Help needed with premixed base

[CyberJoe]

I am running out of juice, so need to mix some again.

This is all I have to work with:

Nicotine (Prime-Nic) / PG 36mg - 100ml
Pre-Mixed Base (70VG/ 30PG) 1 Litre
Cherry Blast Concentrate (FW)

If I ignore the PG/VG mix, will this work (based on a 18mg strength result)

PG Nicotine Base - 50ml
Cherry Blast FW - 20ml
Premix Base - 30ml

 

[alex1501]

I am running out of juice, so need to mix some again.

This is all I have to work with:

Nicotine (Prime-Nic) / PG 36mg - 100ml
Pre-Mixed Base (70VG/ 30PG) 1 Litre
Cherry Blast Concentrate (FW)

If I ignore the PG/VG mix, will this work (based on a 18mg strength result)

PG Nicotine Base - 50ml
Cherry Blast FW - 20ml
Premix Base - 30ml

If you are going for 18mg 79PG : 21VG, it will.
I don't have Cherry Blast. but some use it @ 20% ( https://e-liquid-recipes.com/flavor/10478 ).

 

[Resistance]

@Room Fogger
@alex1501
@Andre
@Alex
@RenaldoRheeder
And other MTL Mixmasters

 

[Resistance]

If you are going for 18mg 79PG : 21VG, it will.
I don't have Cherry Blast. but some use it @ 20% ( https://e-liquid-recipes.com/flavor/10478 ).

You beat me to it!

 

[alex1501]

You beat me to it!

There is the first time for everything.

 

[Lightbringer]

I am running out of juice, so need to mix some again.

This is all I have to work with:

Nicotine (Prime-Nic) / PG 36mg - 100ml
Pre-Mixed Base (70VG/ 30PG) 1 Litre
Cherry Blast Concentrate (FW)

If I ignore the PG/VG mix, will this work (based on a 18mg strength result)

PG Nicotine Base - 50ml
Cherry Blast FW - 20ml
Premix Base - 30ml

The PG/VG ratio is more about what you are going to use the liquid in. Anything MTL will generally use a 50/50 liquid due to the device not heating up as much as a DL sub-ohm tank.

So a device that uses less wattage can't heat enough for thicker liquids. A sub-ohm device is used at higher levels.

I'm assuming if you are going with 18mg nic that it is going to be a MTL device though. So you may have coil issues going that high with the VG.

 

[Resistance]

The PG/VG ratio is more about what you are going to use the liquid in. Anything MTL will generally use a 50/50 liquid due to the device not heating up as much as a DL sub-ohm tank.

So a device that uses less wattage can't heat enough for thicker liquids. A sub-ohm device is used at higher levels.

I'm assuming if you are going with 18mg nic that it is going to be a MTL device though. So you may have coil issues going that high with the VG.

Not necessarily, I use 90+%VG in both applications.

 

[CyberJoe]

Thanks all, sorry I should have added it is for MTL, primary device Smok Nord2, standby device Savour MTL.

I might have a small bit of PG and VG left somewhere, but probably only about 100ml, if I find that I will use that first.