#REVIEW# Geek Vape Eagle RTA

[Mark121m]

Good morning all
I won a competition 1 week back receiving a 2nd place prize of 2 HBC sets Juggernaut and Tiger
Amazed at getting 2 decks in 1 container

Here is my review on them

so here is my view of these HBC (Hand Built Coils) coils from geekvape.
since i dont own a Eagle tank im going to talk about the RBA deck that i won Woooohooooo 2nd place thank you @HeavenGifts which supplied these to me for the purpose of this review.

The Entire RBA can be very easily taken apart.

So im going to check the rubber bottom piece made of Silicone at the bottom,
seems really firm and in place it seems solid.

Removed the Wick seems to be a nice thick Jap Cotton, not sure on quality because i cant really test it.

next
Checking Wire (wow geek vape has done a great job with these H.B.Coils really nice
loving the Geekvape quality on these coils BIIIIIIIG FAN.
Internal Diameter 3mmID

Airhole is very close to the Tiger wire coil so gotta watch out to not touch the ceramic Base.
ive hear ceramic is great for Flavour improves the flav quite abit. ive had my share of RTAs with Cermaic bases there is a difference.

to rewick im going to use Std cotton from the store which ive been using for the last 2 months great Cotton.
Easy to fit,
So there isnt instructions to rewick these RBA's so ive cut roughly just mid point of the RBA deck using a Needle pin pushed the cotton into those juice "slots or Grooves"

WELL yea there it is, amazing quality
from the RBA to gold screw to the silicone bottom piece.
i would recomend changing the Grub Screws on this.
after a few tighten and lossening of the coils it show alot of wear.
Black 3mm Grubs screw (12.9g) never break again.

Thread on the RBA is really fine.
wouldnt wanna strip this inside the RT(B)A base of the attomizer.

So yea Vape Family.
in terms of Coils and Rebuilding or even swopping out of RBA bases this is a insane atomizer from Geek vape.

Supplier :
@HeavenGifts


Sent from my SM-G800F using Tapatalk

 

[Mark121m]

Update @HeavenGifts

Quick Look
My single deck was wrapped with a Twist n not flat all round.
Cotton was to thick leaked juice about a Tank. Not happy.

Threading of the tank very fine and gotta watch how you screw the glass back onto the Base.

0.2ohm coil come in at 0.25ohm
Vaping it at 64watt . 4.05v
All juice ports open.
Making some nice cloud.
Seems to be a good trick tank.

Great airflow from the base and top inlet.

25mm D Tank
Sitting Flush n clean on my IPV5.
you don't feel the weight on the ipv5 as I did on the Ijust battery.
Tank is heavy but ipv5 is heavier.
So feels good in the Hand.

Mouth piece is large.
Would have liked a few more spare and tools for when you need to unscrew the coils at a later stage

Awwww yea.
So far so good

Sent from my SM-G800F using Tapatalk

 

[Mark121m]

Feeling much better on the IPV5 device

Sent from my SM-G800F using Tapatalk

 

[Mark121m]

Good day All. Here with a Update @Heaven Gifts

Ive really enjoyed the past week with the Eagle tank and HBC-SO3
Single Deck has been a great experience
used the setup at 40watt then at 64watts as max.
Juice ports do not need to be Closed when filling the Tank.
i did experience a slight juice leak but after laying the device on its side showed no signs of leaking thereafter.

Single Coil has been a great flavor and cloud maker.
when set to 40watt had no issues with cloud. Flavor is impeccable. 7/10
with this test i used my lowest Concentrate juices to test the Flavor capability that from a RDA which i use constantly.
when setting the device to 64watt vapor production is insane for this single coil deck. flavor was compromised for this high wattage.
@Heaven Gifts

Inspected the Deck after a week of vaping . not a problem in sight
silicone bottoms and the top base have not shown any signs heat deterioration.
Coils looks great slight crusting but nothing a clean under and a light brush wont fix.

Then on to testing the HBC - D04
Dual Fused Clapton build from GeekVape #Heavengifts #Geekvape #EagleRTA #Eagle #HBC.
After i swopped out the S03 for D04 HBCcoil. vaped on it for a few moments noticed no change in flavor almost at a point felt i was going to dry hit. unscrewed the tank from the base to find the cotton was saturated with no problems. This is were i decided to open up the wick and check for myself.
noticed there was just way to much cotton for my liking and Snipped about 5mm from the ends on both sides. repacked the decks juice ports. proceeded to screw the tank back onto the Base.
Set the device to 64watts for the test
I Can confirm that within 2 pulls, BAaaaaam there was flavor and a large amount of it. really loving the deck swop out ability of this tank.
yes you need to have your cotton and scissor handy,but once this is sorted not a problem there after.
been a few hours now and picked up the wattage to 82.5watts and i can say wow.

on to another week of vaping.
Peace out Vape Family
have a wicked weekend ahead

Kind Regards
#Mark121m

Supplier:
@Heaven Gifts