Dead Siren 22mm

Spongebob

Vaping Enthusiast
LV
31
 
Joined
25/3/16
Posts
823
Awards
23
Age
54
Location
Heidelberg gauteng
Need some help from the technical minded vapers recently traded a Siren 22mm from someone (brand new) that somehow came DOA? Worked 5 minutes and then started with the dreaded "no atomizer" on all my mods? Tinkered around but could not find anything? Tried someone else's advice and used thicker wire and swapped the grub screws and it worked for a day and a half and then started acting up again and has now passed on

I have checked 510 screw, coil seating, grub screws, everything i can think off, but no luck even had a multi meter on it, but could not find anything even tried running coil wire directly from one grub screw to the other, but nada



Is there anything anybody else can think of that i can check., because in all my years of vaping, the siren 22 is the best vape i have ever hadand if at all possible i would REALLY like to get her back to life?

Sent from my LYA-L09 using Tapatalk
 
2019-06-02 17.56.27.png [QUOTEarrowpongebob, post: 785764, member: 6433"]If i knew which joint i would

Sent from my LYA-L09 using Tapatalk[/QUOTE]
Bottom arrow2019-06-02 17.56.27.png
 
Flavour beast back in operation since the "disconnect" was between the two arrows in the previous pics I took some 26 gauge kanthal wire and wrapped it in a spiral between the two arrows and it workedall connections now talking to one another
06e1d78be61f1a7c03f6237afd7ede7b.jpg


Sent from my LYA-L09 using Tapatalk
 
Flavour beast back in operation since the "disconnect" was between the two arrows in the previous pics I took some 26 gauge kanthal wire and wrapped it in a spiral between the two arrows and it workedall connections now talking to one another
06e1d78be61f1a7c03f6237afd7ede7b.jpg


Sent from my LYA-L09 using Tapatalk
Awesome bro. Happy you found the problem. My theory is still, that there is gunk in that joint/s. At least you have it working. Still check if you can have it soldered by a jeweler. They have all the fine metal working tools and they can do it neatly.
Happy vaping!
 
What is the resistance on your atty with the wire wrapped around it?
Idoes it match the coil resistance or is it slightly more?
 
Flavour beast back in operation since the "disconnect" was between the two arrows in the previous pics I took some 26 gauge kanthal wire and wrapped it in a spiral between the two arrows and it workedall connections now talking to one another
06e1d78be61f1a7c03f6237afd7ede7b.jpg


Sent from my LYA-L09 using Tapatalk

Well done @Spongebob for getting the comms going!
 
Nah, she died again I'm telling u there's a spook in this one works for a while but the moment i touch something, it dies this time I just opened the airflow and gonk.... Off to lala land

Sent from my LYA-L09 using Tapatalk
 
And nothing if you re adjust the airflow?
Nah, she died again I'm telling u there's a spook in this one works for a while but the moment i touch something, it dies this time I just opened the airflow and gonk.... Off to lala land

Sent from my LYA-L09 using Tapatalk
 
@Spongebob dont know if you've given up or fixed your siren yet, but here's an exploded view of my 24mm.
The section between the red arrows seems to be a solid SS piece and should measure 0 ohms between the 510 threads and top section where the coil mounts.
Likewise when assembled the section from the gold 510 screw to the top section between the green arrows should also measure 0 ohms.
Dont know if this is of any help but I dont figure the 22mm should be very different from the 24mm.

siren 24mm.JPG
 
@Spongebob dont know if you've given up or fixed your siren yet, but here's an exploded view of my 24mm.
The section between the red arrows seems to be a solid SS piece and should measure 0 ohms between the 510 threads and top section where the coil mounts.
Likewise when assembled the section from the gold 510 screw to the top section between the green arrows should also measure 0 ohms.
Dont know if this is of any help but I dont figure the 22mm should be very different from the 24mm.

View attachment 170713
Thanks buddy will have a look when i tackle it againgiving it a rest for now

Sent from my LYA-L09 using Tapatalk
 
Back
Top