YiHi SXmini SX Auto

Timwis

Vaping Royalty
LV
37
 
Joined
30/7/17
Posts
11,211
Awards
38
Age
53
Location
Bolton
Hi Ecigssa members, In this review i take a look at the SX Auto by YiHi SXmini. The SX Auto was supplied for the purpose of this review by David from YiHi SXmini.

http://www.yihisxmini.com/productview/209.html



Introduction

The SX Auto is the third portable device to be released incorporating the latest technology from Yihi, the ESS(Electronic Spray System) Driver integrated with the latest third generation temperature control technology.
Don't shoot me if i'm wrong but as far as i can work out both iPV (Pioneer4You) who brought us the first portable device using the technology and VSticking are owned by Yihi SXmini so while SXmini concentrates on high end products we have iPV bringing us more affordable products while the aim of VSticking is to offer luxury but at an affordable price. I made no secret of the fact i love this new technology when i first reviewed the iPV version and was quite blown away when VSticking then brought us a version with a more functional TC DIY mode along with Rebuildable ADA's.

The SX Auto was supposed to be released early August and i have been expecting my sample since the end of July but due to YiHi SXMini wanting the device to be as perfect as possible constant updates before release has caused a 5 month delay, in fact their was yet another firmware update since it was sent. The SX Auto offers 3 rather than 2 preset modes for each type of ADA in Auto mode and a more in depth menu system in both Auto Mode and especially in DIY mode than was offered previously, add to this the high end build quality that i can only describe as outstanding and the SX Mini SX Auto is definitely worth a look!

___________________________________________________________________



In The Box



Contents:

1 SX Auto Device
1 0.2ohm SX-ADA Atomizer
1 0.8ohm SX-ADA Atomizer
Silicone cover on each ADA
1 Micro-USB Cable
Manual
Warranty Card



___________________________________________________________________



What You Get And What's Available?

Looking at the back of the boxes that the ADA's come in (2 per box) there are 3 different ADA's available a 0.2ohm Ni and a 0.8ohm SS316 both of which are included and also a 0.6ohm ADA which i assume will also be SS316 that needs to be purchased separately. You don't receive the rebuildable SX-RSA Esea which again is available separately. Extra 3.5ml e-liquid tanks can also be bought separately again with 2 in each box.



___________________________________________________________________



Aesthetics and Ergonomics

The SX Auto came in the usual White cardboard packaging familiar with SXmini products and i was lucky enough to receive a number of different versions. The options are Antique Bronze, Antique Copper, Carbon Black, Carbon Gun Metal and Elegant Black, all versions look very classy.

The Zinc Alloy constructed device has both a high end feel and look to it and even on close study is immaculate. For a small device it has some weight to it but is still very portable and ergonomic in fact it feels quite luxurious in the hand. It has a C type frame with a top cut corner and cylindrical spine.

The large protruding fire button has a top cut corner to match the device and towards the bottom of the face of the device we have 2 diagonal pill shaped protruding navigational buttons. Between the fire and navigational buttons we have the screen, the buttons are also zinc alloy that give a stiff satisfying click and we have no rattle or movement whatsoever. Towards the bottom of the cylindrical spine we have the e-liquid tank that can be pulled downwards then moving to the base we can also see the bottom of the e-liquid tank, safety stamps and the USB port, which i wish was anywhere on the device other than the base.



___________________________________________________________________



SX Auto Specs and Features:

Powered by the YiHi SX685J processor
Battery capacity: 1400mAh
Reservoir capacity: 3.5ML
Reservoir material: PETG
Temperature range: F' 356° - 446°
C' 180° - 230°
Max Charge: 5V/1A
Quiescent Current <1 μA
E-liquid pump speed: 15-80
Device size: 81.8*48*20.3mm
Colours available: Antique Bronze, Antique Copper, Carbon Black, Carbon Gun Metal, Elegant Black



___________________________________________________________________



How The System Works

The SX Auto is a temperature control and bottom feeder device. The YiHi chip also controls the supply of e-liquid to the atomizer by pumping just enough e-liquid as you vape so when you press the fire button it heats the coil while simultaneously spraying the atomizer's build with e-liquid via the electronic pumping system, the system is called ESS (Electronic Spray System) Driver. The idea is that the e-liquid is completely isolated from the heating core apart from when you actually vape so you are always vaporising fresh e-liquid, so giving improved flavour.

Although it's a temperature control device it's a proprietary system although unlike the iPV V3-Mini it does have a DIY mode which offers much more TC functionality. In Auto mode the settings have been tailored to suit the available ADA's and is very user friendly so those that only normally vape using power mode will have no issues using the device as it's very simple to use.

___________________________________________________________________



The SX ADA's

The SX ADA's look just like little 16mm RDA's and work the same way just are not rebuildable so once you are not getting satisfactory flavour you need to replace it with a new one. The all in one top-cap and mouth section can be turned to adjust airflow and of course it has a BF pin fitted but like with the ELF and SMA ADA's that came with the iPV V3-Mini and VKSma it's not standard 510 threading but proprietary. The threading is much shorter but wider than the usual 510 threading and the connector on top of the device is shallow and has a fixed BF pin, the real bummer here is despite being proprietary like with the iPV V3-Mini and VKSma they have managed to have it a slightly different size so the ADA's from each device are not compatible with each other.

Also available is a rebuildable ADA which is called the SX-RSA Esea which is very similar to the rebuildable ADA that is available for the VKSma. Although for those not into rebuildables will find the iPV version a really good device having a rebuildable ADA and DIY mode takes both the VKSma and SX Auto to the next level.



___________________________________________________________________



The E-Liquid Tank

The e-liquid tank holds 3.5ml of e-liquid and towards the top there is an indented section to get your finger into for grip, just pull down and it slides out of the device. Looking at the device their is a pipe that feeds all the way down to the bottom, when fitting the tank just feed the pipe into the main hole at the top of the tank and slide back into position, it fits perfectly. Looking at the top of the tank we have a hole which is used for both filling and feeding the pipe into as already described. We also have a second minute hole which allows air to escape or suck air in depending on the requirement, make sure you leave enough volume for the pipe when filling. I found filling and both removing and refitting the tank quick, easy and a 100% mess free experience.



___________________________________________________________________




The Display

The display is very simple but sharp and very bright, all the pictures included does show the display to be blurred but it's simply the case that it's too bright for my camera. To the left we have the battery status bar then centre we have the temperature either in Celsius or Fahrenheit depending what unit you have set. Finally we have the wattage boost setting which will be either P1, P2 or P3 depending which you have selected. The display when in DIY mode is very similar but displays the settings you have made including Joules.



___________________________________________________________________



Navigating And Operating SX Auto

The device is turned on by 5 clicks of the fire button but turning off needs to be done within the menu system, once on 3 clicks of the fire button locks the device, this locks the entire device and it will not fire, to unlock it's again 3 clicks of the fire button.

The device is very easy to use once you have used it for a while but is a device that to get to grips with quickly needs the manual handy and i feel the device could with the addition of a select button be much easier to navigate from the off.

With the device on clicking the fire button 5 times changes the display to have your preset highlighted along with the temperature and you can cycle between P1, P2 or P3, another press of the fire button allows the temperature to be set. A further press of the fire button highlights exit but a further press allows you to select the menu which first brings up temperature unit. When the temperature unit is displayed a further press of the fire button gives you the option of shutting the device down and finally it goes to Update for when you want to update the firmware.

When on the normal operating screen single pressing up or down alters by one unit the speed of the electronic pump, 15 being the lowest and 80 being the highest. If you find the vape is cutting out due to their not being enough e-liquid being delivered just increase the pumps speed. you can also hold down the up button to pump e-liquid to the atomizer without vaping. If you find the pumps setting is too high causing the deck to flood or giving spit back you can initially hold the down button which will suck the access liquid back into the tank before lowering the speed of the pump to a suitable speed. That's it! Just vape and the e-liquid will automatically be pumped to the atomizer at the same time.



The Presets Represent:

Ni wire 0.2ohm ADA:

P1 = 15-20W
P2 = 25-30W
P3 = 30-35W

SS316 Wire 0.8ohm ADA:

P1 = 10.5-12W
P2 = 12.5-13.5W
P3 = 14-16W

The variations in wattage is because it's not a constant output device so the power will decrease (i barely noticed) as the voltage of the battery drops.



___________________________________________________________________



DIY Mode

The SX Auto offers DIY mode to use with the rebuildable SX-RSA which to enter you need to press both navigational buttons together. When you first enter DIY mode it briefly shows the software version number before going to the working screen which displays the battery status bar to the left, joules central and wire type to the right.

When in DIY mode Pressing the fire button 5 times changes the screen to have joules highlighted left and the temperature to the right. The joules can be altered or another press of the fire button highlights temperature. The menu works the same as when in Auto mode but added to the menu is choosing wire type or TCR, an option to go back to Auto Mode and setting resistance which needs to be done for a new RSA build to work.

The DIY Mode really isn't ideal for beginners as it's a bit complicated and if you are not familiar with temp control my only advice would be not be afraid of it and although they are not the same treating Joules as Wattage will uncomplicate things and be a good starting point.



___________________________________________________________________



My Experience Using The SX Auto

To start with a bit of background as when i first heard about the ESS Driver technology i read up about it and was immediately intrigued. Also this is the third device i have reviewed using the technology and i have enjoyed using all 3 devices.

The SX Auto works exactly the same as the previous 2 devices although the pump is quieter than on the VKSma. The only alterations made to this device are all pro's which are an added preset for each ADA and much more extensive menu system especially using the DIY mode.

Being usually an RTA user of course i loved using the device in DIY mode with the rebuildable SX-RSA but even both ADA's gave RDA quality flavour and the way the system works the longevity of the ADA's are different league compared to other disposable products like stock coils and disposable tanks.

Although the Ni 0.2ohm is best for DL and the 0.8ohm SS ADA for MTL with the adjustable airflow either can be used with both styles although if using the SS ADA with airflow fully open it does become a cool vape.

Although the e-liquid tank holds just 3.5ml of liquid i have been finding due to the way the system micro manages the e-liquid supply it's outlasting a 7ml bottle on a standard bottom feed device. Finally the battery life is very good, because i have used the device for a few hours per day for the past 3 weeks rather than whole days it's difficult to be exact about battery life but i would say most vapers will find it lasting all day with the 0.8ohm ADA although with the 0.2ohm ADA (which i preferred) it will probably need one charge during the day, with the RSA it will depend on the build.

The only cons for me is the lack of compatibility between the ADA's for the three available ESS Driver portable devices, the fact the menu system does take some time to get to grips with and the USB port is not Type C.

The device took 1 hour 45 minutes to charge and i would of liked that to be nearer 1 hour but it does support pass-through although the USB port is on the base which i also don't like, finally the device is firmware upgradeable.



___________________________________________________________________



Conclusion

For me how good is a device is mostly down to how much you enjoy using it so it will be different for everyone. As i started testing the SX Auto late December i can quite honestly say it's the best device i used in 2019!


Likes

Outstanding build quality
Aesthetically pleasing
Many classy colour/design options
Portable
Innovation
ESS (Electronic Spray System) Driver
Integrated YiHi Chipset
Easy to use temperature controlled device (Auto Mode)
3 Wattage presets
E-liquid isolated from heating core until you vape
Can manually pump e-liquid to atomizer or suck back into tank if needed
MTL or Restricted DL
Device lock
Device can be turned off and on
Clean leak resistant BF set-up
3.5ml tank of e-liquid goes a long way due to micro management system
Removing, Filling and reinstalling tank very quick, easy and mess free
Adjustable airflow
RDA flavour
ADA's give very good longevity
Rebuildable RSA can be purchased separately
RSA easy to build and performs well (restricted DL or loose MTL)
DIY Mode
Very good battery life (1400mAh)
Supports pass-through
Firmware upgradeable


Cons

Slight drop off in power towards end of battery life (barely noticeable)
Takes 1 hour 45 minutes to charge (could be quicker)
USB on base of device and not type C
DIY mode not ideal for beginners (a bit complicated setting up)
ADA's not compatible with other ESS Driver devices



I would once again like to thank David from YiHi SXmini for supplying the SX Auto for the purpose of this review.

http://www.yihisxmini.com/productview/209.html

___________________________________________________________________
 
Great review @Timwis . I like this podmod especially being a bottom feed device.
At first glance it looked a bit odd and big for a pod system, but with all the features you can understand why.
The pics towards the end of the review does it justice and you can see the SX in it.
 
Great review @Timwis . I like this podmod especially being a bottom feed device.
At first glance it looked a bit odd and big for a pod system, but with all the features you can understand why.
The pics towards the end of the review does it justice and you can see the SX in it.
I also got the X-Class which is the full size version with the ESS Driver technology, that got mixed reviews when it was originally released about 9 months ago but at the same time (over 5 months) they have been updating the Auto they have been improving the X-class and that now is also a winner!
 
Did you have a bad experience with them?
If you look at his listed mods all is revealed so if i was him i would feel the same obviously but i would imagine every manufacturer would have had a customer unfortunately with that experience it just happened to be a YiHi device he had a bad experience with.
 
If you look at his listed mods all is revealed so if i was him i would feel the same obviously but i would imagine every manufacturer would have had a customer unfortunately with that experience it just happened to be a YiHi device he had a bad experience with.

After researching, it was an issue with a number of SX mods. I could understand a mid-range mod brand but not something as premium as SX.
 
After researching, it was an issue with a number of SX mods. I could understand a mid-range mod brand but not something as premium as SX.

I feel your pain. I had two Wismec's autofire and fail. It didn't explode though,but it was the the mod that worked for me and up until today I'm still thinking of getting another luxotic,but I am hesitant,yet I still like that mod.
And I still also like Wismec mods.
Maybe that was just that series or maybe just something with that design.
I could be wrong so I'm not telling you how to feel about them. I would have felt the same if it exploded on me.
 
Back
Top