Ceramic wicking for geni
- Thread starter HPBotha
- Start date
Nope not locally, and USA ban on exporting - you need a good contact in USA willing to take the risk to buy at rba supplies and send over to you.
http://www.rbasupplies.com/READYxWICK.html
I tried to get some last time I went over but no luck 
That is probably the hard ceramic? From Zivipf.de? If the soft braided ceramic please share the source.
I have some 7x19, 1.5 and 3.0 mm stainless steel wire rope if you want. Tell me the length of the wick you need as you need a special pair of cutters to cut them.
I would be very surprised if you find some other than at rbasupplies or highdessertvapes. Many of us would welcome a find though.
ja.... pappa hettie sukses nie. and has a headache... so which is better then? porous ceramic, steel rope and rayon, rayon only? Have no clue how to work with geni's but am getting in a SAT22 clone to play around with --- and cannot find course enough mesh for high VG liquid --- so any advice on sourcing a solution would be appreciated!
viable alternative according to omega.com (original manufacturer of the ceramic rope used by RBAsupplies.com):
XS Silica Material
XS-116-25 $68.75 25 feet, 1/16 inch, Silica Sleeving
OK... so if anyone has a kiln or a brick kiln....
http://www.mcmaster.com/#ceramic-rope/=ukehfs
http://www.ceramicfiber.net/ceramicfiberrope.htm
http://www.vitcas.com/ropes-tapes-textiles-insulation
Chinese version --- http://www.made-in-china.com/showro...Wick-for-E-Cigarette-Rebuidable-Atomizer.html
or locally:
http://www.brights.co.za/product.php?main=GENERAL+HARDWARE&sub=ROPES+&+CORDS
viable alternative according to omega.com (original manufacturer of the ceramic rope used by RBAsupplies.com):
XS Silica Material
XS-116-25 $68.75 25 feet, 1/16 inch, Silica Sleeving
OK... so if anyone has a kiln or a brick kiln....
http://www.mcmaster.com/#ceramic-rope/=ukehfs
http://www.ceramicfiber.net/ceramicfiberrope.htm
http://www.vitcas.com/ropes-tapes-textiles-insulation
Chinese version --- http://www.made-in-china.com/showro...Wick-for-E-Cigarette-Rebuidable-Atomizer.html
or locally:
http://www.brights.co.za/product.php?main=GENERAL+HARDWARE&sub=ROPES+&+CORDS
If you find any ceramic wick please let me know, I am getting my RSST over the weekend and keen to give it a go.
No not at all! I had quite mixed results with Genies; the stainless steel rope gave me a nasty metallic taste. At the end I went back to stainless steel mesh with Ekowool over the top part between mesh and coils. I did try the 3mm ceramic wick (courtesy of @Andre) on its own in the Geni, but could never get it 100% right (worked wonders when used same as with Ekowool, as described). Another member with maybe much more experience on Genies is @thekeeperza - I know he also used stainless steel cable/braided rope, and as far as I can remember he also didn't like the metallic taste.
not the place, (I know) but all the other factors aside, if the REO is really the ultimate vaping mod, then i'm not ready for one.
I am still exploring the wonderful vaping world and a Ultimate Vape Device (to be called UVD from this point) would would spoil the journey I would think.
For me, getting a UVD now would be like watching the introduction of a movie, falling asleep, and waking up to the protagonist celebrating his victory and the salvation of mankind...
I have only just begun vaping on a subohm coil... I have only just begun to venture out of my palate's comfort zone. I have only just been accepted as kinda cool with my MVP and Mech mod... it's just...too...soon.
I am still exploring the wonderful vaping world and a Ultimate Vape Device (to be called UVD from this point) would would spoil the journey I would think.
For me, getting a UVD now would be like watching the introduction of a movie, falling asleep, and waking up to the protagonist celebrating his victory and the salvation of mankind...
I have only just begun vaping on a subohm coil... I have only just begun to venture out of my palate's comfort zone. I have only just been accepted as kinda cool with my MVP and Mech mod... it's just...too...soon.
Off course, one must always enjoy the journey - much more important than getting to the destination.
