The Reomiser 2

[johan]

I shall indeed. just trying to work out the battery lowest voltage I can safely vape it at

My multimeter from ohm @johan is reading at 4.


Wish I had taken science in school

Open your right eye as well and you will see it displays more than just "4."

 

[Yiannaki]

Hi all
Any suggestion for other atty's to try on my LP Reo Mini? I only have the RM2 at the moment.

I know @Alex uses the Atomic and is super happy with it.

@Andre and @Rob Fisher seem to be loving their cyclone AFC's

 

[RIEFY]

if I could afford one id probably go for a cyclone with afc. my atomic is in the process of being modded. have used a trident on the reo and it was damn good aswell

Sent from my GT-I9500 using Tapatalk HD

 

[Andre]

Hi all
Any suggestion for other atty's to try on my LP Reo Mini? I only have the RM2 at the moment.

Yip, the Cyclone with AFC is truly awesome. @Rob Fisher has some coming in on a group buy and might have some spare. Just PM him. It includes the Cyclone, AFC and Fusion Drip Tip. Very expensive, but worth it imo.
Am getting in an Atomic from VapeClub, will share my impressions.

 

[Morne]

Ok, so I got my atomic from @JakesSA Thanks!!

This is my first attempt. I did a dual coil, 26g, 9/10 wraps. It's at 0.78 ohm
On the smallest hole, it's got good flavor, but very little vapor. The bigger I go with the air flow, the more vapor produce but I loose the flavor. I also think I've got too much wick, I might go with less wick.

 

[Andre]

Ok, so I got my atomic from @JakesSA Thanks!!

This is my first attempt. I did a dual coil, 26g, 9/10 wraps. It's at 0.78 ohm
On the smallest hole, it's got good flavor, but very little vapor. The bigger I go with the air flow, the more vapor produce but I loose the flavor. I also think I've got too much wick, I might go with less wick.
View attachment 9458 View attachment 9459 View attachment 9460

Yip, agree try less wick. Maybe go for around 0.6 ohms?

 

[Morne]

Yip, agree try less wick. Maybe go for around 0.6 ohms?

Is 0.6 ohm still ok/safe for these efest 18500 batteries?

 

[Andre]

Is 0.6 ohm still ok/safe for these efest 18500 batteries?

Yip, quite safe from all the charts I have seen.

 

[Alex]

@Morne, depending on the juice, but I prefer the smallest air holes for great flavour. Also try having the coils at the same height as the post holes, and loop the wick under the coil. Making sure to leave some open space directly under the coil

 

[Yiannaki]

@Morne, depending on the juice, but I prefer the smallest air holes for great flavour.

Is the smallest air hole 1 mm?

 

[Alex]

Is the smallest air hole 1 mm?

Atomic RDA clone by Infinite

The Atomic rebuildable atomizer is a great device for all of you that are looking to get the best flavor and vapor out of a RDA.

Product Features:
Stainless Steel4-piece construction
Three posts with Phillips Head Screws
Perfect for single or dual coil builds
Airflow control-outer sleeve for single or dual air holes
Air hole sizes: 1.5mm,2mm,3mm
Includes spare O-rings,wick, and wire
High quality precision machining
Drip tip not included
510 connection

 

[The Golf]

So build my first ugly coil, have to not fan of it cause well its UGLY.

 

[The Golf]

Have to say flavour is freaking awesome lol I dnt care how it looks. Twisted ribbon 1mmx0.1 I think well its a .6ohm coil

 

[Andre]

So build my first ugly coil, have to not fan of it cause well its UGLY.

Lol, I know the feeling having grown up on micro coils!

 

[The Golf]

 

[Yiannaki]

So build my first ugly coil, have to not fan of it cause well its UGLY.

Ugly is the new fashion

Cool coil bud!

I've got some 0.9 x 0.1 ribbon here and I'm contemplating wrapping something.

It's just that I'm so happy with my current (2 day old) setup that I'm unsure if I should risk spoiling it. Lol

Being a newbie at rebuildables, I run a higher risk of replacing an awesome one with a terrible one. Which will then cause me to enter coil depression

 

[The Golf]

Keep it until you get bored, lol my guess probably by midweek. I hav the same problem. If I hav a coil I love and its wrking y mess with it

 

[RIEFY]

found my sweet spot on the Atomic Aka Rm4 9 wraps 2mm id 26g ugly coil .78 ohms with 6mg juice using rayon as wick. its heavenly. using the 3mm airhole. My reason for modding this atty was to see if I could grow to like dual coils but nope im a single coil fan.

Sent from my GT-I9500 using Tapatalk HD

 

[Silver]

Awesome photo @Cape vaping supplies !
Dense cloud!

 

[RIEFY]

Awesome photo @Cape vaping supplies !
Dense cloud!

Thanks @Silver this is hopefully the transition to 6mg. so much want to go down

Sent from my GT-I9500 using Tapatalk HD

 

[Morne]

found my sweet spot on the Atomic Aka Rm4 9 wraps 2mm id 26g ugly coil .78 ohms with 6mg juice using rayon as wick. its heavenly. using the 3mm airhole. My reason for modding this atty was to see if I could grow to like dual coils but nope im a single coil fan.

Sent from my GT-I9500 using Tapatalk HD

nice one!! I will try this build tomorrow..... I'm also not getting the dual coil to work well.

 

[RIEFY]

nice one!! I will try this build tomorrow..... I'm also not getting the dual coil to work well.

I dont know but for some reason I cant get to like dual coils at all. even in commercial tanks I prefer singles.

Sent from my GT-I9500 using Tapatalk HD

 

[MarkK]

@Cape vaping supplies do not worry about it, I am a single coil guy myself, its less maintenance and seems much easier to get your vape exactly where you want it

 

[The Golf]

Hold the ph, since when do you own a copper vein @cvs

 

[RIEFY]

Hold the ph, since when do you own a copper vein @cvs

almost 2weeks allready bru. sold the woody to @MurderDoll

Sent from my GT-I9500 using Tapatalk HD