Siren 2 Reviews

Silver

Flavour and throat hit seeker
Staff member
Administrator
ECIGSSA Donor
VIP
LV
63
 
Joined
16/11/13
Posts
43,440
Awards
50
Location
Joburg
Digiflavor Siren 2 RTA

I decided to keep my 22mm 2ml version I got from Sir Vape and if I like it I will consider getting the 4.5ml version too.

I love my MTL vaping and still haven't found a good MTL RTA. My benchmark is my Reo/RM2 which is fabulous. The Kayfun V3 Mini came close but it gurgled a bit when the airflow was tight. That drove me nuts.

@Amir and @Rafique like it. So I decided to go for it.

So, I opened the box and rinsed it

Usual parts and bits and pieces.

5527a3e5eeb43b1f906e88927417c84c.jpg


Here is a close up of the deck. Allen key grubs.

ef9784c9b157c22e644a3f16d9ae65ac.jpg


Looks decent. I got the gunmetal grey colour. Drip tip seems comfy. This is a single coil atty. Unusual that the deck is higher in the tank. Maybe to be closer to the mouth for better flavour. We will find out.

26ae8fe75e4e0e728f56a1cdaf65917f.jpg


Damn, when I rinsed it I took out the base o ring. Now I can't find it. Must be somewhere. Will go look and then report back...
 
Last edited:
Found the o ring!

Was not easy to see on the roller towel. Hehe

a842082196327a1509fde6939249aded.jpg
 
Am going to use one of their supplied coils. Looks like 28g or 26g and about 3mm ID.

Will use CB2 wick.

Am just not sure what juice to try first. Either will be my Blackbird blend (but that's so precious and I can't afford leaking). Or maybe Havana Nightz which I also know well.

Will see
 
Correction. These are not Allen key grubs. They are slotted.

Needs a small screw driver. Those little three way things they supply are not easy to keep winding when installed on the device because they get in the way. Just use a normal screwdriver
 
Last edited:
Am going to use one of their supplied coils. Looks like 28g or 26g and about 3mm ID.

Will use CB2 wick.

Am just not sure what juice to try first. Either will be my Blackbird blend (but that's so precious and I can't afford leaking). Or maybe Havana Nightz which I also know well.

Will see
Definitely go with the Havana just to be safe @Silver !
 
Coil is in. Measures 1.04 ohms. So probably is 26g

Those grubs don't look too strong.

Another issue. When you cut off the excess coil legs, make sure those tiny pieces of wire are not protruding otherwise the chimney won't screw on properly. There are recesses on the side for you to 'fold' those bits into. At least that's what it looks like to me. I had to do that because I couldn't cut off the excess close enough.

Supplied coil fits perfectly though.

Looking good so far

6323799b4caad12887a6806f9097719b.jpg


Coil height - I went for top of coil slightly higher than the posts. I eyeballed if it would fit in the chimney and it looks ok. Checked on the ohm meter and appears to be fine.

Notice the scratch marks on the side of the post where I was trying to wrestle those tiny bits of wire into the recess.

de08e23892e1101b14718d374ead92a7.jpg
 
Have decided to use my Blackbird blend. Need to go mix up some. Will be back...
 
on second thoughts @Stosta you are right
I am going to go with Havana Nightz
just in case i have a dumping episode

Just need to mix up a stronger Havana quick
Mine is only 9mg
I need about 12mg at least
 
I am new to MTL and this post is really helpful thanks Silver. It almost looks like an RDTA with the deck sitting so high.
I wonder how Calamity Jane will perform in that setup.
 
on second thoughts @Stosta you are right
I am going to go with Havana Nightz
just in case i have a dumping episode

Just need to mix up a stronger Havana quick
Mine is only 9mg
I need about 12mg at least
Worth the extra work of mixing up a strong batch! It will get your day off to an awful start if you have to sit and lick your Blackbird blend off the table!
 
Havana Nightz has been blended into a little 10ml bottle. I added about 1ml 36mg PG Nic to my 9mg juice so I estimate it's now about 12mg

0b408361ad72d3f2e7514246fb0f6e26.jpg
 
Eagerly awaiting your thoughts @Silver! I've been eyeing one of these and want to know how it performs from the perspective of a long time MTL vaper!
 
Ok i just wuckly checked Phil Busardo's review video to see how he wicks it
He is a MTL expert and i like to see what he does. His things have hellped me a lot over the years.

One is always tempted to rush in and then spoil and otherwise exciting moment.

So it seems this is a bit like a RDTA and the key points are
- make the cotton reasonably thick to fill the channels
- let it go down till it just about touches the bottom
- be careful its not overly touching the deck part where the airholes are otherwise you get a "juice river" forming

Ok, lets get to work...

Will be using CB2
 
Making progress.

Wicking done.

Just about touching the deck. Cotton fairly tight. I did trim it a bit to thin it out because it looked way too thick when cotton was dry.

Looks okay. One side is a bit thinner than the other. But will have to do.

70adf6ab71e7263a192d9533ecdb7bbf.jpg


Wicks are quite long on this thing.

Check out the side profile:

348577b56b5deb856ea15b966716c500.jpg


I tried to push the wick a bit away from the deck where the airflow holes are.
 
Making progress.

Wicking done.

Just about touching the deck. Cotton fairly tight. I did trim it a bit to thin it out because it looked way too thick when cotton was dry.

Looks okay. One side is a bit thinner than the other. But will have to do.

70adf6ab71e7263a192d9533ecdb7bbf.jpg


Wicks are quite long on this thing.

Check out the side profile:

348577b56b5deb856ea15b966716c500.jpg


I tried to push the wick a bit away from the deck where the airflow holes are.


Wicks look just right, this tank wicks perfectly every time with me so far.

Looking Good @Silver
 
Moment of truth has arrived. All done. Ready to vape!

Minikin v1.5 doing the driving. Looks nice on the Minikin and is the right size.

Will report back after first vape ....

13255c5701a487d5cd7d639fc4c0f03a.jpg
 
First vape session done!

What's my initial impression?

Well, this seems to be a very good MTL tank!!

I have tried a few and this one is the best on first vape!!

03947ec0aa0e6847975cabb7d35cf1b1.jpg


The vaping action is so smooth and quiet. Amazing.

Am finding a happy place on the second smallest airhole using the bottom airflow control ring. Tightest and most satisfying draw I have had on a rebuildable tank.

Flavour is very good. Second and third toots after the coil has warmed up is quite rich and dense. Am vaping around 15 watts (on the 1 ohm coil)

Is it going to rival the RM2 for flavour? No I don't think so but to be fair this is my first setup and juice. And the supplied coil. Currently it is very good. Enough to warrant further tinkering.

My word this tank is refined and quiet. Can't believe it.

To sum up so far...
  • Good flavour
  • Superb vaping action
  • Tightest and most satisfying MTL draw I've had from a tank so far.
  • Good throat hit for me - and on 12mg juice - so thats a very good sign
  • Good MTL experience and well worth further fine tuning.

Thanks to @Amir and @Rafique for egging me on. You guys were spot on!
 
Last edited:
Glad you happy with it @Silver. The silence of the draw and smooth airflow just makes it that better not to mention no leaking
 
Back
Top