What To Put On A Mech-mod

Rob Fisher

Rob Fisher

ECIGSSA Admin
Staff member
Administrator
VIP
FINES MASTER
LV
69
 
Joined
3/2/14
Posts
39,918
Awards
52
Age
69
Location
Winston Park, Durbs
I have a Nemesis and a Magneto and nothing on either of them... I have it on good authority that I shouldn't put a normal atomiser on them... I have an original Russian 91% coming for one of the device... so my question is what should I put on the other one?

MechMod 004.JPG
 
3D Atomiser is my vote
 
BhavZ said:
VK will be stocking them soon.

If you have not played with genesis style atomiser that might also be a route to go.
Click to expand...

I haven't played with a Genesis type yet... again any recommendation and source?
 
IGO-W3 is a brilliant dripper from the reviews I have seen.

The 3D though has the whole squonk aspect to it and holds 1.5ml of juice.
 
rob you can try out my aga t2 if you want a bit of a challenge :) heck knows i haven't gotten it performing right so far
 
denizenx said:
rob you can try out my aga t2 if you want a bit of a challenge :) heck knows i haven't gotten it performing right so far
Click to expand...

That's the last thing I want... a challenge... I just looked at a YouTube video of the Kraken Clone and doesn't appear to be up my alley either...

Ok off to search for an IGO-L...

Thanks boys!
 
Hi Rob - I certainly agree with @Matthee's suggestion of the IGO-L
He recommended I get one some moons ago - and I listened - and I am happy with it.
Simple yet deadly. (said with a grin from ear to ear)

Can easily be configured to knock you like a train with the right juice - or give wonderful depth of flavour...

But - it's a dripper - so drip.... 6 to 8 puffs.... then... drip..... 6 to 8 puffs....

And you have to build the coil - but that's quite easy and the screws are nice to hold the coil down with (at least on mine).
 
Silver said:
Hi Rob - I certainly agree with @Matthee's suggestion of the IGO-L
He recommended I get one some moons ago - and I listened - and I am happy with it.
Simple yet deadly. (said with a grin from ear to ear)

Can easily be configured to knock you like a train with the right juice - or give wonderful depth of flavour...

But - it's a dripper - so drip.... 6 to 8 puffs.... then... drip..... 6 to 8 puffs....

And you have to build the coil - but that's quite easy and the screws are nice to hold the coil down with (at least on mine).
Click to expand...

Thanks Hi Ho... it seems that without exception the dripper of choice is an IGO-L.

Now the question I have is that if the IGO-L is so the overwhelming choice of dripper by people I consider well versed on the subject and dare I say experts then why on earth don't the local vendors stock it?

Is this the right one?

https://www.fasttech.com/products/0/10005100/1400500-igo-l-rebuildable-stainless-steel-dripping
 
That's the one Rob

Beats me why it's not more available locally. I got mine some time ago from VapeSA.co.za - but theyve been out of stock for a while.

I haven't tried any other drippers but I think why this one is good is that it is very simple. Not much to configure or go wrong.

I think other folk on the forum have more experience with different drippers - but this little thing works nicely for me.
 
Rob - Avoid Kraken, RSST, Steam Turbine or Genesis style Atomiser - they are a real PITA to build. If you found Kayfun at all difficult avoid the Ithaka and Aqua and this aforementioned selection like the plague

Find an IgoL if you can, its very easy to work on.

The trident is even easier, and VK are getting stock shortly. Has slotted posts like the reomiser which makes capturing coils much easier.

The IgoW3 is a little more advanced, and can be tricky to build on, but not impossible.

Easiest is Trident, then IgoL then IgoW3
 
devdev said:
Rob - Avoid Kraken, RSST, Steam Turbine or Genesis style Atomiser - they are a real PITA to build. If you found Kayfun at all difficult avoid the Ithaka and Aqua and this aforementioned selection like the plague

Find an IgoL if you can, its very easy to work on.

The trident is even easier, and VK are getting stock shortly. Has slotted posts like the reomiser which makes capturing coils much easier.

The IgoW3 is a little more advanced, and can be tricky to build on, but not impossible.

Easiest is Trident, then IgoL then IgoW3
Click to expand...

Thanks @devdev will try the Trident and IGO-L! And thanks for the warning on the others!
 
I would wait for the Vape Ving stock to arrive. Will be here in next 7 days or so. Right @Stroodlepuff

A Slowtech order will take 3 or 4 times that long
 
Also thinking of the igo-l. Will pop you a pm just now with link.

Sent from my SM-N9005 using Tapatalk
 
@Rob Fisher check with @Cape vaping supplies. I got my IGO-L from him and its a solid piece. Love my little dripper and it vapes like a freight train. The nice thing about it is that apart from being easy to build on, you can just as easily reposition the coil to get the vape you desire.
 
BhavZ said:
@Rob Fisher check with @Cape vaping supplies. I got my IGO-L from him and its a solid piece. Love my little dripper and it vapes like a freight train. The nice thing about it is that apart from being easy to build on, you can just as easily reposition the coil to get the vape you desire.
Click to expand...

Thanks @BhavZ I just PM'ed him!
 
You must log in or register to reply here.

Similar threads

Old_Goat
HellVape Trishul V2 Semi-Mech Mod Review
Replies
0
Views
249
Old_Goat
Old_Goat
Old_Goat
The Blaze of Confusion: Clearing the Cloud on Thunderhead, ThunderCloud, and a Whole Lot of Goats
Replies
0
Views
108
Old_Goat
Old_Goat
V
Can You Bring a Vape on a Plane
Replies
1
Views
248
Stew
Stew
Old_Goat
Vaping with a Beard – A Hairy Situation
Replies
4
Views
393
Stew
Stew
Stew
Vandyvape Gaur-21 rubber pad on base
Replies
0
Views
229
Stew
Stew
Back
Top