Polishing Vape Gear

Rob Fisher

ECIGSSA Admin
Staff member
Administrator
VIP
FINES MASTER
LV
64
 
Joined
3/2/14
Posts
39,303
Awards
51
Age
68
Location
Winston Park, Durbs
I have to say after watching some YouTube videos on refurbishing old metal objects I decided to try polishing my Dvarw's with the Dremel. It is very satisfying and really easy to do!

The Novus is to polish my drip tips with. Flitz is the final polish with a rag.
Dremel Polish 1.JPG
I got the hand held exntention for the Dremel and it's a whole heap easier to handle!
Dremel Polish 2.JPG

I also got a small vice to hold the Dremel head when I need two hands on the time I am polishing.
Dremel Polish 3.JPG

Before!
Dremel Polish 4.JPG

After and ready for sunlight cleaning with a toothbrush.
Dremel Polish 5.JPG

Bazinga!
Dremel Polish 6.JPG
 
MyUS for the HUGE WIN! I have had three parcels via DHL from MyUS in the last week! Make sure you select DHL because FedEx sucks noogies!

Excellent, thanks for the info, I will begin abusing MyUS immediately!
One thing to note though, the new SARS rule about only allowing 3 shipments per individual per year is generally being enforced by couriers, so maybe check that out before ordering again!
 
Excellent, thanks for the info, I will begin abusing MyUS immediately!
One thing to note though, the new SARS rule about only allowing 3 shipments per individual per year is generally being enforced by couriers, so maybe check that out before ordering again!

Touch wood... never had an issue and I get at least two DHL parcels a month from MyUS and have done for the last year or two.
 
@Rob Fisher toothpaste is a perfect final polish abrasive before cleaning. Just use a little moisture while polishing. Before the final rinse.
 
Can we see the full pic pf the fish pls @Rob Fisher
dremel-polish-3-jpg.196024
 
Will try some Aquafresh tomorrow! :)
Just a tip. Mix it if it's aqua fresh.
The gell type toothpaste dont work so well. The abrasive is in the white of the toothpaste,but the Aquafresh should work well if mixed. The blue gell Colgate works fine. The white one even better.
 
Thanks to Riaan for reminding me I had a Modmaker thingy I bough to shine tube mods on a drill... it also has an attachment to take attys! Bazinga!
Drill Polish 02.JPG Drill Polish 04.JPG

Oh wow, that was a lot easier!
Drill Polish 05.JPG
 
Last edited:
OK, it's official... the best result is to polish with the Dremel using red rouge first and then finishing it off on the Modmaker Drill thingy with Flitz! And an added bonus is Flitz polishes the drip tips as well! So this is an all-around Bazinga and a Chicken Dinner!
Polish Dremel then Drill 1.JPG Polish Dremel then Drill 2.JPG Polish Dremel then Drill 3.JPG
 
I have been searching online for a Desktop buffing wheel but all I can find is Desktop grinders? Are they the same thing and can the grinding wheel be replaced with a buffing pad?
Bench Grinder.jpg
 
I got my paws on a Ti Goon,the barrel had several scratches so I also set on a quest to restore it.

Before
D0254865-3478-4CEC-B12A-C69E8FB0B2C4.jpeg

Hand polish using Autosol:
FB953FDB-11EF-479C-9CC1-E3FDAE70D44C.jpeg

Some more elbow grease with the Autosol:
1CFA257D-0AB7-4E6B-92BE-EFD07C8E69E4.jpeg

Finally used the Dremel as well:
0A31332E-2058-4396-BEA9-A872A9D8A1D1.jpeg 1FC2C203-698D-4884-8716-ADAF451A1AC3.jpeg

A mate also asked me to polish his normal SS OG Goon,turned out quite nice:
6D69F1F6-2128-4052-9D08-8AAA0CF60AA8.jpeg

Side by side with the Ti:
3481CA97-4AC0-4AB5-8814-821323484ECB.jpeg
 
I have been searching online for a Desktop buffing wheel but all I can find is Desktop grinders? Are they the same thing and can the grinding wheel be replaced with a buffing pad?
View attachment 196107

You can replace the wheels if need be. The buffing well you get need to have the same diameter mandrel/arbor as the existing wheel. It makes it an easy swop.

You can also get the same results with a drill fitted with a buffing wheel and a drill clamp. The drill will be noisy. Much more dB than a bench grinder will output.
Making the bench grinder sensible for night te use.
Also you get an extension for the bench grinder with a tapered mandrill which can basically host different size diameter buffing wheels
images-274.jpeg images-275.jpeg
Two clamp style mandrillsimages-276.jpeg
And screw type taperd ,any size should work that's smaller than the max thread. Thread direction to be checked. Grinder wheel rotates clockwise on the left and anti clock on the right side
 
Last edited:
Many thanks @Resistance! I finally found a dedicated buffing wheel at Cape Watch Company! Bazinga!
View attachment 196119

Love your shiny Goons! Chicken Dinner!

@Rob Fisher that's nice.
Although if you get the grinder you get all the attachments with to use as a grinder as well . especially for the fishing gear and stuff that needs sharpening
Like knives and grinding a bolt flat etc.
Still if you feel it better to have a dedicated setup then go for it.
 
Back
Top