All Things Reo

[johan]

BIG UPS for @huffnpuff for the smooth transaction , I can now finally say I am the proud owner of a Reo !

Beauty! (I like the Spyderco as well) - please post pic in the Reo Mail thread as well so that we can stick an Official Reo Badge on your forehead .

 

[Daniel]

Beauty! (I like the Spyderco as well) - please post pic in the Reo Mail thread as well so that we can stick an Official Reo Badge on your forehead .

@Andre thank you for the help without it I would not have had the opportunity to own a Grand (incoming!)

@johan will do once I receive the Grand

 

[Alex]

BIG UPS for @huffnpuff for the smooth transaction , I can now finally say I am the proud owner of a Reo !

Wow, I love your knife.

 

[Daniel]

Wow, I love your knife.

Thanks , this one is a keeper Spyderco Military S90V CF best EDC knife on the planet ! Keeps an edge forever and amazingly light for a 4" blade .... the Reo Mini is so small but this knife carries even smaller , amazing! *did I use amazing too much?*

 

[Alex]

Thanks , this one is a keeper Spyderco Military S90V CF best EDC knife on the planet ! Keeps an edge forever and amazingly light for a 4" blade .... the Reo Mini is so small but this knife carries even smaller , amazing! *did I use amazing too much?*

Amazing knife

 

[Jakey]

Amazing knife

@Alex if you into knives and looking for a avatar of a woman who can yield one pretty well, how about lagertha from vikings, whill whoop the heck outa Mrs lawrence......

 

[Genosmate]

I'm on the other side of this story, I can't for the life of me get my old magnets out. The old and look a bit grubby and need replacing. Tried the acetone trick. A good couple of whacks on the corner of a table. A super strong magnet to pull it out. None of the tricks posted on ecf work. These things have really taken root.

If they still work but are just a bit grubby,then use a fine scotchbrite pad or some wet and dry to bring up the finish again,it won't do anything to harm the magnet.

 

[Alex]

@Alex if you into knives and looking for a avatar of a woman who can yield one pretty well, how about lagertha from vikings, whill whoop the heck outa Mrs lawrence......

Well you should see how cool my desktop background looks right now

 

[Daniel]

HEY Lagertha is my Reo's new name .... steady now ...

What did you have to do to prepare for the physical side of this role?

WINNICK: Well, I started training in martial arts when I was 7 years old. I got my first black belt at 13. I started my own martial arts school at 16. And by the time I was 21, I had three different schools. So, I grew up having a very physical background. I’m a 3rd degree black belt in Tae Kwon Do and 2nddegree in karate, and I’m a licensed bodyguard.

 

[Jakey]

Well you should see how cool my desktop background looks right now

Show show show. Include ur reo in the pic so we conform with the thread topic.

 

[Jakey]

HEY Lagertha is my Reo's new name .... steady now ...

Want your reo already, dont even wanna know more

 

[Gazzacpt]

If they still work but are just a bit grubby,then use a fine scotchbrite pad or some wet and dry to bring up the finish again,it won't do anything to harm the magnet.

Thanks man but the chrome has started coming off. No amount of scrubbing is going to help. This close to a 2 year old reo, I think it was one of @Andre 's first ones that found its way to @RIEFY then on to @steve and now in my grubby little paws.

 

[Andre]

Thanks man but the chrome has started coming off. No amount of scrubbing is going to help. This close to a 2 year old reo, I think it was one of @Andre 's first ones that found its way to @RIEFY then on to @steve and now in my grubby little paws.

Ok, so do I understand correctly - the magnets have a chrome finish, which eventually wears off? And now it looks bad and you want to replace them? But you cannot get the little bastards out?

 

[Genosmate]

Thanks man but the chrome has started coming off. No amount of scrubbing is going to help. This close to a 2 year old reo, I think it was one of @Andre 's first ones that found its way to @RIEFY then on to @steve and now in my grubby little paws.

Just try,it will work believe me and its easier than replacing them.heres a couple of pics for you.The first one is my very first Reo (I polished it a while back) and I've just rubbed the right hand side magnet with a cloth.the second one is one I modified,I can't remember where I got it from,you can polish those magnets.

 

[Gazzacpt]

Ok, so do I understand correctly - the magnets have a chrome finish, which eventually wears off? And now it looks bad and you want to replace them? But you cannot get the little bastards out?

Yes sir. Peels off.

 

[Andre]

Yes sir. Peels off.

Sent the modmaster a PM to see if he has a solution. Shall let you know.

 

[Gazzacpt]

Thanks @Andre. I might have to resort to powertools but I am a bit worried about the thickness of the door and messing up the magnet recepticals. Magnets are very hard compared to the alu surrounding it.

 

[VapeSnow]

Hi Reonauts

This is my two beauty's

Sent from my iPhone using Tapatalk

 

[Andre]

Thanks @Andre. I might have to resort to powertools but I am a bit worried about the thickness of the door and messing up the magnet recepticals. Magnets are very hard compared to the alu surrounding it.

@Gazzacpt here is the modmaster's answer. Hope it helps.

He can try heating the magnets with a soldering iron . Once there hot the glue should loosen its hold . Try smacking the back side of the door on a hard surface .

If this fails they can be drilled out its a little tricky . Magnets once drilled will crack enough you can get under the magnet and pry it out.

He could easily clean the back side of the door with a fine grit sand paper like 600 or 800 grit .

 

[Gazzacpt]

@Gazzacpt here is the modmaster's answer. Hope it helps.

He can try heating the magnets with a soldering iron . Once there hot the glue should loosen its hold . Try smacking the back side of the door on a hard surface .

If this fails they can be drilled out its a little tricky . Magnets once drilled will crack enough you can get under the magnet and pry it out.

He could easily clean the back side of the door with a fine grit sand paper like 600 or 800 grit .

Thanks Oom

Ek sal die naweek 'n beitjie speel en sien of ek kan regkom.

 

[VapeSnow]

I would like some help for the perfect built in the derringer rda.

For the last 4 months i was rocking box mods so to set the watts was a click away.

Mech mods is all about the coils. So please any tips will be greatly appreciated.

Im looking for WARM dense flavor, a lot of vapor and coils that don't take long to warm up. What gauge is the best and what ohms.


Sent from my iPhone using Tapatalk

 

[Andre]

I would like some help for the perfect built in the derringer rda.

For the last 4 months i was rocking box mods so to set the watts was a click away.

Mech mods is all about the coils. So please any tips will be greatly appreciated.

Im looking for WARM dense flavor, a lot of vapor and coils that don't take long to warm up. What gauge is the best and what ohms.
Sent from my iPhone using Tapatalk

Try this thread and maybe ask any questions there: http://www.ecigssa.co.za/the-bf-derringer-thread.t9551/

 

[VapeSnow]

Try this thread and maybe ask any questions there: http://www.ecigssa.co.za/the-bf-derringer-thread.t9551/

Thx Andre


Sent from my iPhone using Tapatalk

 

[VapeSnow]

I found the perfect built for me on a Reo

Coils dont take long to warm up and can take three big big vapes before i need to sqounk again.

Hope i spelled sqounk correct


Sent from my iPhone using Tapatalk

 

[Silver]

I found the perfect built for me on a Reo

Coils dont take long to warm up and can take three big big vapes before i need to sqounk again.

Hope i spelled sqounk correct


Sent from my iPhone using Tapatalk

Nic coil specs
Shees, 0.3 ohms is a bit vicious. Enjoy
You didnt spell squonk correctly. The u goes before the o