Recent content by Boeriemore

Thanks. Will do.

Hi, I am looking for another battery, the ones with the variable voltage setting, the eGo-C Twist. I have tried to send eCiggies an email asking if they can help but it is unable to be delivered. The mail address I use is info@eciggies.co.za but it keeps on returning undelivered.

It is better, but not perfect. It was fine throughout the duration of the battery's charge. I have just replaced the battery and screwed the cap closed but the display did not come on. I unscrewed it and started tightening it again and got to a point where it came on. Still holding thumbs...

I hope I'm not speaking too soon but here goes. I realize now that a terminal or thread can look clean and shiny yet be the problem. First "low atomizer"display turned out to be the 510 thread. It appeared spotless but I used lemon juice on it and the problem was solved. I read a post from...

Right, the battery slides down into the sleeve. At the bottom is a raised flat positive terminal. The cap that screws down has the negative terminal protruding. On fitting a re-charged battery, common sense tells me that the more the cap is tightened the better the connection. Not so with my...

Okay. Thanks. I have just used a drop of lemon juice on the thread of the mod and a tank and it is working again. What is strange is that the 510 thread appeared to be clean and shiny, no sign of discoloring.

Suddenly any tank I connect to the Pico, battery fully charged, gives me that notice even though the tanks work on my other mods. A feasible explanation would be most welcome. Edit: Sorry, that should read atomizer.

All the mods I have ever had have been temperamental with a mind of their own. Today it decided that it will work. No more 9.99 ohm flashing. It did not ask if a new atomizer had been fitted, it simply started working. I am using it now but wonder what tomorrow holds.(or the next hour) From new...

The connector is not stuck. I do not know if this problem is any way related to the problems I had from the start. The tank has large air flow holes which leaked juice like a sieve. Eventually the juice found its way into the mod discoloring the white battery display. It finally resulted in a...

Kangertech top box mini.

The manual states this is caused by a bad battery connection or atomizer. With no tank fitted it flashes. Fitting three different tanks which all work on another mod it still flashes. I am stuck so any help would be appreciated.

guess we'll never know. Anyway the mod is stuffed. Can't remove the juice from within.

This does not apply in my case. Originally I used the SS coil then the Nichrome coil and finally the Clapton coil which is still in use. For a few months leaking occurred with all the coils but now after a week connected to my Eleaf Pico no trace of a leak from the large air flow holes.

I don't believe anyone can provide a feasible explanation. I would love to hear what Sir Vape has to say.

As stated, I fitted the tank to the new mod just as it was when the heating problem occurred. Same coil, same wick, same liquid ans it is not a RBA.