King E-pipe With Nautilus Ss Tank

I may have twisted your arm a little @Wayne....but I think it will work out in everyone's favour (those who like pipe at least)

This morning I worked out a way in which to do this:

2014-06-16 12.36.10.jpg

Yes, that is a PT2 somehow connected to the King E-pipe...

*pats self on back*

Previously the 510 connector would only allow this:
2014-06-15 10.50.21.jpg
You could not mount a PT2 or EGO threaded atomiser on there, only a 'male' 510 connector, like on a Kayfun or Nautilus.

But when you have this:

2014-06-16 12.37.10.jpg

http://eciggies.co.za/Other_Accessories/External_Thread_510_to_eGo_Adapter

Then you can pretty much use any clearo on the ePipe. Now all we need are long curvy driptips and we will be sorted

2014-06-16 12.36.34.jpg

2014-06-16 12.37.29.jpg

it is hollow inside...... hmmmm wonder what else this could be used for :D :D :D
 
Fantastic @devdev !!
Versatile adapter indeed
 
I may have twisted your arm a little @Wayne....but I think it will work out in everyone's favour (those who like pipe at least)

This morning I worked out a way in which to do this:

View attachment 6496

Yes, that is a PT2 somehow connected to the King E-pipe...

*pats self on back*

Previously the 510 connector would only allow this:
View attachment 6497
You could not mount a PT2 or EGO threaded atomiser on there, only a 'male' 510 connector, like on a Kayfun or Nautilus.

But when you have this:

View attachment 6499

http://eciggies.co.za/Other_Accessories/External_Thread_510_to_eGo_Adapter

Then you can pretty much use any clearo on the ePipe. Now all we need are long curvy driptips and we will be sorted

View attachment 6498

View attachment 6500

it is hollow inside...... hmmmm wonder what else this could be used for :D :D :D


Very nice :)

Now you just need a drip tip like this .. http://www.fasttech.com/products/1411/10008105/1718503-acrylic-colorful-round-mouth-510-drip-tip ..?? put something in the middle heat it slightly and fasion it ike you want

But she looks awsome @devdev
 
lol @ Xmas

@devdev i just measured my pipe as a reverence from were the stem comes out of the bowl to the tip is about 11cm

What is the length of the tank without the drip tip?

That pipe drip tip is just over 8cm long

Don't you think it will start being on the long side?
 
lol @ Xmas

@devdev i just measured my pipe as a reverence from were the stem comes out of the bowl to the tip is about 11cm

What is the length of the tank without the drip tip?

That pipe drip tip is just over 8cm long

Don't you think it will start being on the long side?
Absolutely, it will be getting on the long side, but I am ok with it, also should be smaller if I use the Nautilus, because that is shorter than the PT2

Here is the current size. I can hide the pipe behind my iphone 5 and you cannot see any part of it, provided the driptip is off.

2014-06-16 20.22.37.jpg
 
See what beauty lies beneath the King e-Pipe after sanding and a bit of oil to bring out the natural wood grain
 

Attachments

  • 2014-11-03 18.10.01.jpg
    2014-11-03 18.10.01.jpg
    53.5 KB · Views: 97
  • 2014-11-03 18.10.13.jpg
    2014-11-03 18.10.13.jpg
    74.7 KB · Views: 94
  • 2014-11-03 18.36.03.jpg
    2014-11-03 18.36.03.jpg
    100.5 KB · Views: 80
Was wondering why this thread is residing in the Classifieds Archive? Maybe should be moved to the e-pipe forum? @Alex?
 
Was wondering why this thread is residing in the Classifieds Archive? Maybe should be moved to the e-pipe forum? @Alex?

Thanks for that observation, it's in a new home.
 
So glad I found this thread. Been wanting to put a clearomizer on my King ePipe for like a year. Earlier this year I posted on this forum and felt like I was the only dude with an ePipe. Stoked to see there's others here now!

Trouble is, I have the mini-King ePipe (16340 battery) - any suggestions on what clearomizer would be best for something smaller than the original King epipe?

Also, now that I'm here, I'm really looking for some good pipe tobacco flavours = any suggestions? Does anyone locally make NET stuff?

So glad that there's guys here at last who are into the pipe thing. Would appreciate any suggestions big time!
 
So glad I found this thread. Been wanting to put a clearomizer on my King ePipe for like a year. Earlier this year I posted on this forum and felt like I was the only dude with an ePipe. Stoked to see there's others here now!

Trouble is, I have the mini-King ePipe (16340 battery) - any suggestions on what clearomizer would be best for something smaller than the original King epipe?

Also, now that I'm here, I'm really looking for some good pipe tobacco flavours = any suggestions? Does anyone locally make NET stuff?

So glad that there's guys here at last who are into the pipe thing. Would appreciate any suggestions big time!

I suggest you look at the PT-mini 3 - good vape flavor for its small diameter and it looks damn sexy on any pipe.

Regarding tobacco flavors, all depends on your personal preference; an excellent quality Cigar type; Alien Visions Havana Gold (locally available from http://juicyjoes.co.za) or if you prefer typical colonial French style black tobacco flavors, have a look at Vaponaute's range (locally available from http://www.vapecartel.co.za/) or if you prefer more American style medium tobacco flavors, have a look at Hurricane Vapor's range (locally available at http://www.cloudflavour.co.za/).
 
I should not have found this thread. The rose wood pipe mod will be leaving eciggies on the 14th. So far my new years resolution is off to a flying start.

next pipe is the smok
 
My King Electronic Pipe 18350 with a Nautilus SS Tank.

I love it.

View attachment 5563
Man! This is the business! Very nice. I have the Nautilus and always thought the top bit a little strange looking (like a Turkish dome or something), but it looks like it was made for this.
 
I should not have found this thread. The rose wood pipe mod will be leaving eciggies on the 14th. So far my new years resolution is off to a flying start.

next pipe is the smok
Agreed, I received the epipe v2 for xmas. I think I am developing a pipe fetish. The smok pipe is next on my list then the rose wood.
 
Last edited:
I suggest you look at the PT-mini 3 - good vape flavor for its small diameter and it looks damn sexy on any pipe.

Regarding tobacco flavors, all depends on your personal preference; an excellent quality Cigar type; Alien Visions Havana Gold (locally available from http://juicyjoes.co.za) or if you prefer typical colonial French style black tobacco flavors, have a look at Vaponaute's range (locally available from http://www.vapecartel.co.za/) or if you prefer more American style medium tobacco flavors, have a look at Hurricane Vapor's range (locally available at http://www.cloudflavour.co.za/).

Johan, thanks so much. This was very helpful. I went to a local guy, but found the PT-mini 3 didn't fit in terms of the thread. My pipe bowl has a female thread (it is 510) and I need some sort of converter that will change it to a male one, in order to fit the mini 3. We tried a couple of other clearomizers, but the others were too big. If I could get some sort of adapter, the PT-mini 3 with my pipe will look stunning!

I bought my ePipe from China and it came with cartomizers. I haven't been able to find replacement cartomizers anywhere for it, though, which is why I've been wanting to find a clearomizer. As luck would have it, Mike from Vaping101 who I went to see has the cartomizers I've been looking for! So I can use the device again, finally!

Still would like to get a clearomizer on there. Do you know if there is any sort of adapter I need?

As to the juices, going to order "Twilight Cavendish" from Hurricane Vapour - http://www.cloudflavour.co.za/product/twilight-cavendish/

"Imagine a finely cured cavendish treated tobacco, soaked in luscious honey with hints of french vanilla, aged,
then sun dried and smoked in charred oak chips, delivering a distinctly smooth and elegant flavor for the true tobacco connoisseur searching for a delicate and unique tobacco that is not overly sweet. Sit back, relax, and taste the artistry and care that has been put into this blend."

I'm imagining. And it sounds great!

Thanks man, appreciate it!
 
@AStray, the very first e-pipe I bought also needed an adapter before I could fit the PT3 mini - I can't remember from which local supplier I got it, but here's a pic below.

Regarding Twilight Cavendish, its an accurate description speak to @paulph201, the Hurricane range of tobacco flavors are excellent and can recommend all the their tobacco flavors.

ADPTR.jpg
 
Back
Top