COUNCIL OF VAPOR COLT VOLT 80W MOD

[Downtown Vapoury]

Council Of Vapor Colt Volt is an 80 watt temperature control device that seamlessly fits into the palm of your hand and is very comfortably. The ergonomically-designed internal battery mod has a charge capacity of 2150 mAh and can read resistance down to 0.1 ohms.


A short charge time, 0.96″ OLED screen, and carbon fiber design elements all come together with a ramp-up mode and safety protocols built into the device. You can send a burst of power to your build for complex coils that need a jolt to get started.


The three ramp-up power modes are SO (soft), ST (standard), and (PO) power for the ultimate kick. A spring-loaded 510 pin makes it easy find the sweet spot for your atomizer. The mod runs the full range from 1 watt to 80 watts, with output voltage from 0.5-8.5 volts. The Colt Volt supports temperature control for nickel, titanium and stainless steel wire.




Council of Vapor Colt Volt features :

• TC ready for Ni/Ti/SS
• 2150 mAh internal cell
• Rapid-charging mini-USB circuitry
• Council of Vapor emblazoned firing button
• 0.96″ OLED screen with bright display for sunny days
• Three setting ramp-up power mode for heavy duty performance
• Memory functions M1, M2, & M3 remember your build
• Output wattage: 1-80 watts
• Output voltage 0.5 – 8.5 volts
• Dimensions: 25.6 x 36.5 x 77.5 mm
• TC resistance reads down to 0.08 ohms; in power mode 0.1 ohms
• Spring-loaded 510 pin

Package contains :

• 1 x Mod
• 1 x User Manual
• 1 x Usb charging cable

Follow link to site - http://www.vapepulse.co.za/index.php?route=product/product&product_id=776