I didn't notice additional airflow, i did however notice additional airflow when the coil is raised 3 - 4mm from the air intake.
The Serpent Mini 22 and 25 Build Thread
- Thread starter Rob Fisher
- Start date
-
- Tags
- build mini serpent mini
I didn't notice additional airflow, i did however notice additional airflow when the coil is raised 3 - 4mm from the air intake.
I had my coil raised from the start. But with the ring on the cotton seems to be very close to airflow when you remove ring it moves a bit more naturally curved.
Sent from my SM-A700F using Tapatalk
Sent from my SM-A700F using Tapatalk
Yes even if it's my imagination... I just think it wicks a whole lot better... or it could just be in our minds... but all my 25's don't have rings anymore.
Ok it is not just hype, tried the 7 wrap ni80 24g 3mm id coil and wicked per video in first post. Thanks, very useful.
For me I found twisted kanthal and of course cotton bacon works the best on my sm22. man I love this tank
Hows It @Silver -- The build is 22g kanthal compressed at 9 Wraps. Im not sure on the diameter as i just use any screw driver laying around. but i think its 3.5mm-- build comes to 0.58.
Not really.. Im Vaping at 35 W. i think only a slight delay on a cold coil. But once its warm its perfect
- Joined
- 10/10/16
- Posts
- 113
- Awards
- 10
- Age
- 32
Super first build bud
Just a small tip. You could drop the coil down lower for the next one so that it is closer to the airflow.
But great job!
How does it vape?
- Joined
- 10/10/16
- Posts
- 113
- Awards
- 10
- Age
- 32
Super first build bud
Just a small tip. You could drop the coil down lower for the next one so that it is closer to the airflow.
But great job!
How does it vape?
Vapes good! Need a little more cloud but I'll get there.
Will keep in mind about dropping it down for next time. How much lower?
- Joined
- 10/10/16
- Posts
- 113
- Awards
- 10
- Age
- 32
No, haven't made use of Temp mode yet, Vaping at 30 Watts. What temperature would you suggest to try it on?
- Joined
- 10/10/16
- Posts
- 113
- Awards
- 10
- Age
- 32
Will snap a pic of mine tonight as its at home but this pic i found on the net is pretty much what im suggesting for coil height.
You should also find the flavour to be better when closer to the airflow.
- Joined
- 10/10/16
- Posts
- 113
- Awards
- 10
- Age
- 32
Great stuff! Will keep in mind for next time. Looking forward to seeing your build and seeing how I can correct.
- Joined
- 10/10/16
- Posts
- 113
- Awards
- 10
- Age
- 32
Congratulations @Paraddicted, that looks pretty awesome for a first build. For more cloudage you could go up to 35w - 40w and you will have more Vapor. I use dual coil Ni80 26 Gauge 7 wraps and i vape between 35w - 40w.
I am glad @Rob Fisher started this thread. I am currently still running on my previous post here.
26ga kanthal
2mm id
8 wraps
0,92ohm
25w power
What i need help with is to understand why this build is juice heavy?
Sent from my iPhone using Tapatalk
26ga kanthal
2mm id
8 wraps
0,92ohm
25w power
What i need help with is to understand why this build is juice heavy?
Sent from my iPhone using Tapatalk
- Joined
- 10/10/16
- Posts
- 113
- Awards
- 10
- Age
- 32
Thank you
will up the wattage at my next vape break and see how the serpent clouds Apologies for posting in the wrong thread.
Yeah that's kind of odd , smaller ID normally means less juice usage , but then again found the SM to be a thirsty bugger.
What wicking material are you using ? I can definitely see a difference between using normal cotton (Dischem bolletjies) vs CBV2 , went through like 4 tanks in the space of two hours last night with CBV2 3mm ID .....
I am using cbv2. When i build a bigger id it is not this thirsty.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Similar threads
