Was not a good Saturday.
About 3am the morning I walk outside for a wee and notice the Nikola's screen is on where it is standing on the table outside. So thinking a burgler vaped a bit on it, I first scanned the garden, I am long waiting for an easy fight. But unfortunately did not find any unwanted guests. So back to Nikola, the screen is on but do not fire. Take batteries out and go to bed. Later put batteries in but it does not come on. I did not have any juice spillage or noticed any leaks, but just in case I leave it in sun a few hours. Put batteries in and it works, but sometimes the wattage just start runing on its own and dont stop. So something wrong inside, I think at the watts up and down buttons. I personally think its one of these small ants that I have alot off outside, that maybe crawled inside. Will leave it another day or two before I open.
Then last night after Im back from Loftus, I drop my trusty companion the Rsq. And I mean drop from about 2m down stairs, everything everywhere. Put together again and it work. It was such a big fall, something bended, cant see anything, but tje battery door needs to be pushed hard to get in all the way and then pulled hard again to get it off. Not a big problem, it is actually very secured the way it is now.
But here is the problem and it confuse my logic.
So vaping a bit last night Im getting this burnt cotton taste. So this morning change the cotton. Still the same. I always build at about 0.9ohm on the Vapefly and about 16watts. If you put the device on bypass mode it runs at +-16watts always. I always first put in bypass mode to have an idea of where the watts should be if I have a coil that I dont know the required watts for the ohms. And on bigger ohm builds a few watts can make a big difference
Anyway as I was still confused as to what can give me this burnt cotton taste, I put it in bypass and suddenly now its running at 12watts? But for more than a month all the +-0.9ohm builds was at 16watts. So now in normal mode at 12watts the vape is perfect again. But Im totally confused, my logic cant explain how a fall can change the output required?
Àny ideas?
About 3am the morning I walk outside for a wee and notice the Nikola's screen is on where it is standing on the table outside. So thinking a burgler vaped a bit on it, I first scanned the garden, I am long waiting for an easy fight. But unfortunately did not find any unwanted guests. So back to Nikola, the screen is on but do not fire. Take batteries out and go to bed. Later put batteries in but it does not come on. I did not have any juice spillage or noticed any leaks, but just in case I leave it in sun a few hours. Put batteries in and it works, but sometimes the wattage just start runing on its own and dont stop. So something wrong inside, I think at the watts up and down buttons. I personally think its one of these small ants that I have alot off outside, that maybe crawled inside. Will leave it another day or two before I open.
Then last night after Im back from Loftus, I drop my trusty companion the Rsq. And I mean drop from about 2m down stairs, everything everywhere. Put together again and it work. It was such a big fall, something bended, cant see anything, but tje battery door needs to be pushed hard to get in all the way and then pulled hard again to get it off. Not a big problem, it is actually very secured the way it is now.
But here is the problem and it confuse my logic.
So vaping a bit last night Im getting this burnt cotton taste. So this morning change the cotton. Still the same. I always build at about 0.9ohm on the Vapefly and about 16watts. If you put the device on bypass mode it runs at +-16watts always. I always first put in bypass mode to have an idea of where the watts should be if I have a coil that I dont know the required watts for the ohms. And on bigger ohm builds a few watts can make a big difference
Anyway as I was still confused as to what can give me this burnt cotton taste, I put it in bypass and suddenly now its running at 12watts? But for more than a month all the +-0.9ohm builds was at 16watts. So now in normal mode at 12watts the vape is perfect again. But Im totally confused, my logic cant explain how a fall can change the output required?
Àny ideas?
