A good way to test for leaks is this, fill with water and squonk the bottle hard, while blocking the 510 connection with your thumb or a non bf atomizer.
Juice tube to the nipple
- Thread starter Rob Fisher
- Start date
A good way to test for leaks is this, fill with water and squonk the bottle hard, while blocking the 510 connection with your thumb or a non bf atomizer.
Agreed, but he is on record that he will only make videos about devices that he truly believe in and use himself.
Do you guys have a tip for the grand bottle. Mine keeps moving up slightly, resulting in the annoying bottle rattle. And I have to keep pulling it down on the feed tube. This is never a problem with my mini. Seriously pee's me off.
Replace the bottle cap - happens when the cap hole isn't small enough to tightly grip the tube (measure some out with your new fancy vernier - they differ quite a bit from bottle cap to bottle cap).
This thread title does not match the conversation.
Thanks for the hints though, I have added allot to my Reo book of knowledge.
Thanks for the hints though, I have added allot to my Reo book of knowledge.
Lol @Rob Fisher I giggled when I first read the topic of this thread!
I have never remove the juice tube from the nipple from any reo. I'm too worried to damage something by pulling it too hard.
I have never remove the juice tube from the nipple from any reo. I'm too worried to damage something by pulling it too hard.
I've been doing it that way since day 1. Thought it was how it was meant to be done. So much easier to swap out refill bottles. The little Juice that remains behind in the tube I usually blow out too. It causes the juice refill bottle to over flow if it's blocked
I also have never removed the tube, yet. The tube some how seems to be very tightly pressed on to the nipple and pulling it off every time will cause wear and cause it to not be so tightly pressed anymore.
When I change juices I have the other bottle ready- cap off and everything. I don't even need paper towels coz I hold the reo with the tube in one hand and replace bottle with the other
Eezy peezy
Sent from my iPhone using Tapatalk
When I change juices I have the other bottle ready- cap off and everything. I don't even need paper towels coz I hold the reo with the tube in one hand and replace bottle with the other
Eezy peezy
Sent from my iPhone using Tapatalk
IMO the tube can't wear out as its made out of well cured food grade silicone. It just slightly stretch over the nipple and when removed it goes back to its original shape. If however the tube material was made out of a lesser quality (and not properly heat cured after extrusion), it might get stretched out over time. Still using my original tube since March/April 2014 and no leaks with daily removal.
It's amazing that this issue has never been discussed before! Now we are all the wiser! 
Similar threads
