What Do You Think Of This

[Riaz]

howsit guys

so im settling for this setup- let me know what you think

ego slb + igo L

thoughts? advice?

much appreciated

 

[Sharrivz]

I dont know enough about the igo to be honest, the SLB is a great little battery for its price point though

 

[iPWN]

It will work but just remember to keep your ohm's above the minimum limit for the SLB , correct me if i am wrong but it should be 1.2 ish ohm's.

To get the most out of your Igo L i would suggest using it on a mech mod with quality AW or Efest IMR 18650 10 amp batt's or even the 30amp efest's if you plan on going super low ohm's .

Perfect atty for me on the SLB would be a Kanger Protank2 mini. HTH

 

[Andre]

I totally agree with iPWN. Also bear in mind that the Igo-L is a dripper, so you have to have a bottle of juice at hand to drip from time to time. It is a very good dripper though.

 

[ET]

+1 on the igo-l. it's what i will be getting as my first dripper. not hard on the wallet and loads of rave reviews for it all over the web. good stuff

 

[Riaz]

im taking this step into the world of vv/vw and dripping

bare in mind i dont have any experience in this, so this will be my first.

i think its a good starting point?

ive read great reviews on the igo, and it being a great start for beginners.

then after seeing gizmos review on the slb, i decided to take that battery.

as a side note, im buying this for my birthday LOL, so it will have to wait till the 10th of december.

my wife doesnt want anything to do with me and my vaping so this will be my present to myself

 

[Silver]

Great stuff and good luck riaz

I am also keen on getting the igo

Where are you going to get it from? Who stocks it?

 

[eviltoy]

Hmmm are you chasing clouds?

 

[Riaz]

Great stuff and good luck riaz

I am also keen on getting the igo

Where are you going to get it from? Who stocks it?

im getting the igo from fast tech and the slb from skyblue.

i no the igo will only arrive sometime next year, but ive got my pro tank to use on the slb so long.

Hmmm are you chasing clouds?

a little of both- clouds and TH, why do you ask?

 

[eviltoy]

Chasing clouds then get a mech mod. You going to get one eventually in any case

 

[Silver]

Would the mech mod only help in chasing clouds eviltoy?
Surely it will have an effect on Throat hit?

 

[Silver]

Good luck with the orders Riaz !

 

[eviltoy]

Would the mech mod only help in chasing clouds eviltoy?
Surely it will have an effect on Throat hit?

With a dripper TH is more pronounced thats why most drop the nic level when they drip. In my opinion you will never get the same results as a mech mod with a mechanical device with a dripper.

 

[Riaz]

Chasing clouds then get a mech mod. You going to get one eventually in any case

you know how it goes, this road NEVER ends!!!

 

[eviltoy]

LOL I only roll mech mods now less hassle and you can build alles with it

 

[Riaz]

LOL I only roll mech mods now less hassle and you can build alles with it

i will get there eventually LOL

one of the other reasons im getting the elect mod is because i can use that to check the ohms of the coils im going to start building also

 

[eviltoy]

ohm meter works better cos you can use it as a base to build on

 

[Riaz]

ohm meter works better cos you can use it as a base to build on

whats the difference between using an ohms meter as apposed to the one built in on the slb?

 

[eviltoy]

ohm meter is a good comfortable base to build on and gives you the exact ohm reading

 

[Riaz]

ohm meter is a good comfortable base to build on

sorry for all the questions, but what exactly do u mean by this?

have you experienced a difference in readings between the ohms reader and an elect mod?

 

[eviltoy]

You get a more accurate reading yes. My svd use to be .3 off. When you rebuild a attomiser its quite crap building it on a mod as a base its easier to build when its screwed onto a ohm reader

 

[Riaz]

You get a more accurate reading yes. My svd use to be .3 off. When you rebuild a attomiser its quite crap building it on a mod as a base its easier to build when its screwed onto a ohm reader

why do u rebuild the atty on the mod? or on a base?

why not build it separately and connect to the mod afterwards to check the ohms?

 

[eviltoy]

lol that just gave away that you have never build a rebuildable yet. its a pain to do it without it screwed somewhere

 

[Riaz]

yes bru, this would be my first

is it that obvious LOL

thats why i have you guys here to help and guide me thru the way

 

[ET]

if you want to try out dripping and you have a protank ...