If this is a clone

Stranger

Vaping Addict
LV
26
 
Joined
24/6/19
Posts
4,079
Awards
31
Location
Gauteng South Africa
how good must the original be ?

At the weekend I picked up a Dvarw DL clone from @adriaanh. Big vouch for the dude, you can buy from him with confidence.

Now Mr Rob Fisher has literally a truck load of these things and even defined a manner of wicking them that makes him a legend. So the curiosity was tweaked and when it came up for sale I was in like Flynn.

I spent a bit of very enjoyable time on you tube looking at reviews, including those by @Rob Fisher, and one thing jumped out at me every time. Coil choice and how some were difficult to do due to the screws. I know the FL (face lift) models have addressed this, but I have a version 2 clone so I knew that it may be a struggle to put fancy coils.

This is what I did20200713_101700.jpg
I took some DIY 24 awg twisted, made the legs a little longer and eyeballed where the bends should go. I then pre bent the legs to hook around the posts. This help with the tension and positioning. 6.5 wraps, aimed for .5 got .46 Ohms
Wicking is easy enough and I went with the dam method.
20200713_101828.jpg 20200713_102044.jpg

Ready to go
20200713_102147.jpg

So is it everything the hype said it would be.
No, it is not.
i was expecting something out of this world, maybe the expectations have been built too high or because it is a clone, or I have cocked it up, but I would put this from a flavour point of view on par with the Vapeflymesh RDTA.

Don't get me wrong it is good, the flavour is banging. I love the big tank. I am not even sure which insert is in but the airflow is just right for me. Is it a keeper, hell yeah it's great and I prefer it over an RDA.
Maybe just maybe I have gotten to a point where I am almost there with what my expectations are. Perhaps with my other gear I have gotten to that point where it is now just about fine tuning. I don't know. Maybe the the machine that drives the hype has just been very very good.
It is great looking, it does not leak. Flavour is really good and there is room for adjustments going forward. Easy enough to build on but restricted with coil choice. Add ons available.

So all in all a great tank, even though it is a clone. Would I pay a couple of grand for an original ?

Would you ?
 
Interesting read as I have contemplated getting a clone one as well to test drive before I shell out a few thousand for an original.
 
I have learned the hard and expensive way to NOT pay attention to hype. No matter who starts or encourages it. I have saved thousands since then.
 
It's all subjective I suppose and I am glad that I bought this tank. Bear in mind this was the first build on it and I am happy that I got the result. I read about people trying mesh and getting no flavour or joy. I tried mesh and it is just not for me.
I am hoping that people that do have these will jump in on the thread and express their opinions and tips and tricks.

Really would like a glass tank to go with this, would love to be able to use my ADV menthol mint, but very scared of the tank material.
 
Just my two cents here, what I have realized is that any atomizer or tank I try (ok so thats very few, but aforementioned vapefly is one of them) is that they are all of a muchness, and some have a little better flavour out of the box than others, but until I put in violence coils, flavor is just not up to standard. In anything at all. now Im a tank chaser, and my next and probably last big vape buy maybe next year is something with the biggest damn tank I can find haha :) (preferably with stainless steel wire wicking) :D So guess what Im saying is if it has adjustable airflow if I add the right coil its all great. I can see no huge difference between atomizers, just between coils!
 
I have used a clone DL Dvarw for a long time. If you have a decent clone (SXK, Coppervape, YFTK) then I strongly doubt that the vape experience on the original will be any different. I have tried both.

If you are comparing the Dvarw to a mesh RDTA then I am not surprised that you were underwhelmed by the flavour. You are not comparing apples to apples. The Dvarw is single coiled RTA with a resistance of around 0.5 Ohm. Most mesh RDTAs run at lower Ohms and higher Watts. The surface area of the "coil" is massive.

If you compare the Dvraw to other single coil RTAs then it is without doubt one of the best.

Whether you would spend thousands on the original brings us to the clone/authentic debate which has proven to be divisive and unpleasant on the forum. It's just not worth going there. These discussions took place before you joined the forum. If you like you could always search for it but IMO it will provide you with no useful answers.

You may also find that different coils, placement and wicking will improve your experience on the Dvarw clone.

I recently rebuilt an old mesh RDA that I had never been happy with. I used the same mesh as before but found that I had amazing flavour from it. I must have got the coil length and wicking just right. I loved it. After a week of use I decided to rewick it. Like a fool I replaced the mesh at the same time. Crap flavour and even dry hits. I tried rewicking several times but couldn't reproduce the experience.

Vaping is a very strange hobby.
 
I could not get on with the mesh in the Vapefly. I got loads of flavour but two things put me off. One, very low Ohms on the supplied mesh. 0.14. I was not really happy seeing as I do use mechs. Two, flavour was great but the mouth feel was .... weird.
So as far as the comparison goes, I have been using the same wire in the Vapefly. Of course coil placement and resistance is a bit different but overall I am getting a very good vape on essentially a budget RDTA. Also built as a single coil.

I agree, don't want to get into a clone war.

Here is the thing and maybe I am not being adjective enough. I get a great vape from the Dvarw, but it is just as good from the Vapefly. Not underwhelming at all and maybe the post was about an expectation from a very hyped piece of kit. I am not knocking it, am happy to have it and will certainly use and enjoy it.
Secondly, and again I do not know how to put this, maybe I am reaching some sort of peak whereby I am not going to get much of a better experience off .... anything. I came to DTL after years of MTL and high nicotine dependency. I have found that I much prefer DTL and the nic dependency is much lower than it used to be. Of course you have to find that sweet spot. Maybe I have.
 
Each to their own, i have both high end original and cloned products of high end products and to be honest i don't have sympathy for their products being cloned at £150 for an atty the high end manufacturers have one thing in mind, making money. Their small production runs to keep demand higher than supply keeps prices artificially high so they don't care about the vaper so i couldn't give a flying about them, so many atty's at $149.99 in any other industry they would be investigating for price fixing! The only thing i am strongly against is when a clone is sold as authentic whether that's by a vendor or individual, that is disgusting!

The Eamon Lee Arietta cost me yes you guessed it $149.99 and is the worst pile of crap i have ever used, i should of got the £10 clone to find out first instead of wasting so much money, mind in my experience the clone would probably have been better.

I'm not against high end at all and if to the individual they are worth it then that's great and like i said i do buy high end sometimes (and sometimes am very disappointed) but i am against those that criticise those that get clones, especially as these high end manufacturers are just taking advantage of what a lot of us have to varying degrees, vaping snobbery! so drastically charging more than the true product worth "GREED"

My best atty that is high end and i love is The Atmizoo Tripod, it's fantastic but is it really worth the $149.99 i paid for it, is it f**k!!!
 
I bought the clone Dvarw DL to test it then shortly after I bought 2 authentic ones and I honestly won’t be able to say which is which, to the extent that I marked them with specific drip tips in order to distinguish them. I don’t have time nor patience to look at the fine details and take measurements but what I know is that they look and feel exactly the same. My experience with the DL model pushed me to buy the MTL clone and the build quality and satisfaction I got from it convinced me to spare money this time around and not buy an authentic.
P.S you can’t simply replace the tank with a glass section but you have to buy the whole tank section as the glass wouldn’t fit on the original metal frame.
 
It all comes down to finding your happy place. One RTA wont give a 2nd vaper the same experience.
I despise the Zeus range, Revolver i used 3 times, serpent a week, and are currently somewhere in the cupboard.
For me Gear RTA is perfect, but ive spoken to a lot of people that dont like it, and thats cool. It works for me and i love it
Whatever gives you a semi, go for it
 
On some occasions I hav found the clone to be very close. A clone hadaly is a power little rda. Not far off the OG. But the best example of a clone not living up to the OG was the dvarw for me. The clone was rubbish and leaked everywhere. Orings terrible flavour average. I then picked up the OG and it was phenomenal. I couldn’t believe the difference. So testing the clone to see if u will enjoy the OG doesn’t always work our coz they can be worlds apart and the clone can put u off the brilliance of the original. Jus my small input
 
On some occasions I hav found the clone to be very close. A clone hadaly is a power little rda. Not far off the OG. But the best example of a clone not living up to the OG was the dvarw for me. The clone was rubbish and leaked everywhere. Orings terrible flavour average. I then picked up the OG and it was phenomenal. I couldn’t believe the difference. So testing the clone to see if u will enjoy the OG doesn’t always work our coz they can be worlds apart and the clone can put u off the brilliance of the original. Jus my small input
I have never even looked into getting a Dvarw clone but if it's like any other hyped high end atty it would be cloned by several cloners so even homework needs doing when buying a clone, i bet there will be at least one Dvarw Clone out there that if it got mixed up with the original and they were both given to you to use you would struggle to tell which was which. I did start a thread a while ago which was something like "Clones - The Good, Bad & Ugly" which purpose was to discuss which clones performed as well as the originals and which were garbage but what was supposed to be a thread to educate us all pooling everyone's experiences of different clones just ended up turning into a Clone war!
 
Last edited:
It all comes down to finding your happy place. One RTA wont give a 2nd vaper the same experience.
I despise the Zeus range, Revolver i used 3 times, serpent a week, and are currently somewhere in the cupboard.
For me Gear RTA is perfect, but ive spoken to a lot of people that dont like it, and thats cool. It works for me and i love it
Whatever gives you a semi, go for it
So what i have learned today is my vaping satisfaction outweighs that of @SmokeyJoe's, while his enjoyment of the Gear gives him a semi, i have many an atty which leaves me stiff as a rod!!!!:jaja-no:
 
So what i have learned today is my vaping satisfaction outweighs that of @SmokeyJoe's, while his enjoyment of the Gear gives him a semi, i have many an atty which leaves me stiff as a rod!!!!:jaja-no:
Or is that the Blue pills my wife keeps ordering me! :facepalm:
 
This explains a lot. Let me try and help.

YOU ARE STILL IN THE MATRIX
If you are willing to wait for the lockdown to end, you can buy the new SXK Dvarw FL clone on Fasttech for the price of the glass section... and it comes with glass as standard... Just in terms of the tank on the clone, I vaped everything from Red Pill, Cube (a lemon sherbet), Iced mangos, tobaccos etc in my clone and the tank never even changed colour.
 
Thank you very much for the heads up. Certainly looks like an option.

ivc_mixer also gave me some invaluable information re tank cracking juices and how to identify them. I may get away with my ADV after all, that will make me happy as I do like this tank.
 
SXK Dvarw FL clone on Fasttech
How are placed like Fasttech and 3FVape? I saw a mod on there I really want, not to use as such but more for my collection, but do not want to spend money now and have it be like Wish where I might not see the item. Would also consider adding this tank for interest sake.
 
How are placed like Fasttech and 3FVape? I saw a mod on there I really want, not to use as such but more for my collection, but do not want to spend money now and have it be like Wish where I might not see the item. Would also consider adding this tank for interest sake.
Unless you want to add $50 for shipping VIA DHL, don’t go anywhere near Fasttech until the lockdown and tobacco ban are lifted. The think there are quite a few people who are keen, so maybe we can do a group buy when things run more smoothly. That way we can do a fast DHL and all split the shipping. I might just fall for an Odin 200, the Odin 100 that was announced today and an Aromamizer Plus V2 (and a wheelbarrow full of coilology coils).
 
Back
Top