Having an idle moment I was playing with the Wire Wizard and plugged in a hybrid combination I thought should work well for TC - 316L Stainless #24g twisted with Ni200 #28g. Wire wizard came up with a nice graph and a TCR of .005055. It calculated the resistance of the coil, 8 wraps at 2.5mm at 0.084 ohms.
The wires got twisted, the coil got wound and installed. First surprise was the Cuboid reads 0.14 ohms. Checked all the screws were tight, all in order. Wicked the coil and filled the tank (Serpent). I locked the resistance and set the TCR to 0.0051 and tried to fire - nothing. Immediate Temp Protection. Finally after a lot of playing with the TCR value at a TCR of 0.100 its working and giving a reasonable vape.
What am I doing wrong?
The wires got twisted, the coil got wound and installed. First surprise was the Cuboid reads 0.14 ohms. Checked all the screws were tight, all in order. Wicked the coil and filled the tank (Serpent). I locked the resistance and set the TCR to 0.0051 and tried to fire - nothing. Immediate Temp Protection. Finally after a lot of playing with the TCR value at a TCR of 0.100 its working and giving a reasonable vape.
What am I doing wrong?