon

    Excellent Member

    5/5, 7 votes

    Puff the Magic Dragon Grumpy Old Vaper

    Threads:
    48
    Posts:
    3,817
    Country:
    United Kingdom
    Joined:
    22/12/14
    Location:
    Cape Town
    Ratings:
    +25,418
    Great review as always.

    Do you think that there would be any real advantage buying the DNA version? NB for a wattage only vaper.
     
  6. Puff the Magic Dragon

    Excellent Member

    5/5, 7 votes

    Puff the Magic Dragon Grumpy Old Vaper

    Threads:
    48
    Posts:
    3,817
    Country:
    United Kingdom
    Joined:
    22/12/14
    Location:
    Cape Town
    Ratings:
    +25,418
  7. Timwis

    Excellent Member

    4.9/5, 10 votes

    Timwis Vaping Master ECIGSSA Donor

    Threads:
    754
    Posts:
    5,867
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +23,036
    My own opinion for wattage only it's too much of a mark up to make financial sense to get the DNA60 version, you do get the Uni Tank extra as well but a Boro Tank or indeed the Uni Tank can be bought separately cheaply and the Sevo Chipset i find to be excellent!
     
    • Like Like x 5
    • Informative Informative x 2
    • List
  8. Timwis

    Excellent Member

    4.9/5, 10 votes

    Timwis Vaping Master ECIGSSA Donor

    Threads:
    754
    Posts:
    5,867
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +23,036
    Sorry not always at the computer 24hrs lol, i leave pages open so it says i'm online when i might not even be at home!
     
    • Agree Agree x 2
    • Like Like x 1
    • Can relate Can relate x 1
    • List
  9. Puff the Magic Dragon

    Excellent Member

    5/5, 7 votes

    Puff the Magic Dragon Grumpy Old Vaper

    Threads:
    48
    Posts:
    3,817
    Country:
    United Kingdom
    Joined:
    22/12/14
    Location:
    Cape Town
    Ratings:
    +25,418

    Thanks for confirming that :)
     
  10. Puff the Magic Dragon

    Excellent Member

    5/5, 7 votes

    Puff the Magic Dragon Grumpy Old Vaper

    Threads:
    48
    Posts:
    3,817
    Country:
    United Kingdom
    Joined:
    22/12/14
    Location:
    Cape Town
    Ratings:
    +25,418

    Sorry but my weird sense of homour bit me here. It had nothing to do with time.

    What it reminded me of is wassup as in wa Sup Box. A bit obtuse. I realise that now.

    It also reminds me of the well renowned Subbox .

    upload_2020-9-9_13-48-7.jpeg
     
    Last edited: 10/9/20
  11. klipdrifter

    Excellent Member

    5/5, 6 votes

    klipdrifter Experienced Vaper ECIGSSA Donor

    Threads:
    35
    Posts:
    306
    Country:
    South Africa
    Joined:
    26/6/19
    Gender:
    Male
    Location:
    South Africa
    Ratings:
    +777
    I haven't seen this much innovation on a mod for a loooooonnnngggg time. I like it, if it becomes available locally I would like to get one. I just hope that if it does become available locally that they will have all the extra bits and bobs in stock as well.
     
  12. Timwis

    Excellent Member

    4.9/5, 10 votes

    Timwis Vaping Master ECIGSSA Donor

    Threads:
    754
    Posts:
    5,867
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +23,036
    I have two of them, the Black one pictured with Red Buttons, only the complete device is now just bare metal from how easy the paint chips and the White one which has never been used but sits in my display cabinet with a light blue Subtank Nano on it!
     
    • Like Like x 1
    • Informative Informative x 1
    • List
  13. DavyH

    Excellent Member

    5/5, 2 votes

    DavyH Vaping Enthusiast

    Threads:
    16
    Posts:
    880
    Country:
    South Africa
    Joined:
    21/5/20
    Gender:
    Male
    Location:
    Sandton
    Ratings:
    +4,919
    Almost six months later, the Abyss arrives and sets the market alight. I still prefer this design...

    SXK's history as cloners may have worked against them here. Not a single SA distro brought this in and I haven't wanted to put the overseas shipping systems to the test during Covid.
     
    • Like Like x 1
    • Winner Winner x 1
    • List
  14. Munro31

    Not Rated Member

    0/5,

    Munro31 Dedicated Vaper

    Threads:
    13
    Posts:
    751
    Country:
    South Africa
    Joined:
    19/8/20
    Gender:
    Male
    Location:
    Witbank
    Ratings:
    +3,064
    It's so weird, retailers will definitely open up revenue streams with this and the SXK BB, I don't know why they havent:confundio:
     
    • Like Like x 1
    • Agree Agree x 1
    • List
  15. Dela Rey Steyn

    Excellent Member

    5/5, 11 votes

    Dela Rey Steyn Vaper and Mech Mod Enthusiast

    Threads:
    53
    Posts:
    3,840
    Country:
    South Africa
    Joined:
    23/10/17
    Gender:
    Male
    Location:
    Louis Trichardt
    Ratings:
    +22,678
    There is a big "Anti-Clone" movement in SA, and the majority of people will alienate and put pressure on any vendor that stocks and sells clones, like the SXK BB.
     
    • Informative Informative x 2
    • Agree Agree x 1
    • List
  16. DavyH

    Excellent Member

    5/5, 2 votes

    DavyH Vaping Enthusiast

    Threads:
    16
    Posts:
    880
    Country:
    South Africa
    Joined:
    21/5/20
    Gender:
    Male
    Location:
    Sandton
    Ratings:
    +4,919
    BUT - and it's a big but - this and the Bantam Box are originals. That's just throwing the baby out with the bathwater.
     
    • Like Like x 2
    • Agree Agree x 1
    • List
  17. Dela Rey Steyn

    Excellent Member

    5/5, 11 votes

    Dela Rey Steyn Vaper and Mech Mod Enthusiast

    Threads:
    53
    Posts:
    3,840
    Country:
    South Africa
    Joined:
    23/10/17
    Gender:
    Male
    Location:
    Louis Trichardt
    Ratings:
    +22,678
    I got a Bantam Box from BLCK, love it. Sadly, SWAMBO has annexed it for herself, for the once every 2 months that she might / maybe vape :facepalm:
     
    • Funny Funny x 4
    • Can relate Can relate x 1
    • List
  18. Timwis

    Excellent Member

    4.9/5, 10 votes

    Timwis Vaping Master ECIGSSA Donor

    Threads:
    754
    Posts:
    5,867
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +23,036
    I just find it very interesting those having wet dreams over the Abyss showed and still seem to put there nose up at this, they have never appeared on this thread and pretty sure i did a new product watch thread for it also where it was shunned (well now just pretending to of been unaware of it to hide double standards and hypocrisy)! Yet this shows far more innovation than the Abyss as this is using the boro tank on a device rather than a bridge accommodating tank (which has already been done). The Abyss really is influenced by both this and the Tell bridge tank so what is the "innovation" and "game changing" tags floated about all about total BS. I have the Abyss on the way so hope it is very good but even if it is i will not be banding false tags about or quietly sweeping any negatives under the carpet!
     
    • Like Like x 6
    • Agree Agree x 1
    • Winner Winner x 1
    • List
  19. Jengz

    Excellent Member

    5/5, 2 votes

    Jengz Hier Kom a ding!

    Threads:
    114
    Posts:
    2,736
    Country:
    South Africa
    Joined:
    23/9/16
    Gender:
    Male
    Location:
    Jhb
    Ratings:
    +9,210
    I love my abyss! I feel it meets all my expectations bar some crap threading on my 21700 top cap. I did however message many vendors for this supbox but unfortunately we did not get them locally which is why I never bought it. I understand your viewpoint and agree with a lot of it but everyone is also entitled to their own decisions, i wouldn't label them as hypocrites even if I disagree with their decisions, thats just how the world works. Just how i view things I guess. Ps ur reviews also influence a lot my decisions, even though i don't oftwn voice it, so thanks for that.
     
  20. Timwis

    Excellent Member

    4.9/5, 10 votes

    Timwis Vaping Master ECIGSSA Donor

    Threads:
    754
    Posts:
    5,867
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +23,036
    I hope i love it as well but still don't understand why so many (and i am not just talking but am including this forum) who didn't show any interest in this (not my review, the product in general) yet the Abyss is "game changing" i post to 6 forums and many sub-reddits and many called the all idea of the supbox wrong yet those same people giving the Abyss the thumbs up yet it's been done before the Supbox is more innovative! I am hoping that most issues with gaping, threading etc have been sorted out and no burns to the surface as i saw on one photo because the one i am getting sent is off the next production run. In the Abyss thread i don't think i have ever seen such a long list of issues however small yet people still promoting it, remember this is at a price point where it should be perfect really before going retail
     
    • Agree Agree x 3
    • Like Like x 1
    • List
  21. Munro31

    Not Rated Member

    0/5,

    Munro31 Dedicated Vaper

    Threads:
    13
    Posts:
    751
    Country:
    South Africa
    Joined:
    19/8/20
    Gender:
    Male
    Location:
    Witbank
    Ratings:
    +3,064
    People are sheep, is the SXK BB hurting sales of the original? Definitely not! And the Supbox is a clone of what?
     
  22. Dela Rey Steyn

    Excellent Member

    5/5, 11 votes

    Dela Rey Steyn Vaper and Mech Mod Enthusiast

    Threads:
    53
    Posts:
    3,840
    Country:
    South Africa
    Joined:
    23/10/17
    Gender:
    Male
    Location:
    Louis Trichardt
    Ratings:
    +22,678
    Agree, Auth BB's are sold out faster than what they are being produced :rolleyes: "But clones are hurting them" o_O
     
  23. Munro31

    Not Rated Member

    0/5,

    Munro31 Dedicated Vaper

    Threads:
    13
    Posts:
    751
    Country:
    South Africa
    Joined:
    19/8/20
    Gender:
    Male
    Location:
    Witbank
    Ratings:
    +3,064
    Weird world boet, on some clones I do understand the flack, but not on the BB clone
     
  24. Dela Rey Steyn

    Excellent Member

    5/5, 11 votes

    Dela Rey Steyn Vaper and Mech Mod Enthusiast

    Threads:
    53
    Posts:
    3,840
    Country:
    South Africa
    Joined:
    23/10/17
    Gender:
    Male
    Location:
    Louis Trichardt
    Ratings:
    +22,678
    What grinds my gears is when they try and sell it as an original. That is just being fake, but being sold as a cheaper alternative, as a cloned product, not too phased personally. People still buy the Originals, it is brands with a cult following, producing exceptional quality products in limited numbers. They will always have their market. Other people are ok with having a product that might not use titanium or a cheaper stainless. They just want to experience it. With today's technology, there should be no difference in performance on most 1:1 clones. But I'm not going to delve into this too much. It's like a tradition, at least once a year the Clone Debate comes up on the forum, a big typing match ensues, people are mad at each other for weeks, and then we all move on and continue vaping as normal, those with clones and those without. If you are content to own a clone, get one, vape on and be happy.
     
    • Agree x 8
    • Winner x 3
    • Like x 1
    • Funny x 1
    • Can relate x 1
    • List
    Last edited: 11/3/21
  25. Munro31

    Not Rated Member

    0/5,

    Munro31 Dedicated Vaper

    Threads:
    13
    Posts:
    751
    Country:
    South Africa
    Joined:
    19/8/20
    Gender:
    Male
    Location:
    Witbank
    Ratings:
    +3,064
    Exactly!