Thanks to @Richio from Blckvapour for sending me this kit to review.
Package received like this;
Inside the box u get the following:
1 x 500ml pre mix
1 x 10ml nic booster 100mg
1 x 60ml chubby bottle
1 x measuring card
Next u start mixing
Step1:
Put your 60ml chubby bottle on a flat surface, and put the measuring card next to it, (i put a mod behind the card so it stands on its own because i had to take photos with my other hand, but you can hold the card in your one hand while adding the ingredients with your other hand)
Choose your favourite one shot concentrate, and find the % u need to mix it at. I chose Watermelon gummy candy, recommended to mix at 6-10%
I like my flavours strong so i mixed at 10%
Add the concentrate to the bottle until it reaches the 10% mark.
Step 2:
Decide the strength of nicotine u want, i decided to use 3mg.
Add the premixed VG and PG to your bottle until it reaches the bottom of the yellow line marked 3mg. (if you want 6mg,just add the vg pg mix until it reaches the bottom of the orange line marked 6mg.
Step 3:
Take your 100mg nic shot and add it to the bottle until it reaches the 100% line.
(it is hard to see on the photo, there was poor lighting in my room, and the bottle's curve made it a bit tricky to see when it reached 100%.) but look closely and nudge the bottle gently so the liquid moves inside, that way u will see if it is at the 100% mark.
Step 4:
Put cap on and shake the hell out of it.
Let it steep a few days. And your ready to vape
A suggestion to make it easier for left handed people, is to print on the other side of the card, so you can hold the card with your right hand to the right side of the bottle while adding ingredients with your left hand. Or just use a mod or something behind the card to hold it up, like i did.
Also, i would add an option to add a one shot of your choice to the kit.
This is a great kit for beginners wanting to start diy mixing.
Package received like this;
Inside the box u get the following:
1 x 500ml pre mix
1 x 10ml nic booster 100mg
1 x 60ml chubby bottle
1 x measuring card
Next u start mixing
Step1:
Put your 60ml chubby bottle on a flat surface, and put the measuring card next to it, (i put a mod behind the card so it stands on its own because i had to take photos with my other hand, but you can hold the card in your one hand while adding the ingredients with your other hand)
Choose your favourite one shot concentrate, and find the % u need to mix it at. I chose Watermelon gummy candy, recommended to mix at 6-10%
I like my flavours strong so i mixed at 10%
Add the concentrate to the bottle until it reaches the 10% mark.
Step 2:
Decide the strength of nicotine u want, i decided to use 3mg.
Add the premixed VG and PG to your bottle until it reaches the bottom of the yellow line marked 3mg. (if you want 6mg,just add the vg pg mix until it reaches the bottom of the orange line marked 6mg.
Step 3:
Take your 100mg nic shot and add it to the bottle until it reaches the 100% line.
(it is hard to see on the photo, there was poor lighting in my room, and the bottle's curve made it a bit tricky to see when it reached 100%.) but look closely and nudge the bottle gently so the liquid moves inside, that way u will see if it is at the 100% mark.
Step 4:
Put cap on and shake the hell out of it.
Let it steep a few days. And your ready to vape
A suggestion to make it easier for left handed people, is to print on the other side of the card, so you can hold the card with your right hand to the right side of the bottle while adding ingredients with your left hand. Or just use a mod or something behind the card to hold it up, like i did.
Also, i would add an option to add a one shot of your choice to the kit.
This is a great kit for beginners wanting to start diy mixing.
