StompieZA Reviews

Item Name : DRAG 2 Platinum
Manufacturer: @VOOPOO
Website: https: www.voopoo.com
Cost: Still to be launched in SA

***DISCLAIMER*** This device was supplied to me by @VOOPOO for the purpose of reviewing the product for them and providing my personal feedback and opinion of this device before launching in South Africa. I also hope to create some excitement around this device. I’m not being paid for this review and this review is my own opinion and views.

So, let’s start off with some pictures of this device, from unboxing to being used

img_20190410_103451-jpg.163756


img_20190410_103505-jpg.163757

img_20190410_103543-jpg.163758

img_20190410_104347-jpg.163759


img_20190410_104353-jpg.163760


img_20190410_104357-jpg.163761


img_20190411_094928-jpg.163762


What’s inside the box you ask?

  • Drag 2 Platinum Mod
  • USB Cable
  • GENE Chip Card
  • User Manual
  • Warranty Card

Technical specifications are also important, so here they are:

Dimensions: 88.3x51x26.5mm
Weight: 158 grams
Battery: 2 x 18650 (Not included)
Max Power: 177 Watts


Device Specifications as found on website:

Material Used : Tungsten Alloy Body & Resin
Power Range : 5-177 Watt (20watt more than the old Drag2)
Voltage Output: 0-7.5V
Current Output: 0-40A
Resistance Range: 0.05 to 5.0 Ohm
TC Range: 100 to 315 C


So, what do I think about this device? Good question!

Looks

First thoughts upon unboxing this mod I immediately notice the size, I was expecting it to be as big its older brother, the first DRAG2. The Platinum has been made smaller and feels great in your hand. With the now rounded edges, it looks better in all departments. The high mirror finish is great but it’s a finger print magnet. This is a well built device with quality parts used and feels solid.

Vaping?

The fire rate on this device is instantaneous! As soon as you fire the you hear the coil going at full rate. Playing around with the new FIT feature, It allows the device to detect the tank/coil you are using and will have 3 different levels according to that coil which are FIT 1 – Battery (Saving), 2 – Flavor and 3 - Cloud. In this mode you cannot adjust the power as the device manages this and protects your sub ohm coils from being burnt due to high wattage. The FIT feature is recommended only for Subohm tanks and not RTA or RDA’s. This feature works great but I prefer straight power mode and to set my power. The device automatically sets the power level according to the resistance when a new tank or coil is fitted which is nice.

Fattening? Never!

The Platinum is now 45 grams lighter than the previous DRAG2 and now offers a 20-Watt power increase as well, not that I would ever need 177w.

Lifeline

Finally, I feel that this device manages the power delivery coupled with the battery exceptionally well, Like the Voopoo X217, the battery life seems to last much longer when compared at the same watts to my Fuchai 213 or Minikin V2. This would be thanks to the Gene.Fit chip I guess which manages the power better! A set of batteries comfortably lasts me a full day at around 65watt and I vape a lot!

Let’s get down to the nitty gritty! The want to hears and the not’s!

My Pro's
  • Comfortable to hold and not too big
  • Light weight (45grams lighter to be exact)
  • Looks great with the mirror platinum finish
  • Different Resin color options
  • Super-fast firing, pretty much instant 0.025 seconds
  • Powerful GENE.FIT Chip
  • No button rattle, they are solid!
  • The GENE chip manages battery life very good.
My Cons's
  • Battery door rattle/loose and doesn’t sit as snug as I would like it
  • Resin doesn’t seem to be removable to change colors.
  • Screen seems a little miss-aligned, part of the W in power mode is cut off or can only be seen if you look at an angle. (Might only be this one and not all)
  • Finger print magnet…which is to be expected with the mirror finish
  • Protruding 510 of around 0.5mm which causes a gap between the tank and the mod, a flush fit would look better IMO.
  • Asking if a new coil was installed, Randomly the mod will ask if I have a new coil? Without me removing batteries of the tank. Found this issue on my X217 as well
  • Its not quite Scratch-proof, I have picked up some small scratches over the couple of days while using it. This is a little disappointing…
  • Pictures below:
img_20190412_125856-jpg.163763
img_20190412_130003-jpg.163764


This device has Protection Functions to cover every type of failure and they include the following:

Over Temperature Protection
TC mode assures the mod and the battery work properly within a safe temperature range

Over Current Output Protection
Intelligently detects the output current and close the output current when the current exceeds the highest allowed limit.

Overcharge Protection
With dedicated lithium battery protection, the battery will be protected against battery overcharge and damage.

Over Discharge Protection
With dedicated lithium battery protection components, the battery will be protected against battery discharge and damage

Tank Short-circuit Protection
When a short-circuit is detected, the MOD will protect the battery by preventing the circuit returning.

Batter Reverse Protection
The mod will be protected against reverse battery and will not work.

Charging Protection
Supports balance charging with different battery brands

The following Colors are available:

F_02.jpg



My Verdict???

I have enjoyed using the DRAG 2 Platinum for the last couple of days even though to me it’s still a little big as I prefer smaller mods, but this is difficult in dual battery mods. I simply love the finish and the new rounded edges, it really does attract everyone’s attention especially the high mirror finish. I love the super-fast firing of this device because I hate having to wait for a coil to build up heat as I prefer vaping around 60watts. Using this device on the new VOOPOO MAAT tank as well as my RTAs it has impressed me and i have to say that it surpasses the previous DRAG2 in several categories! The build quality is great bar some of the cons I don’t like…but that me, perhaps you will look pass these things or they wont even bother you!

Would I buy one with my own hard-earned cash?

It’s a maybe from me, even though I love the new shape and design, the shiny new facelift and getting to tell everyone its platinum LOL, the size is still just a little on the big side for me personally. It’s a great device but I prefer smaller mods on the daily. The loose battery door moving while vaping is irritating the fact as well that it randomly asks you if you have installed a new coil? Weird. I also hate the fact that its not really scratch resistant...

Thank you for taking the time in reading my review and findings on the DRAG2 Platinum.
 
Thanks for the review @StompieZA
Nice photos again - and that Drag Platinum looks so great and colourful!
 
Morning guys,

I have just posted my first ever juice review on Vapour Mountains Juniper Gin and Pink Tonic juice which is absolutely awesome and out of this world.


Juniper teaser.jpg

Flavor?

Upon opening the bottle and taking a whiff of the juice, you get that familiar gin smell to the tee. I myself am a gin and tonic lover and this is spot on. On inhale you get a sweet taste with the slight bitter gin taste and is on the dot gin and pink tonic. On exhale you get more gin taste with the cooling effect which rounds the juice off nicely making you feel like you are drinking the real thing!

My Verdict?
I love it, its unique but has a great flavor and you will love this juice if you are a Gin lover or not.

Would I buy one or recommend this juice? Definitely will!

Link to the full review:
https://www.ecigssa.co.za/stompie-review-vm-juniper-gin-pink-tonic.t58472/
 
So up next i reviewed the Vladdin RE MTL pod device,

Full review here : Vladdin RE Review

My Verdict?

After using the device alongside my normal DL device, I have grown to like this small device. I think what I like most is the amount of vapour it produces and the restricted draw which I haven’t had from other pod style devices. When it comes to a MTL device, I prefer a device that make it feel like you are dragging a real stinkie in a way. This gives you good flavour, lots of clouds even with short or small draws.

Would I buy one or recommend one? Yes, I would. If you are a smoker and want to get of the stingkies then this little device will do the job just fine at a good price and good flavour.

Big thanks to @alissa at Vladdin for sending me this device for review!
 
So my latest review which i have done is for the Voopoo Alpha ZIP mod which is a 120Watt dual built in battery mod which uses the same GENE chip as the DRAG 2. This is basically a DRAG 2 in a new small body. This kit includes a MAAT subohm tank which offers great flavor and ease of use.

Full review can be found here

https://www.ecigssa.co.za/stompie-review-voopoo-zip-mini-120w-kit.t58577/

zip-mini.png


Thank you
 
Item Name : DRAG 2 Platinum
Manufacturer: @VOOPOO
Website: https: www.voopoo.com
Cost: Still to be launched in SA

***DISCLAIMER*** This device was supplied to me by @VOOPOO for the purpose of reviewing the product for them and providing my personal feedback and opinion of this device before launching in South Africa. I also hope to create some excitement around this device. I’m not being paid for this review and this review is my own opinion and views.

So, let’s start off with some pictures of this device, from unboxing to being used

img_20190410_103451-jpg.163756


img_20190410_103505-jpg.163757

img_20190410_103543-jpg.163758

img_20190410_104347-jpg.163759


img_20190410_104353-jpg.163760


img_20190410_104357-jpg.163761


img_20190411_094928-jpg.163762


What’s inside the box you ask?

  • Drag 2 Platinum Mod
  • USB Cable
  • GENE Chip Card
  • User Manual
  • Warranty Card

Technical specifications are also important, so here they are:

Dimensions: 88.3x51x26.5mm
Weight: 158 grams
Battery: 2 x 18650 (Not included)
Max Power: 177 Watts


Device Specifications as found on website:

Material Used : Tungsten Alloy Body & Resin
Power Range : 5-177 Watt (20watt more than the old Drag2)
Voltage Output: 0-7.5V
Current Output: 0-40A
Resistance Range: 0.05 to 5.0 Ohm
TC Range: 100 to 315 C


So, what do I think about this device? Good question!

Looks

First thoughts upon unboxing this mod I immediately notice the size, I was expecting it to be as big its older brother, the first DRAG2. The Platinum has been made smaller and feels great in your hand. With the now rounded edges, it looks better in all departments. The high mirror finish is great but it’s a finger print magnet. This is a well built device with quality parts used and feels solid.

Vaping?

The fire rate on this device is instantaneous! As soon as you fire the you hear the coil going at full rate. Playing around with the new FIT feature, It allows the device to detect the tank/coil you are using and will have 3 different levels according to that coil which are FIT 1 – Battery (Saving), 2 – Flavor and 3 - Cloud. In this mode you cannot adjust the power as the device manages this and protects your sub ohm coils from being burnt due to high wattage. The FIT feature is recommended only for Subohm tanks and not RTA or RDA’s. This feature works great but I prefer straight power mode and to set my power. The device automatically sets the power level according to the resistance when a new tank or coil is fitted which is nice.

Fattening? Never!

The Platinum is now 45 grams lighter than the previous DRAG2 and now offers a 20-Watt power increase as well, not that I would ever need 177w.

Lifeline

Finally, I feel that this device manages the power delivery coupled with the battery exceptionally well, Like the Voopoo X217, the battery life seems to last much longer when compared at the same watts to my Fuchai 213 or Minikin V2. This would be thanks to the Gene.Fit chip I guess which manages the power better! A set of batteries comfortably lasts me a full day at around 65watt and I vape a lot!

Let’s get down to the nitty gritty! The want to hears and the not’s!

My Pro's
  • Comfortable to hold and not too big
  • Light weight (45grams lighter to be exact)
  • Looks great with the mirror platinum finish
  • Different Resin color options
  • Super-fast firing, pretty much instant 0.025 seconds
  • Powerful GENE.FIT Chip
  • No button rattle, they are solid!
  • The GENE chip manages battery life very good.
My Cons's
  • Battery door rattle/loose and doesn’t sit as snug as I would like it
  • Resin doesn’t seem to be removable to change colors.
  • Screen seems a little miss-aligned, part of the W in power mode is cut off or can only be seen if you look at an angle. (Might only be this one and not all)
  • Finger print magnet…which is to be expected with the mirror finish
  • Protruding 510 of around 0.5mm which causes a gap between the tank and the mod, a flush fit would look better IMO.
  • Asking if a new coil was installed, Randomly the mod will ask if I have a new coil? Without me removing batteries of the tank. Found this issue on my X217 as well
  • Its not quite Scratch-proof, I have picked up some small scratches over the couple of days while using it. This is a little disappointing…
  • Pictures below:
img_20190412_125856-jpg.163763
img_20190412_130003-jpg.163764


This device has Protection Functions to cover every type of failure and they include the following:

Over Temperature Protection
TC mode assures the mod and the battery work properly within a safe temperature range

Over Current Output Protection
Intelligently detects the output current and close the output current when the current exceeds the highest allowed limit.

Overcharge Protection
With dedicated lithium battery protection, the battery will be protected against battery overcharge and damage.

Over Discharge Protection
With dedicated lithium battery protection components, the battery will be protected against battery discharge and damage

Tank Short-circuit Protection
When a short-circuit is detected, the MOD will protect the battery by preventing the circuit returning.

Batter Reverse Protection
The mod will be protected against reverse battery and will not work.

Charging Protection
Supports balance charging with different battery brands

The following Colors are available:

F_02.jpg



My Verdict???

I have enjoyed using the DRAG 2 Platinum for the last couple of days even though to me it’s still a little big as I prefer smaller mods, but this is difficult in dual battery mods. I simply love the finish and the new rounded edges, it really does attract everyone’s attention especially the high mirror finish. I love the super-fast firing of this device because I hate having to wait for a coil to build up heat as I prefer vaping around 60watts. Using this device on the new VOOPOO MAAT tank as well as my RTAs it has impressed me and i have to say that it surpasses the previous DRAG2 in several categories! The build quality is great bar some of the cons I don’t like…but that me, perhaps you will look pass these things or they wont even bother you!

Would I buy one with my own hard-earned cash?

It’s a maybe from me, even though I love the new shape and design, the shiny new facelift and getting to tell everyone its platinum LOL, the size is still just a little on the big side for me personally. It’s a great device but I prefer smaller mods on the daily. The loose battery door moving while vaping is irritating the fact as well that it randomly asks you if you have installed a new coil? Weird. I also hate the fact that its not really scratch resistant...

Thank you for taking the time in reading my review and findings on the DRAG2 Platinum.
Sorry bud very informative review as I was considering purchasing 1 of these be platinum drags however seeing my resin black drag lose its paint all over I was put off the drag and yes it’s all about functionality but nobody was to have a mod looking in bad shape as I have mods that are older than 2 years and used daily still in good condition … when I heard the platinum drag 2 was scratch resistant I was bound to get myself 1 now reconsidering my decision
 
Sorry bud very informative review as I was considering purchasing 1 of these be platinum drags however seeing my resin black drag lose its paint all over I was put off the drag and yes it’s all about functionality but nobody was to have a mod looking in bad shape as I have mods that are older than 2 years and used daily still in good condition … when I heard the platinum drag 2 was scratch resistant I was bound to get myself 1 now reconsidering my decision

True, Luckily it doesnt have paint that chips off although it does get fine scratches but this could be my own fault cause i place it in my cars cup holder with juice bottles when driving so yeah. Must say its only got a few small scratches and you would have to focus on them to see them. My point was just that they say its scratch and fade resistant so in my mind it should not even get fine scratches. But thats what my reviews are for, helping people make informative decisions. Its still a fantastic mod, been using it daily for a month now and cause i love it so much!
 
Up first in the range of XTAR chargers i review the MC2S Travel charger,

Here is the full review MC2S Travel Charger

Summary below:

My Pro's
  • Compatible with a wide range of batteries and sizes
  • Charges batteries really quick (2x18650 batteries takes around 1 hour at 2Amps)
  • Will automatically detect input current and adjust charging accordingly
  • 0V Activation Function will revive over discharged batteries
  • Simple LED status showing battery status (Red = Charging and Green = Fully Charged)
  • Micro USB makes it portable and allows you to charge anywhere! Compatible with all 5V USB chargers.
  • Easy to use with no modes, simply insert batteries and it will start charging.
  • Stops charging if a battery is fully charged, so no overcharging.
  • Very Portable and small

My Cons's
Cannot really find any? I could be picky and say maybe the USB cable could have been longer, but most people will probably just use the existing Cellphone USB charger cable.

My Verdict?
For such a small charger its powerful and gets the job done quickly and efficiently being intelligent without having any modes or functions to choose. Simply put this is plug and play and I love it! No need to carry around a big charger when going out.

Would I buy one or recommend one? Yes, this is a great travel charger which is small and does the job as required.
 
So tomorrow i will be posting about XTAR's latest product the VC4S which is a 4 Bay charger that can charge a single battery at 3Amp or 2 batteries at 2 Amp or 4 Batteries at 1Amp each! With a great bright informative LED screen, this is one heck of a charger!

DpMDSBt.jpg
 
So tomorrow i will be posting about XTAR's latest product the VC4S which is a 4 Bay charger that can charge a single battery at 3Amp or 2 batteries at 2 Amp or 4 Batteries at 1Amp each! With a great bright informative LED screen, this is one heck of a charger!

View attachment 165749
This charger looks really good but most importantly is functionality
 
Looking forward @StompieZA
And I’m keen to get a new charger at some point
 
Looking forward @StompieZA
And I’m keen to get a new charger at some point

Thanks Silver, Yeah this really is a great charger and seems like i will be benching my Nitecore I2 not just because this is a 4 Bay but rather the speed that this charger charges. Charged two flat 18650's last night in 1 hour! My nitecore took a good couple of hours to do the same but then again it only charges at 0.5A x 2
 
Last edited:
Thanks Silver, Yeah this really is a great charger and seems like i will be benching my Nitecore D2 not just because this is a 4 Bay but rather the speed that this charger charges. Charged two flat 18650's last night in 1 hour! My nitecore took a good couple of hours to do the same.

Just a heads up

My understanding on battery charging speed is as follows:
It’s considered to be better for a battery’s long term health to charge it slower
Very fast charging should only be used if absolutely necessary

I wish I knew at what point the battery’s health starts to suffer. Maybe someone knows from reading or watching Mooch
 
Ok so the my latest review of the VC4S 4 Bay charger is up Check the full review Here

This is a must have charger with so much information and modes, It truly is awesome!!

IMG_20190506_171204.jpg

IMG_20190506_171309.jpg

IMG_20190506_170946.jpg

My Pro's
  • Bright and informative wide LCD Screen
  • Compatible with a wide range of batteries and sizes
  • Charges really quick (2x18650 batteries takes around 1 hour at 2Amps)
  • Micro USB makes it portable and allows you to charge anywhere!
  • Test batteries true capacity with the Grading mode
  • Can revive overcharged and 0V batteries.
  • Intelligently Auto detect’ s battery type and size
  • QC3.0 Quick Charge and can charge a single battery at 3 amps (Dependant on input charger)
  • Easy to use with 1 display button and 1 mode button
  • Shows FULL on screen if a battery is charged with the battery mAh
  • Stops charging if a battery is fully charged, so no overcharging.
  • Bulky but Portable!
  • Flame retardant material is used in the whole construction
My Cons's
  • Does not include a QC3.0 USB Charger so you must use your smart phone charger or buy a QC3.0 charger to use the charger at its full potential.
  • Included USB cable could have been slightly longer but that’s just me.
  • The battery sliders seem a little flimsy and loose compared to my Nitecore D2 which has no side to side movement.
  • Manual does not explain each function and mode in to detail, could have been more detailed.

Make sure to go and read the full review!!

Thanks
 
Last edited:
Just a heads up

My understanding on battery charging speed is as follows:
It’s considered to be better for a battery’s long term health to charge it slower
Very fast charging should only be used if absolutely necessary

I wish I knew at what point the battery’s health starts to suffer. Maybe someone knows from reading or watching Mooch

Agreed fully, Luckily this charger intelligently auto selects the best current for your battery after evaluating the battery health and will select the best current to charge at. Perhaps this charger is charging faster for me as im used to charging 2 batteries at 0.5amps using the nitecore I2 (Correction, Previously stated D2)
 
Voopoo sent me the Drag Nano Pod to test and review and i have done so just click here for the full review

IMG_20190502_122037.jpg

IMG_20190502_171700.jpg

IMG_20190506_171641.jpg

My Pro's
  • Comfortable to hold and easy to use with no button or settings
  • Super Small & Light weight @ only 55grams
  • Looks great with the mirror finish
  • Different Resin colour options
  • Super-fast firing as soon as you inhale
  • Powerful GENE.POD Chip
  • Hits hard for a pod device, harder than the Zero, Aurora Play and Vladdin
  • Great battery life, used mine almost 2 and half days before the battery went from green to blue.
My Cons's

  • No power settings which some might not like.
  • The pods are a mission to fill and will spill cause its only got one hole so the air cannot escape causing liquid to push back.
  • Only one pod included, 2 would have been much better.
  • Pod flavour could have been better, its good and will rate it at a 6 out of 10
My Verdict???

It’s a cute little pod and I like it due to its size and looks. Flavour is good but I think it could have been a little better, but this is a pod and one can’t expect RTA flavour from any pod devises, so my feedback is an side by side comparison with other pods I have in my collection. For someone that needs that stealthy nic hit, this is perfect and offers great pod life and battery life.

Would I buy one with my own hard-earned cash? Its a maybe, it works great out and about and looks great...but i would probably just buy it for its cuteness.
 
Back
Top