VOOPOO Argus GT 160W TC Kit with PnP Tank

Discussion in 'Regulated Mod Reviews' started by Timwis, 2/9/20.

  1. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    Hi Ecigssa members, In this review i take a look at the Argus GT 160W TC Kit with PnP Tank from Voopoo. The VOOPOO Argus GT 160W TC Kit with PnP Tank was supplied for the purpose of this review by Ella from Sourcemore.

    https://www.sourcemore.com/voopoo-argus-gt-kit.html

    [​IMG]

    Introduction

    Voopoo after their slow start resting on the success of the Drag for a while which utilised the Gene Chip which became their property after the take over of Woody Vapes then went on to score countless own goals through their business ethics and dealings with others that pissed many people off including me. In the last couple of years they have become prolific and upped the anti when it comes to the quality of their products while still living on the edge when it comes to their marketing but seem to be making more of an effort to get the marketing and their general behaviour right.

    The Argus GT is their latest dual 18650 device powered by the Gene.TT chip which is paired with the Adapt PnP Pod Tank which basically allows the Drag X/S pods to magnetically fit inside a 510 adaptor which incorporates adjustable airflow. This compatibility between tank base, Drag X/S Pod and extensive PnP coil family is a real winner as cross compatibility is something we need more of. The device itself can of course be used with other tanks but the user interface is more akin to what we have seen on Voopoo's recent pod mods rather than their standard devices with Power, RBA and TC modes, let's check it out!

    ___________________________________________________________________



    In The Box

    [​IMG]

    Contents:

    Standard Edition

    1 x ARGUS GT Device
    1 x PnP Pod Tank (4.5ml)
    1 x PnP-VM5, 0.2ohm
    1 x PnP-VM6, 0.15ohm
    1 x Type-C Cable
    1 x User Manual


    TPD Edition

    1 x ARGUS GT Device
    1 x PnP Pod Tank (2ml)
    1 x PnP-VM5, 0.2ohm
    1 x PnP-VM6, 0.15ohm
    1 x Type-C Cable
    1 x User Manual

    [​IMG]

    ___________________________________________________________________



    Aesthetics and Ergonomics

    The Kit came housed in a military style strong plastic container which in turn is housed in outer cardboard packaging, love getting stuff in this sort of casing as it's just so useful for all sorts of vaping storage . All options have the same Black chassis with a speckled effect which i just don't get, when you look at the photos what looks like spots of liquid is actually the speckled effect which at first made me think i had a dodgy finish on mine until i found out that's how they are meant to be. Other than that Voopoo have done a great job both aesthetically and with the build quality producing a lightweight yet durable device.

    The device has a Zinc Alloy construction with different padded leather spine designs which sweep around to also cover 66% of the device's sides, at least on the website it's referred to as leather but they look like different fabrics. I received the Dark Blue version which has a Blue Denim spine with "ARGUS" embossed into the Denim, on one side we also have "VOOPOO" and two rows of stitching in an English Mustard colour which reminds me of the colour combo of an Aspire device many years ago, the two colours compliment each other so well. The padded spine section is fixed in place with a bracket which on mine is Black at the lower part and fuses into Silver in the top section, it's the colour and design of the Spines and colour of the bracket which differs depending on the option chosen which are the following, Carbon Fiber, Vintage Grey, Dark Blue, Black & Red and Black & Blue.

    The device is not that broad and with it's curved padded spine and lightweight i found it to be very ergonomic especially as a thumb firer in either hand. The face of the device has a rectangular fire button up top with round concave centre, this is followed by it's colour screen which in turn is followed by rectangular navigational buttons, finally at the bottom we have "Gene" printed in Silver. On one side of the device we can find the Type C silicone plugged socket and moving to the base we have the hatch door with grooves, branding and safety stamps.

    Moving up top we have an air fed 22mm stainless steel 510 plate with Gold plated, spring loaded 510. Apart from the random speckles in my opinion it's an handsome looking device but look at the photos to make your own minds up!

    [​IMG]

    ___________________________________________________________________



    Argus GT & PnP Tank Specs and Features:

    Size: 132.1 x 51.3 x 26.1mm
    Power Range: 5-160W
    Capacity: 4.5ml / 2ml (TPD)
    Resistance Range: 0.1-3.0ohm
    Output Voltage: 6.4-8.4V
    Battery: Dual 18650 (not included)
    Standard Coils: PnP-VM6 / PnP-VM5
    Compatible Coils All of PnP coils
    GENE.TT chip to ensure a stable performance
    Temperature control/Wattage adjustment
    Power, RBA & TC Modes
    Pod to Tank design
    Adjustable bottom airflow
    Thread: 510
    Colours: Carbon Fiber, Vintage Grey, Dark Blue, Black & Red, Black & Blue

    [​IMG]

    ___________________________________________________________________



    The Pod Tank

    The PnP Pod Tank is made up of the PnP Pod that was included with the Drag X/S devices and a Tank base section with 510 that mimics the bay of the Drag X/S allowing the Pod to magnetically fit into the base section to complete the tank.

    [​IMG]

    ___________________________________________________________________



    The Pod

    The Pod is rounded and one complete moulding, it's so slightly tinted it's almost clear and being one complete moulding gives me my first con being you can't use a drip tip of your choice. Looking at it's circular base we have 3 evenly placed strong magnets and a silicone bung kept attached with a metal stud. The bung has a flap which is easy to lift to pull the bung out revealing a very generous fill port plenty big enough for a quick, mess free fill, the standard pod holds 4.5ml of liquid while the TPD pod holds 2ml.


    [​IMG]


    The coil head just gets press fitted into the pod as is the case with most of these style of pods!

    ___________________________________________________________________



    Assembling The Pod Tank

    When looking into the base of the Pod tank it is just like looking into the Pod bay of the Drag X/S. The bottom of the base has the round central section visible with the rest of the floor which leads to the airflow slots being obscured by the perimeter having an upper metallic shelve for the pod magnets to attract too. Looking inside the bottom of the base we have a raised central positive and outer raised negative spring loaded contacts which look to have a silicone seal. When looking underneath the base section we have the 510 threading and it looks just like any standard tank. The base section has a dual cyclops AFC with no stopper but has knurling for grip and moves with a very nice tolerance.

    The pod snaps into place and fits very securely, the dual negatives and metallic surround shelf design means the pod can be fitted without it needing to be lined up a certain way, it was a good design as a Pod set-up with the Drag X/S and the design works equally as well with this innovative Pod Tank design!

    [​IMG]

    ___________________________________________________________________



    The Coils

    Included is 2 different coil heads none of which are pre-installed and both part of the Voopoo PnP range which are the coils used throughout the Vinci and Drag Pod Mod devices.


    The 2 included coil heads are the PnP VM5 0.2ohm mesh coil head rated between 40 - 60w and the other included coil head is the PnP VM6 0.15ohm mesh coil head rated between 60 - 80w.


    [​IMG]



    The Adapt PnP Pod Tank is compatible with the entire Voopoo PnP range which is quite extensive!


    [​IMG]

    ___________________________________________________________________



    Fitting The Batteries

    The Argus GT accommodates dual 18650 batteries that get fitted via the hatch door on the base of the device, just slide the door forward (there are grooves to help) and lift up. Not a lot of light get's into the battery compartment and orientation on the underside of the door is just embossed onto the contacts, i would like the orientation to be labelled much more clearly.

    When the door is shut we have no movement or battery rattle whatsoever, a really nice solid door!

    [​IMG]

    ___________________________________________________________________



    The Display

    I do usually describe the display in detail but will skim through it as you can see from the photos throughout the review and i am suffering with Man Flu so just taking the easy way out on this occasion.

    The Display is sharp, bright and colourful and has quite a different look between Power and TC working screens. I do feel the colour accents and large time of vape graphic is a little OTT and instead larger font and more information in the form of things like battery percentages would of been better, the display is very similar in look to the Drag X/S devices and in fact the whole user interface is more of a sophisticated Pod Mod set-up rather than standard device!

    [​IMG]

    ___________________________________________________________________



    Navigating The Argus GT

    The Argus GT has quite a basic board compared to other Voopoo Gene standard devices, in fact when using it felt more of a pod mod set-up which of course suits the PnP Pod Tank very well.

    The device can be turned on and off with 5 clicks of the fire button and once on fire and up locks and unlocks the whole device so it also will not fire, i can't find anyway of just locking the navigational buttons. Fire and down resets the puff counter and pressing all 3 buttons together brings up a screen showing the chip ID and level code which is actually left over from that immature award system that had a short lifespan!

    The device has 2 Power modes which are Smart mode which is the default and RBA which is actually just standard variable wattage and then the device also has TC mode. Each 3 clicks of the fire button changes modes between Smart, RBA and when moving to TC a screen comes up giving the option of Ni, Ti or SS. When on the TC working screen pressing up and down together brings up another screen were you can manually enter the TCR value, wattage and alter resistance before locking. Both wattage and temperature adjust in 1 unit increments which i like for wattage adjustment but not really sure if it's a con or a pros when it comes to temperature or whether it really matters, when holding the button down both wattage and temperature adjusts at the rate of knots!

    [​IMG]

    ___________________________________________________________________



    Protections:

    10s Overtime Protection
    Over-current Protection
    Reverse Polarity Protection
    Short Circuit Protection
    Over Discharge Protection
    Balanced Charging
    Overcharge Protection
    Over-temperature Protection

    [​IMG]

    ___________________________________________________________________



    Charging

    The Argus GT has Type C USB for data and balanced charging at 2A. The port has a silicone plug like we see on IP67 devices but adding a plug to keep dust out etc is a good idea and one i have seen on another couple of non IP rated devices of late.

    While charging the percentage of charge on each individual battery is given but no estimated charge time left, overall good feedback!

    [​IMG]

    ___________________________________________________________________



    My Experience Using The Argus GT Kit And Thoughts!

    First thing to say is i didn't test the TC and normally just wouldn't comment but i have heard there are a few unusual quirks regarding TCR values and i have been told despite this it works great in TC while the only actual review i personally read or watched said it didn't so if you are a TC user you need to get more information.

    The only other thing i clocked on the review i read was the reviewer experienced a 3.5v cut-off which is different to the approx 3.3v cut off i have been experiencing and while i would like this to be 3.2v as suggested in the manufacturers specs i have actually found battery life to be very satisfactory when comparing to other dual 18650 devices. The only other thing that i have been told which is something that just didn't affect me as i don't vape at silly wattage's is once going over 100w the device is underpowered and disappointingly falls a distance short of the 160w top wattage but hopefully it can be fixed with a firmware update as there is no reason why the device shouldn't be near as damn doing 160w.

    In my opinion how good this device is really depends on if you are using the device with the Adapt PnP Pod tank or standard tanks as it seems the user interface and smart wattage parameters are set to suit the PnP coils and i had quite a different experience when using an RTA. If using anything other than the Pod Tank i would suggest using the device in RBA mode which is basically variable wattage mode as the wattage's given by smart mode when using standard RTA's seemed way off what i would vape at with those builds, after saying that i used the device with a couple of RTA's in RBA mode and it worked great, firing instantly at set wattage and gave reliable performance.

    When using with the PnP Pod Tank the smart wattage works great and i used three different coils (including the two provided) and when detecting a new resistance it altered close to my required wattage and the other advantage is it only allows the wattage to be set up to a limit which suits the resistance of the coils and to be honest i don't know why anyone would want to vape the coils higher than their recommended limit as i find the Voopoo PnP coils are actually better for flavour nearer to their lower limits and some struggle to wick when upping the wattage.

    When it comes to flavour i can't be too specific due to as mentioned Man flu but they are the Voopoo PnP coils which give really good flavour so nothings going to be different with this set-up. As for the draw with the airflow wide open both supplied coils are full direct lung with the 0.2ohm having a touch of restriction while the 0.15ohm is full on! The airflow control ring with it's knurling is easy to adjust while the Pod Tank is on the device but i really don't notice any difference until it's half closed and then closing down further does start to give some restriction. The vape quality is very good but airflow while not being over turbulent for some reason does seem slightly more choppy than when using the pod with the Drag X/S.

    I do love the whole idea of cross compatibility and the Pod Tank has been implemented well, i did find removing the pod on the Drag X/S to fill a con but actually compared to unscrewing a top-cap just pulling the pod out while leaving the base attached to the device to fill works great! With all the Voopoo PnP coils they will slowly leak while the pod is left standing but while testing i simply removed the pod when not using the device and before putting the pod back into the base to use again dabbed inside the base with a bit of tissue to pick up any moisture and i haven't had any escaping liquid through the airflow slots or on the device which is a better result than i get with the Drag X/S but then the slots on the Pod Tank are raised slightly.

    Having Type C USB is a big pro so if you do need to charge in the device you can do faster and with much more confidence and the final con has to go back to the fact this is definitely designed as a kit which limits using other tanks without having overhang. The base of the Pod Tank is 24mm and sits absolutely flush so anything over 24mm will start to look a bit funky!

    [​IMG]

    ___________________________________________________________________



    Likes

    very good build quality
    Durable, rugged yet lightweight
    Comes in useful good quality military style hard case
    5 Colour options
    Padded spine
    Ergonomic
    Small dual battery device
    TC Mode (need more research if TC user)
    Display bright, sharp and colourful (feel just could be better set out)
    Smart mode works great with Pod Tank
    In both smart and RBA modes fires without delay and instantly hits set wattage
    Performed great at the wattage's i vaped at
    RBA Mode (variable wattage)
    Battery door fastens securely with no movement
    Pod Tank uses existing Drag X/S Pods
    Adjustable airflow
    Compatible with extensive range of PnP coils
    Very good flavour from Voopoo PnP coils
    Type C USB (port has silicone plug)
    2A balanced charging with feedback
    Firmware Upgradeable



    Cons

    Device underpowered over 100w (based on hear say, i don't vape high enough to test)
    Can't lock just navigational buttons
    Pod complete moulding so can't fit own drip tip
    Slight coil leakage (can be controlled)
    Default smart mode only really suits PnP coils (just what i experienced)
    Airflow with PnP Pod Tank slightly choppy
    Any Tank over 24mm will have overhang
    Poor battery orientation labelling
    Feel display could have some information in larger font and more info given (some might find a lot of colour aesthetically pleasing)

    I would once again like to thank Ella from Sourcemore for supplying the Argus GT Kit for the purpose of this review, thanks for reading and stay safe!

    https://www.sourcemore.com/voopoo-argus-gt-kit.html

    ___________________________________________________________________
     
    • Winner Winner x 6
    • Like Like x 2
    • List
  2. ddk1979

    Excellent Member

    5/5, 6 votes

    ddk1979 All Vaped Out

    Threads:
    75
    Posts:
    3,068
    Country:
    South Africa
    Joined:
    16/5/16
    Gender:
    Male
    Location:
    Cape Town
    Ratings:
    +16,029
    @3avape have Daily Flash Sales between 12.30 pm and 3.30am South African time (GMT +2).
    There are some ridiculously low prices on items, e.g. Mod and tank kits for less than $5, but they go fast so you have to be quick and early to grab them.
    https://www.3avape.com/3avape-daily-deals.html

    I was asked to review the VOOPOO Argus GT 160W TC Kit with PnP Tank and this was supplied to my by Tina from @3avape .

    @Timwis has done an excellent review above so I will leave out all the specs and features and will be concentrating on my experience with the kit.

    11a.jpg . 12.jpg


    • First off, I really like that the kit comes in a very sturdy military style case and I'm certain one can find many uses for this.

    • Size and Comfort - the mod is smaller and much more comfortable than my Vaporesso Gen mod because the spine of the mod (the side opposite the fire button) is rounded and padded. If your hands are on the smaller side, you are going to love how it feels in the hand. I fall into this category and always struggle to press the fire button with the pad of my thumb because I have to bend my thumb at an extreme and awkward angle. i thus end up pressing the fire button with the bones at the thumb joint.

    • The mod has worked very well in the short time that I've used it (4 days). I have had some bad experiences with another mod where a similarly located battery door at the base of the mod used to pop open quite regularly. The battery door of the Argus GT is solid and stays shut once closed with no battery or door rattle. The labeling for the battery orientation needs to be improved as it is difficult to read.

    • The Menu : 3 clicks gets you from Smart mode (default) into RBA mode (VW). Another 3 clicks gives you to the option to select either, Ni, Ti or SS but, once you have scrolled to the required material, you have to HOLD the fire button (NOT 1 click and also NOT 3 clicks) to get into TC mode (initially I thought that there was a problem with the device).

    • TC Mode : While one has the option to select either, Ni, Ti or SS, I have found that both the Argus GT and the Drag will work in TC mode even if you have a Kanthal or Ni80 coil fitted. To test the mod with a tank other than the PnP one that comes with the kit, I currently have a 0.7 ohm Ni80 coil in a SXK Kayfun Prime on the mod. I find that I am getting a great vape at 275F after selecting SS ??? ... @Alex , @KZOR and all the other fundis, can you please comment on this.

    • The Pnp Pod : Although I am a mtl vaper, I really enjoyed the flavour on this pod. It has been covered by many other reviewers so I will not repeat the comments, but I have to reiterate the coil leakage issue that occurs when the pod is left standing for some time (overnight for me). This is rather annoying for a pod that works so well and should have been picked up during testing. I've got my own solution (see pic), but this should not be the solution to a possible coil design error.
    5a.jpg


    • There is a very tiny gap between the pod and the mod, something I didn't notice until I actually studied the pics I had taken in detail. It is so small that it is hardly noticeable.

    My thanks to Tina (@3avape ) for supplying the Argus GT Kit for the purpose of this review.
    Comments will be greatly appreciated. Thanks.

    .
     
    • Winner Winner x 3
    • Like Like x 2
    • List
    Last edited: 21/11/20
  3. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    I do find i prefer the PnP pod better in the adaptor than in the drag X itself!
     
    • Agree Agree x 1
    • Informative Informative x 1
    • List
  4. ddk1979

    Excellent Member

    5/5, 6 votes

    ddk1979 All Vaped Out

    Threads:
    75
    Posts:
    3,068
    Country:
    South Africa
    Joined:
    16/5/16
    Gender:
    Male
    Location:
    Cape Town
    Ratings:
    +16,029

    @Timwis , I have read quite a few comments regarding the adapter giving problems after a while and needing regular replacement.
    I think @VOOPOO missed a trick by not developing and selling their own adapter since it has become a mini cash-cow.

    .
     
  5. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    I love the flavour from the PnP coils but agree completely the coils are more leaky than most PnP coils from other manufactures. A lot of vapers haven't had issues with leaking on Ecigssa but posting on so many forums that's not the general experience i get from vapers and the Drag X/S especially should come with a free bog roll!
     
  6. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    If that's a 510 adaptor? i don't have one. I do have one for the Vinci/VinciX but not drag X/S but agree 510 adaptors are popular so if the manufacturer doesn't release one a third party will and then Voopoo have no control over quality. I think these pod mods should now all come with a 510 adaptor in the kit from the off like with the Oumier Voocean 80, a much better deal and convenience for the vaper!
    I was talking about the adapt PnP adaptor! Why have people been having issues with it?
     
  7. ddk1979

    Excellent Member

    5/5, 6 votes

    ddk1979 All Vaped Out

    Threads:
    75
    Posts:
    3,068
    Country:
    South Africa
    Joined:
    16/5/16
    Gender:
    Male
    Location:
    Cape Town
    Ratings:
    +16,029

    I'm refering to the Reekvape Rouk 510 adapter (https://www.3avape.com/reevape-ruok-510-adapter-for-voopoo-drag-s-drag-x-mod.html) that allows you to use other rta's on the mod.
    I can't recall the exact problem with them, but read a number of comments regarding some issues.

    .
     
  8. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    Yeah the initial quote you responded too i was referring to the adapt adaptor but yes if a manufacturer leaves the door open for a third party to jump in they have no control so agree with your point!
     
  9. Munro31

    Not Rated Member

    0/5,

    Munro31 New Vaper

    Threads:
    3
    Posts:
    46
    Country:
    South Africa
    Joined:
    19/8/20
    Gender:
    Male
    Location:
    Witbank
    Ratings:
    +157
    Hi @ddk1979 , my vinci leaked like a old diesel truck, but when I got the drag x I took the pod off and turned it upside down every evening, never had a problem since. I also want to add that when you wick your rta for example its always at its best flavour right on the limit of wicking too little cotton and being in danger of leaking, maybe the same applies here with the pnp coils?
     
  10. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    I know your comment wasn't addressed to me but boy doesn't the Vinci leak!! At the time i tested both the RPM40 and Vinci and the RPM was better mainly because of that very issue but it's the Vinci that got more hype for some reason. Yes i wouldn't trust a pod left attached to the Drag X/S overnight they are dodgy coil heads yet give great flavour. The problem is you are right if you vape at the lower end they wick too well and you get leaking but you must have the balance right at the higher end of the wattage limit of not vaping too often because they also leak if the e-liquid gets hot and thins so not much margin for error!
     
    • Like Like x 1
    • Informative Informative x 1
    • List
  11. Munro31

    Not Rated Member

    0/5,

    Munro31 New Vaper

    Threads:
    3
    Posts:
    46
    Country:
    South Africa
    Joined:
    19/8/20
    Gender:
    Male
    Location:
    Witbank
    Ratings:
    +157
    And I think this is the big problem, with so much variation in juice % and ppl doing diy it mist be a nightmare to produce proper wicking coils! If you put best @70/30 you risk losing out on sales as the compitition doesnt recommend any such thing! Plus I do tend to chain vape when Im watching TV and that is always a recipe for premature.....
     
  12. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    That's what's great about the investment Freemax put into tying different wicking materials and combinations to produce coils that both don't leak as the wicking holds the liquid much better rather than it dripping when saturated and also longevity is off the scale compared to other stock coils!
     
    • Agree Agree x 2
    • Like Like x 1
    • List
  13. Munro31

    Not Rated Member

    0/5,

    Munro31 New Vaper

    Threads:
    3
    Posts:
    46
    Country:
    South Africa
    Joined:
    19/8/20
    Gender:
    Male
    Location:
    Witbank
    Ratings:
    +157
    N
    Nothing like sucking on organic pulp to get vapers excited! Hahaha
     
  14. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    Works though, great flavour, longevity and you would need to leave a full tank standing for weeks to get any sort of leaking!
     
    • Agree Agree x 2
    • Informative Informative x 1
    • List
  15. Timwis

    Excellent Member

    4.83333/5, 6 votes

    Timwis Vaping Addict ECIGSSA Donor

    Threads:
    646
    Posts:
    3,694
    Country:
    United Kingdom
    Joined:
    30/7/17
    Gender:
    Male
    Location:
    Bolton
    Ratings:
    +10,618
    The VXV Soulmate RDTA PnP pod also fit's both inside the Drag X and the Adapt Adaptor. It makes the airflow redundant on both the Adapt adaptor and Drag X but has it's own independent adjustable airflow giving both a leak resistant and rebuildable option and also allows for a tighter draw!
     
    • Agree Agree x 1
    • Informative Informative x 1
    • List