Dem builds

[Dietz]

Tried my 1st Parallel Coil that I also decided will be a Vertical Coil.
Now Please keep in mind this is my Second Coil, so Its not as Pro looking as the rest here and is also not a Super Awesome Next level Extraterrestrial Build.
It started out as a 3mm 24g NI80 6 Wrap parallel, but had to take out a wrap or two to fit better.

Ive been thinking about a better way to use a Single Coil in my Troll since @Idiot showed me I can run a Single Coil in it, But my OCD does not like the fact that One side has no Coil, it just feels wrong.

So what Ive found is this is not the Best setup, Heats up quite alot of the Air holes are not open Fully.
Its not a Bad Build, but I think it can be better if I do this as a Horizontal Build in between the posts instead.

EDIT: also this was done with a 3mm Allan key and normal pliers. no Fancy tools

 

[PSySpin]

@Dietz it is a nice looking coil build especially for the fact that this is only your second coil build, upload a pic when you have made the horizontal build.

 

[Chris du Toit]

Tried my 1st Parallel Coil that I also decided will be a Vertical Coil.
Now Please keep in mind this is my Second Coil, so Its not as Pro looking as the rest here and is also not a Super Awesome Next level Extraterrestrial Build.
It started out as a 3mm 24g NI80 6 Wrap parallel, but had to take out a wrap or two to fit better.

Ive been thinking about a better way to use a Single Coil in my Troll since @Idiot showed me I can run a Single Coil in it, But my OCD does not like the fact that One side has no Coil, it just feels wrong.

So what Ive found is this is not the Best setup, Heats up quite alot of the Air holes are not open Fully.
Its not a Bad Build, but I think it can be better if I do this as a Horizontal Build in between the posts instead.

View attachment 84117 View attachment 84118 View attachment 84119

Looks great bud, very neat! Vertical coil should actually be a better vape than horizontal. When vertical the air will hit your coil dead on whereas with horizontal its going to hit the cotton. But give it a bash and see what the difference is like, always fun to experiment

 

[Stosta]

Tried my 1st Parallel Coil that I also decided will be a Vertical Coil.
Now Please keep in mind this is my Second Coil, so Its not as Pro looking as the rest here and is also not a Super Awesome Next level Extraterrestrial Build.
It started out as a 3mm 24g NI80 6 Wrap parallel, but had to take out a wrap or two to fit better.

Ive been thinking about a better way to use a Single Coil in my Troll since @Idiot showed me I can run a Single Coil in it, But my OCD does not like the fact that One side has no Coil, it just feels wrong.

So what Ive found is this is not the Best setup, Heats up quite alot of the Air holes are not open Fully.
Its not a Bad Build, but I think it can be better if I do this as a Horizontal Build in between the posts instead.

View attachment 84117 View attachment 84118 View attachment 84119

Neater than any coil I've ever built! Nicely done @Dietz !

 

[GerritVisagie]

Looking good @Dietz
Keep em coming brother


Sent from my iPhone 7+ using Tapatalk

 

[KZOR]

Played around with ribbon wire and this is the first attempt i came up with.

 

[PSySpin]

nice looking build, how does it vape?

 

[KZOR]

To be honest with you ....... there is so little difference between these more complex builds, claptons and plain SS or Nichr80.
Great flavor but similar to my SS claptons which is way less trouble to build.

 

[IamVaper7of9]

@Dietz, post a pic with the cotton in. I can't picture how the top bit will fold over?

Sent from my LG-H850 using Tapatalk

 

[Dietz]

@Dietz, post a pic with the cotton in. I can't picture how the top bit will fold over?

Sent from my LG-H850 using Tapatalk

It doesnt Fold Over, I trimmed it at the top at the two posts

 

[Kilherza]

2.5mm on tfv8 rba

 

[Mr_Puffs]

Simple yet delicious...
24g SS316L 7 wrap over 3mm ID and comes in at 0.18.

 

[Silver]

Great photo and lovely looking coil @Mr_Puffs

 

[Mr_Puffs]

Great photo and lovely looking coil @Mr_Puffs

Appreciated as always, thanks @Silver!

 

[Mr_Puffs]

Anyone want to have a guess?

 

[zadiac]

Nice. I like it.

 

[Mr_Puffs]

Nice. I like it.

Real flavour house coil right there! And thanks man appreciate it.

 

[Dietz]

Anyone want to have a guess?
View attachment 85079 View attachment 85080 View attachment 85081 View attachment 85082

@Mr_Puffs
THat is one sweet looking build man!!!

 

[Mr_Puffs]

@Mr_Puffs
THat is one sweet looking build man!!!

Thanks!! Vapes as good as it looks.

 

[KZOR]

Played around with a new build and it is great.
3 x 0,5 ribbon wires stacked and claptoned with a SS 38ga

 

[Cor]

sleepy sleepy wire

 

[KZOR]

Made about 30 SS clapton coils while deejaying last night. (2x26ga wrapped with 34ga)
Did a quick build on my brass goon and thought you might like the colors as well.
Absolutely LOVE this build.

 

[KZOR]

Made a quick zipper and thought it would go well with the photo of the moon i took.

 

[Silver]

Gorgeous looking clapton coils @KZOR
You must have been playing lots of Clapton music last night?
Hehe

PS - big ups for being able to multi-task like that

Even when I build coils - nowhere near as complex as yours - the wife knows she is not allowed to interupt me during the process otherwise I might make a mistake. Lol

 

[Tockit]

Made about 30 SS clapton coils while deejaying last night. (2x26ga wrapped with 34ga)
Did a quick build on my brass goon and thought you might like the colors as well.
Absolutely LOVE this build.
View attachment 85419 View attachment 85420 View attachment 85421 View attachment 85422 View attachment 85423

Politically correct speaking, they are fused claptons. looking very sexy though

Sent from my E2333 using Tapatalk