Aromamizer Supreme Mini Review

[AlphaDog]

I received the tank today from SirVape.

General notes:

• This tank is big and heavy
• The build quality is exceptional, everything feels very solid and weighty
• Top fill is a welcome addition
• Juice flow control works very well
• Wide open, the airflow feels like double the amount compared to the V1 (where two holes faces the coils and the other two holes are blocked by the build deck posts - and no silicone band) I noticed that it is also quieter - I don't hear the same turbulence from the airflow as I experience with the V1
• Big build deck with nice snap in notches ensuring that the coils always face the air holes.

I have a dual horizontal clapton build in it, 5 wraps, 2.5mm ID @ 0.31Ohms.
i have exactly the same build in the V1 tank with which to compare.

So, the verdict is as follows:

The tank performs exceptionally well - tons of flavour and huge clouds. The airflow is very smooth and refined. it doesn't seem to get as hot as the V1, even at 65 watts.

The wicking is fantastic - better and faster than the V1 with bubbles rising quickly after each drag.

Flavour wise, the V1 is very close to this tank and I don't feel that there is a big difference. I have the same juice and the same build in both tanks so it was easier to compare. Vapour production however, is much denser with the Supreme.

I am very happy, already vaped about 8mls on it!

I recommend this tank to those who appreciate great build quality, well thought out design, and tons of flavour/clouds!

Steam Crave, you guys did it again!

 

[Andre]

Great, to the point review. Thanks. Am waiting for the kit to convert the V1 to V2 - the Supreme is just too big for my liking.

 

[Waine]

I received the tank today from SirVape.

General notes:

• This tank is big and heavy
• The build quality is exceptional, everything feels very solid and weighty
• Top fill is a welcome addition
• Juice flow control works very well
• Wide open, the airflow feels like double the amount compared to the V1 (where two holes faces the coils and the other two holes are blocked by the build deck posts - and no silicone band) I noticed that it is also quieter - I don't hear the same turbulence from the airflow as I experience with the V1
• Big build deck with nice snap in notches ensuring that the coils always face the air holes.

I have a dual horizontal clapton build in it, 5 wraps, 2.5mm ID @ 0.31Ohms.
i have exactly the same build in the V1 tank with which to compare.

So, the verdict is as follows:

The tank performs exceptionally well - tons of flavour and huge clouds. The airflow is very smooth and refined. it doesn't seem to get as hot as the V1, even at 65 watts.

The wicking is fantastic - better and faster than the V1 with bubbles rising quickly after each drag.

Flavour wise, the V1 is very close to this tank and I don't feel that there is a big difference. I have the same juice and the same build in both tanks so it was easier to compare. Vapour production however, is much denser with the Supreme.

I am very happy, already vaped about 8mls on it!

I recommend this tank to those who appreciate great build quality, well thought out design, and tons of flavour/clouds!

Steam Crave, you guys did it again!

Thanks for the excellent concise review. Very informative, as I have been eying it. For me, the build size is impressive. BTW, it totally dwarfs that mod in the pic. It's a steam beast!

Sent from my GT-I9500 using Tapatalk

 

[AlphaDog]

Great, to the point review. Thanks. Am waiting for the kit to convert the V1 to V2 - the Supreme is just too big for my liking.

The V1 was already a good tank. This one is just answering all the criticism the original got.

I'm just glad that for once, I have two setups that are great instead of one great setup and one average one...

 

[AlphaDog]

Thanks for the excellent concise review. Very informative, as I have been eying it. For me, the build size is impressive. BTW, it totally dwarfs that mod in the pic. It's a steam beast!

Sent from my GT-I9500 using Tapatalk

Yeah, the tank looks silly on a mod like the Evic Mini. I reckon that it'll look perfect on something like the Cuboid/Reuleaux/etc...
I have the HCigar VT200 which was designed for 22mm tanks/drippers - the Supreme is 25mm so I guess I'll have to live with the overhang...

 

[Rob Fisher]

Great review and agree on all points!

 

[daniel craig]

Great review and agree on all points!
View attachment 49813

Have you tried out your gemini as yet?

 

[Rob Fisher]

Have you tried out your gemini as yet?

Yes I have and it's nearly as nice as the Supreme... but the Supreme wins for me... but tomorrow I will have a Gemini Ceramic version and I have very high hopes for that!

 

[daniel craig]

Yes I have and it's nearly as nice as the Supreme... but the Supreme wins for me... but tomorrow I will have a Gemini Ceramic version and I have very high hopes for that!

I taught the gemini would've been better. Have you tried it with the top airflow closed?

 

[Rob Fisher]

I taught the gemini would've been better. Have you tried it with the top airflow closed?

I haven't... but I'm taking them both fully charged to the casino tomorrow and will give them a full days test.

 

[daniel craig]

I haven't... but I'm taking them both fully charged to the casino tomorrow and will give them a full days test.

Ok cool, post a review on them

 

[Silver]

I received the tank today from SirVape.

General notes:

• This tank is big and heavy
• The build quality is exceptional, everything feels very solid and weighty
• Top fill is a welcome addition
• Juice flow control works very well
• Wide open, the airflow feels like double the amount compared to the V1 (where two holes faces the coils and the other two holes are blocked by the build deck posts - and no silicone band) I noticed that it is also quieter - I don't hear the same turbulence from the airflow as I experience with the V1
• Big build deck with nice snap in notches ensuring that the coils always face the air holes.

I have a dual horizontal clapton build in it, 5 wraps, 2.5mm ID @ 0.31Ohms.
i have exactly the same build in the V1 tank with which to compare.

So, the verdict is as follows:

The tank performs exceptionally well - tons of flavour and huge clouds. The airflow is very smooth and refined. it doesn't seem to get as hot as the V1, even at 65 watts.

The wicking is fantastic - better and faster than the V1 with bubbles rising quickly after each drag.

Flavour wise, the V1 is very close to this tank and I don't feel that there is a big difference. I have the same juice and the same build in both tanks so it was easier to compare. Vapour production however, is much denser with the Supreme.

I am very happy, already vaped about 8mls on it!

I recommend this tank to those who appreciate great build quality, well thought out design, and tons of flavour/clouds!

Steam Crave, you guys did it again!

Super mini review @AlphaDog
Thanks for taking the time to capture your views
This sounds like a great tank and I like that it holds a lot of juice.

Edit - PS I have moved this to the appropriate review section

 

[Ezekiel]

Great review @AlphaDog! And thanks for all your views - been eyeing this one very closely...

 

[AlphaDog]

Hmm. Ok found a potential issue. After a while, the airflow starts to gargle. If i then blow down the chimney, a little juice seeps from the airholes and the gargling stops... do I need to close off the juice flow a little?

 

[Effjh]

Hmm. Ok found a potential issue. After a while, the airflow starts to gargle. If i then blow down the chimney, a little juice seeps from the airholes and the gargling stops... do I need to close off the juice flow a little?

I suspect it will have the same issue as the aromamiser v1 if left on it's side since the airflow is in direct line with the coils. A little juice will make it's way to the airflow holes. With this tank at least you can close airflow and juiceflow when not in use, so that should alleviate the problem. Also check your wicking or try a vertical build.

 

[AlphaDog]

I suspect it will have the same issue as the aromamiser v1 if left on it's side since the airflow is in direct line with the coils. A little juice will make it's way to the airflow holes. With this tank at least you can close airflow and juiceflow when not in use, so that should alleviate the problem. Also check your wicking or try a vertical build.

Na, the tank has not been on it's side. It started happening earlier, after I reviewed it.

 

[Effjh]

Na, the tank has not been on it's side. It started happening earlier, after I reviewed it.

It must be getting too much juice then, more cotton or close the juiceflow a little I guess?

 

[AlphaDog]

It must be getting too much juice then, more cotton or close the juiceflow a little I guess?

Yes, I suspect the same. I'm going to run it at maybe 3/4 juice flow tomorrow (mod charging now, using V1 at the moment)

 

[Lord Vetinari]

Sounds GREAT... just too big for me though

 

[AlphaDog]

Just an FYI, closing off the juice flow to about 50% sorted out the gargling. Still wicks incredibly fast!

 

[Rob Fisher]

Took the Supreme out today with it's new mod. It certainly one of the more impressive tanks that I have played with... great juice capacity and pretty good flavour as well. I have had no gurgling and have the airflow and juice flow wide open.... but I know @BigGuy was getting some gurgling and he closed off the juice flow a bit... but he did both builds and I think he just wicked mine better.

I am also pleasantly surprised with the battery life of the RX200 after my lousy results of the Rolo DNA200 I had.

 

[MurderDoll]

Took the Supreme out today with it's new mod. It certainly one of the more impressive tanks that I have played with... great juice capacity and pretty good flavour as well. I have had no gurgling and have the airflow and juice flow wide open.... but I know @BigGuy was getting some gurgling and he closed off the juice flow a bit... but he did both builds and I think he just wicked mine better.

I am also pleasantly surprised with the battery life of the RX200 after my lousy results of the Rolo DNA200 I had.
View attachment 49945

Awesome review @Rob Fisher.
You just make me want the supreme so much more!

What sort of usage are you getting out of the rolo?
Also what wattage are you running yours on?

I have been hearing a lot of people saying that the rolo has amazing battery life. Where it lasts them days.

I must be doing something wrong with mine or something. I don't get a full day vaping out of mine.
The part that most confuses me is that the rolo runs in series. So technically you should get amazing battery life. Which would explain why I don't get a full days Vape out of it. If it was parallel batteries, then Ja. Sure.

Maybe you could give me some pointers?

 

[Rob Fisher]

Awesome review @Rob Fisher.
You just make me want the supreme so much more!

What sort of usage are you getting out of the rolo?
Also what wattage are you running yours on?

I have been hearing a lot of people saying that the rolo has amazing battery life. Where it lasts them days.

I must be doing something wrong with mine or something. I don't get a full day vaping out of mine.
The part that most confuses me is that the rolo runs in series. So technically you should get amazing battery life. Which would explain why I don't get a full days Vape out of it. If it was parallel batteries, then Ja. Sure.

Maybe you could give me some pointers?

Barbie Killer it's early days with the RX for me... Dual Ni80 24g coils with a resistance of 0,31Ω and firing at 35 watts. I used it most of the morning and the battery indicator hardly moved... I'm using Turds in it and they were married once upon a time when I had my DNA but have subsequently been used in my single 18650 mods like the Snow Wolf... and I just took three of them and stuck them in the RX.

Ask me the same question in a couple of days once I have had some time to put it through it's paces.

 

[AlphaDog]

Great review and agree on all points!
View attachment 49813

Hi Rob. Out of interest, what build do you have in your supreme? What gives you the most flavour?

 

[WARMACHINE]

Took the Supreme out today with it's new mod. It certainly one of the more impressive tanks that I have played with... great juice capacity and pretty good flavour as well. I have had no gurgling and have the airflow and juice flow wide open.... but I know @BigGuy was getting some gurgling and he closed off the juice flow a bit... but he did both builds and I think he just wicked mine better.

I am also pleasantly surprised with the battery life of the RX200 after my lousy results of the Rolo DNA200 I had.
View attachment 49945

WOW, that tank is massive, it actually makes the RX200 look small

Mr Fisher, I am amazed you have never had an RX200. I love it. It is my man cave mod, exclusively for my drippers. Battery life is insane, and this mod can give a real 200 watts, if you really ever needed that.