Hi Ecigssa members, In this review i take a look at the Falcons Starter Kit with Pod One Atomizer from Teslacigs. The Tesla Falcons Starter Kit with Pod One Atomizer was sent for the purpose of this review by Cortana from the Healthcabin.
https://www.healthcabin.net/tesla-falcon...18695.html
Introduction
The Falcons by Teslacigs is available in 3 different kit forms, paired with the Resin sub-ohm tank, paired with the disposable One Tank and this version i am having a look at paired with the Pod One which is a Pod Tank Hybrid. The Falcons mod is a lightweight simple direct output device with built-in 2000mAh battery and the Pod One has an installed 1.2ohm coil and gives an authentic MTL draw, very similar to taking a draw from a cigarette!
___________________________________________________________________
In the Box
Contents:
1 x Falcons MOD 2000mAh
1 x Pod One Cartridge（1.2ohm Coil Pre-installed）
1 x Pod One Adaptor
1 x Accessory Bag
1 x USB Cable
2 x User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Falcons Pod One Kit came in Teslacig's new style cardboard packaging with sleeve which has cutouts. On opening the packaging in the top tray we had a colourful Falcons mod, pod and atomizer base as a complete unit and a spare pod section. I received the Orange Green version which is Orange at the top, Green at the bottom and around the middle both colours fused together, the included pods are Orange. The other versions are Blue Red, Purple Yellow, Black, Red, and White, the Black, Red and White versions are speckled and all come with pods that match. The device itself is plastic with rubber coating and extremely lightweight, they are the same material and finish as the popular WYE so if you like the look and feel of the WYE then you will like the Falcons both aesthetically and feel in the hand. The device is quite small almost like a very short pen style just boxed out a bit to give it a box mod look. Top, bottom and front of the device is Black (sides and spine are colour of choice), on the base we have safety stamps cut into the finish and venting. The front of the device has a shield shape fire button at the top which has raised logo and rim, at the bottom is the micro USB port then between the fire button and the USB port we have a long vertical LED strip. On both sides of the deice we have raised plaques, one has "FALCONS" cut into it, the other "TESLACIGS", moving to the spine we have some textured design for grip. Up top we have a slightly raised 510 plate (raised just enough to protect the device without causing noticeable gaping) with Gold plated, spring loaded 510. The device is of good quality for a device made of cheaper materials and ergonomically very good.
___________________________________________________________________
Pod One Atomizer Specs and Features:
Dimension: 22 x 38mm
Material: Stainless Steel+PC
Capacity: 2ml
Coil Resistance: 1.2ohm
Suitable Nic-salt Content: 12mg-50mg
Multi-functional Pod-style Atomizer with Unique Structure
Easy-to-operate Pluggable Design Atomizer
Unique 1.2ohm Coil for Nicotine Salt
Thread: 510
Colours: Orange, Blue, Purple, Black, Red, Clear
___________________________________________________________________
Atomizer Base
The Kit comes with a pod pre-installed into the atomizer base which has a 510 thread and is made out of Stainless Steel, you also receive a second pod section so pretty sure just the pod sections will be sold separately making them cheap as the base seems well made and very durable. Looking inside the base we can see 2 spring loaded contacts and central we can see where the 510 has been secured, also there is 2 little grooves (one either side) which is for notches on the pod to slide into which locks the pod into the correct position, it is mainly secured by press fitting, the pod fits nice and tight. On both sides of the base section we have 3 small airflow holes and also one side branding. Looking at the bottom of the atomizer base it looks just like the bottom of any other atty with printed branding, safety stamps and a Gold plated 510.
___________________________________________________________________
The Pod
The Pod is designed so when it is fitted into the atomizer base it looks more like a disposable atomiser than a pod. It is one piece and the mouth section is shaped like a MTL drip tip with a narrow bore. The bottom section of the pod where it gets fitted into the atomizer base has a notch either side to slide into the already mentioned grooves. Looking at the base we have 2 contacts and 2 silicone bungs which need removing for filling. I would remove both so as you fill using one port air can escape from the other, the bungs plug in nice and deep to fully seal the ports. The ports are not the biggest so care needs to be taken when filling to avoid a mess and the bungs don't stay attached to the pod when removing, no spares are supplied. Going back to the bottom section of the pod towards the bottom, one each side we have very small airflow slits. The pod has a 1.2ohm MTL coil pre-installed and the pod is a sealed unit so just like a disposable pod from a pod system once the flavour has dropped off it needs throwing and a new pod using, the pod holds 2ml of e-liquid and you receive one with the atomizer base as a complete unit and a spare pod section without base as only this section is disposable.
___________________________________________________________________
Falcons Mod Specs and Features:
Dimension: 32.5 x 26.0 x 75.0mm
Material: PC+ABS
Battery: Built-in 2000mAh
Max Output Voltage: 4.2V
Max Output Current: 30A
USB: 5V/1A
Resistance Range: 0.1ohm-3.0ohm
Light of Voltage: 3.0-3.7V(RED); 3.7-4.2V(Blue)
Voltage Indicator Light and Multiple Protections
Thread: 510
Colours: Orange Green, Blue Red, Purple Yellow, Black, Red, White
___________________________________________________________________
The Falcons Mod
The Falcons Mod is a 2000mAh direct output device which has no menu or screen, simply press the fire button and vape. The device is the usual 5 clicks of the fire button to turn on and 5 clicks to turn off, on the front of the device is a long vertical LED strip that flashes 3 times to indicate the device as successfully been turned on or off. The LED strip also gives battery life indication by lighting Blue when vaping to indicate the battery is between 3.7V and 4.2V and Red when it's between 3.0V and 3.7V. when putting on charge the light flashes blue 3 times, then Red three times before lighting Red until the charge reaches 3.7V then turns Blue, when the device is fully charged it will flash Blue 20 times and then the light will go off. The device also has safety protections which as usual when they kick in will be indicated by various amount of flashes from the LED strip, my only issue with the device is battery indication could be done much better it's only slightly better than having none at all.
___________________________________________________________________
Protections
Over-vape protection
Low voltage protection
Short circuit protection
Charging Protection
___________________________________________________________________
Using Independently
There is absolutely nothing stopping you from using the pod once screwed into the atomizer base on another device and of course the Falcons Mod can be used with other atty's just bare in mind it's a direct output device and loses power as the battery runs down (less noticeable with higher resistance coils).
___________________________________________________________________
Disposable Tanks?
Do we need disposable tanks? well they have their uses and with this kit the argument could be made it's a pod on top of a mod so what's the difference between this and using disposable pods full-stop. Those that will be against the Pod One Atomizer have an argument if they are against pod systems also else it's a case of when it suits.
The Pod One is made from recyclable materials!
___________________________________________________________________
My Experience Using The Falcons Kit
I don't know how the device would perform and how well the battery would last using in the other 2 kit options but with the Pod One this is a really good MTL set-up. The flavour is more than acceptable, fair vaper production and a draw which is pretty much identical to taking a draw from a cigarette. The draw isn't super tight but certainly nowhere near loose enough to have a direct lung hit. The battery life was also very good using the Falcons with the Pod One and drop off was barely noticeable. The device feels great in the hand and the raised rim on the shield fire button which is on a slight slant is very easy to find as well as being very clicky. You do need to like the draw though as the airflow is non adjustable and battery indication is next to useless. The device supports 1A charging and took just over 1.5 hours to charge.
___________________________________________________________________
Likes
Nice Rubber feel finish
Lightweight
Good colour options
Pocket friendly
Ergonomic
Aesthetically pleasing
Authentic MTL Draw
Good flavour (compared to other pods)
Fair vaper production
Convenient
Only pod section needs replacing (not atomizer base)
2 Pods included
Good battery life (with this set-up)
Pod with base and Falcons Mod can be used independently (But work together very well)
1A charging
Budget price range
Cons
Poor battery status indication
Airflow non-adjustable
Direct output (power decreases along with voltage on battery)
Bungs for pods could be dropped and lost (no spares)
Fill ports are a reasonable size but not large so do need to fill slowly
Sealed Pod, coil heads can't be replaced
I would once again like to thank Cortana from the Healthcabin for supplying the Tesla Falcons Starter Kit with Pod One Atomizer for the purpose of this review.
https://www.healthcabin.net/tesla-falcon...18695.html
___________________________________________________________________
https://www.healthcabin.net/tesla-falcon...18695.html
Introduction
The Falcons by Teslacigs is available in 3 different kit forms, paired with the Resin sub-ohm tank, paired with the disposable One Tank and this version i am having a look at paired with the Pod One which is a Pod Tank Hybrid. The Falcons mod is a lightweight simple direct output device with built-in 2000mAh battery and the Pod One has an installed 1.2ohm coil and gives an authentic MTL draw, very similar to taking a draw from a cigarette!
___________________________________________________________________
In the Box
Contents:
1 x Falcons MOD 2000mAh
1 x Pod One Cartridge（1.2ohm Coil Pre-installed）
1 x Pod One Adaptor
1 x Accessory Bag
1 x USB Cable
2 x User Manual
___________________________________________________________________
Aesthetics and Ergonomics
The Falcons Pod One Kit came in Teslacig's new style cardboard packaging with sleeve which has cutouts. On opening the packaging in the top tray we had a colourful Falcons mod, pod and atomizer base as a complete unit and a spare pod section. I received the Orange Green version which is Orange at the top, Green at the bottom and around the middle both colours fused together, the included pods are Orange. The other versions are Blue Red, Purple Yellow, Black, Red, and White, the Black, Red and White versions are speckled and all come with pods that match. The device itself is plastic with rubber coating and extremely lightweight, they are the same material and finish as the popular WYE so if you like the look and feel of the WYE then you will like the Falcons both aesthetically and feel in the hand. The device is quite small almost like a very short pen style just boxed out a bit to give it a box mod look. Top, bottom and front of the device is Black (sides and spine are colour of choice), on the base we have safety stamps cut into the finish and venting. The front of the device has a shield shape fire button at the top which has raised logo and rim, at the bottom is the micro USB port then between the fire button and the USB port we have a long vertical LED strip. On both sides of the deice we have raised plaques, one has "FALCONS" cut into it, the other "TESLACIGS", moving to the spine we have some textured design for grip. Up top we have a slightly raised 510 plate (raised just enough to protect the device without causing noticeable gaping) with Gold plated, spring loaded 510. The device is of good quality for a device made of cheaper materials and ergonomically very good.
___________________________________________________________________
Pod One Atomizer Specs and Features:
Dimension: 22 x 38mm
Material: Stainless Steel+PC
Capacity: 2ml
Coil Resistance: 1.2ohm
Suitable Nic-salt Content: 12mg-50mg
Multi-functional Pod-style Atomizer with Unique Structure
Easy-to-operate Pluggable Design Atomizer
Unique 1.2ohm Coil for Nicotine Salt
Thread: 510
Colours: Orange, Blue, Purple, Black, Red, Clear
___________________________________________________________________
Atomizer Base
The Kit comes with a pod pre-installed into the atomizer base which has a 510 thread and is made out of Stainless Steel, you also receive a second pod section so pretty sure just the pod sections will be sold separately making them cheap as the base seems well made and very durable. Looking inside the base we can see 2 spring loaded contacts and central we can see where the 510 has been secured, also there is 2 little grooves (one either side) which is for notches on the pod to slide into which locks the pod into the correct position, it is mainly secured by press fitting, the pod fits nice and tight. On both sides of the base section we have 3 small airflow holes and also one side branding. Looking at the bottom of the atomizer base it looks just like the bottom of any other atty with printed branding, safety stamps and a Gold plated 510.
___________________________________________________________________
The Pod
The Pod is designed so when it is fitted into the atomizer base it looks more like a disposable atomiser than a pod. It is one piece and the mouth section is shaped like a MTL drip tip with a narrow bore. The bottom section of the pod where it gets fitted into the atomizer base has a notch either side to slide into the already mentioned grooves. Looking at the base we have 2 contacts and 2 silicone bungs which need removing for filling. I would remove both so as you fill using one port air can escape from the other, the bungs plug in nice and deep to fully seal the ports. The ports are not the biggest so care needs to be taken when filling to avoid a mess and the bungs don't stay attached to the pod when removing, no spares are supplied. Going back to the bottom section of the pod towards the bottom, one each side we have very small airflow slits. The pod has a 1.2ohm MTL coil pre-installed and the pod is a sealed unit so just like a disposable pod from a pod system once the flavour has dropped off it needs throwing and a new pod using, the pod holds 2ml of e-liquid and you receive one with the atomizer base as a complete unit and a spare pod section without base as only this section is disposable.
___________________________________________________________________
Falcons Mod Specs and Features:
Dimension: 32.5 x 26.0 x 75.0mm
Material: PC+ABS
Battery: Built-in 2000mAh
Max Output Voltage: 4.2V
Max Output Current: 30A
USB: 5V/1A
Resistance Range: 0.1ohm-3.0ohm
Light of Voltage: 3.0-3.7V(RED); 3.7-4.2V(Blue)
Voltage Indicator Light and Multiple Protections
Thread: 510
Colours: Orange Green, Blue Red, Purple Yellow, Black, Red, White
___________________________________________________________________
The Falcons Mod
The Falcons Mod is a 2000mAh direct output device which has no menu or screen, simply press the fire button and vape. The device is the usual 5 clicks of the fire button to turn on and 5 clicks to turn off, on the front of the device is a long vertical LED strip that flashes 3 times to indicate the device as successfully been turned on or off. The LED strip also gives battery life indication by lighting Blue when vaping to indicate the battery is between 3.7V and 4.2V and Red when it's between 3.0V and 3.7V. when putting on charge the light flashes blue 3 times, then Red three times before lighting Red until the charge reaches 3.7V then turns Blue, when the device is fully charged it will flash Blue 20 times and then the light will go off. The device also has safety protections which as usual when they kick in will be indicated by various amount of flashes from the LED strip, my only issue with the device is battery indication could be done much better it's only slightly better than having none at all.
___________________________________________________________________
Protections
Over-vape protection
Low voltage protection
Short circuit protection
Charging Protection
___________________________________________________________________
Using Independently
There is absolutely nothing stopping you from using the pod once screwed into the atomizer base on another device and of course the Falcons Mod can be used with other atty's just bare in mind it's a direct output device and loses power as the battery runs down (less noticeable with higher resistance coils).
___________________________________________________________________
Disposable Tanks?
Do we need disposable tanks? well they have their uses and with this kit the argument could be made it's a pod on top of a mod so what's the difference between this and using disposable pods full-stop. Those that will be against the Pod One Atomizer have an argument if they are against pod systems also else it's a case of when it suits.
The Pod One is made from recyclable materials!
___________________________________________________________________
My Experience Using The Falcons Kit
I don't know how the device would perform and how well the battery would last using in the other 2 kit options but with the Pod One this is a really good MTL set-up. The flavour is more than acceptable, fair vaper production and a draw which is pretty much identical to taking a draw from a cigarette. The draw isn't super tight but certainly nowhere near loose enough to have a direct lung hit. The battery life was also very good using the Falcons with the Pod One and drop off was barely noticeable. The device feels great in the hand and the raised rim on the shield fire button which is on a slight slant is very easy to find as well as being very clicky. You do need to like the draw though as the airflow is non adjustable and battery indication is next to useless. The device supports 1A charging and took just over 1.5 hours to charge.
___________________________________________________________________
Likes
Nice Rubber feel finish
Lightweight
Good colour options
Pocket friendly
Ergonomic
Aesthetically pleasing
Authentic MTL Draw
Good flavour (compared to other pods)
Fair vaper production
Convenient
Only pod section needs replacing (not atomizer base)
2 Pods included
Good battery life (with this set-up)
Pod with base and Falcons Mod can be used independently (But work together very well)
1A charging
Budget price range
Cons
Poor battery status indication
Airflow non-adjustable
Direct output (power decreases along with voltage on battery)
Bungs for pods could be dropped and lost (no spares)
Fill ports are a reasonable size but not large so do need to fill slowly
Sealed Pod, coil heads can't be replaced
I would once again like to thank Cortana from the Healthcabin for supplying the Tesla Falcons Starter Kit with Pod One Atomizer for the purpose of this review.
https://www.healthcabin.net/tesla-falcon...18695.html
___________________________________________________________________
