Exvape Expromizer V4 MTL RTA

[Viper_SA]

Still vaping it like that. All I changed was pushing the coil down a tad to try and get a tighter draw. It worked, so I'm happy. It's a very different draw compared to the Pioneer though. Especially being so damn quiet, lol.

 

[Intuthu Kagesi]

Not so much compact as lightweight and an absolute pleasure to use... View attachment 224557

I'm intrigued by your "pipe tip" / extension ... How was it made? and what is the draw and flavour like? ... mind you, do you use pipe tobacco flavours too?

 

[ddk1979]

@Viper_SA , the Expro with bubble glass fits on the Pico 25

 

[Viper_SA]

Does anyone know if the V4 will fit on a Pico 21700 with the bubble glass on? Could possibly get my hands on one, but I'm not sure how high the battery cap is on the 21700.

 

[CJB85]

Does anyone know if the V4 will fit on a Pico 21700 with the bubble glass on? Could possibly get my hands on one, but I'm not sure how high the battery cap is on the 21700.

It takes 25mm atties and the cap looks to be lower than the Swag 2. My guess is that it will be absolutely fine.

 

[CJB85]

Does anyone know if the V4 will fit on a Pico 21700 with the bubble glass on? Could possibly get my hands on one, but I'm not sure how high the battery cap is on the 21700.

According to this, the cap is 8mm high.

 

[Viper_SA]

Was it at least enjoyable on the wicking job I did? I was worried that I pop something in there and it’s absolute trash when you use it!

It takes 25mm atties and the cap looks to be lower than the Swag 2. My guess is that it will be absolutely fine.

Could I trouble you and ask if you could measure the height of the Swag's cap for me so I can compare the two heights please?

 

[Munro31]

I bought it from Fasttech when I bought the tank. Sadly they seem to be sold out everywhere.

My luck! I suck mine dry in a hour!

 

[Viper_SA]

According to this, the cap is 8mm high.
View attachment 224589

So that makes it 8mm. Now I just need to compare if with a Pico 25 or the Swag 2 which I know it fits on.

 

[CJB85]

So that makes it 8mm. Now I just need to compare if with a Pico 25 or the Swag 2 which I know it fits on.

Swag 2 cap height is somewhere between 11 and 12mm...

 

[Viper_SA]

Really need a new mod to properly test it out 100%. The damn DNA was traded back when just before I quit vaping and started smoking again. Never really used it that much due to the 40W limit on DL. Today it showed it's true colors. Battery jumps around. Shows full, then empty and then suddenly 50% again and so on. Resistance jumps around as well. From 1 ohm to 0.8 ohm and the next moment it's precisely 0.89 ohm

Guess I know why it was traded in such a sweet deal back then

With the RTA I have no issues at all. No leaking on refills and great flavor. Just working on getting a slightly tighter draw still, lol.

 

[Viper_SA]

So, I just popped in a new coil (to make sure it was the DNA mod giving me shit) and rewicked myself. Still running at 18W and 1 ohm. First wicking attempt flooded the deck, but I think I accidentally opened the JFC. Then I sommer swopped out to the bubble glass, rewicked again with CB V2 and she tastes great, no gurgling, no leaking just great flavor and a bit of a tighter draw. Running the coil very low on the deck.

Will update if things go pear-shaped, but for now I'm very happy. Just need a coil closer to 0.7 - 0.8 ohm which is what I prefer for MTL really.

 

[Dela Rey Steyn]

So, I just popped in a new coil (to make sure it was the DNA mod giving me shit) and rewicked myself. Still running at 18W and 1 ohm. First wicking attempt flooded the deck, but I think I accidentally opened the JFC. Then I sommer swopped out to the bubble glass, rewicked again with CB V2 and she tastes great, no gurgling, no leaking just great flavor and a bit of a tighter draw. Running the coil very low on the deck.

Will update if things go pear-shaped, but for now I'm very happy. Just need a coil closer to 0.7 - 0.8 ohm which is what I prefer for MTL really.

Get a BVC MTaLien, you will not be disappointed! @charln should be able to guide you in the right direction on where to buy it.

 

[Viper_SA]

Get a BVC MTaLien, you will not be disappointed! @charln should be bke to guide you in the right direction on where to buy it.

Thanks, but I must admit, the longer I vape it, the better the flavor gets. Starting to really like it now at 1 ohm... and I still have 2 spare coils exactly the same from @CJB85

 

[CJB85]

Thanks, but I must admit, the longer I vape it, the better the flavor gets. Starting to really like it now at 1 ohm... and I still have 2 spare coils exactly the same from @CJB85

Enjoy those MTL staples, but 100% look at getting some BVC aliens from @charln like @Dela Rey Steyn suggested. It’s absolutely worth it and at MTL wattages the coil will last you months. I benched mine today to save it for more deserving liquids, I just popped a simple MTL clapton to match a simple DIY juice!

 

[Viper_SA]

I have spoken to @charln earlier this week or last week. He is working on some recommendations for me for all my tanks, rda's etc. I'm too lazy to make my own coils and even with the fancy wire I never get them wound tight enough really

 

[Dela Rey Steyn]

@LeislB

 

[DarthBranMuffin]

@LeislB

 

[Intuthu Kagesi]

Thanks for that ... I cut my cotton considerably longer ... a few mm past the edge of the tank base ... admittedly I am using a 50/50 juice, and run much lower power than you, (+-8W through a 1Ohm, 2.5mm plain 8wrap 28G SS coil), without flooding or dry hits.