Smoant Pasito

TheRandomVaper

Noob Vaper
LV
7
 
Joined
25/7/18
Posts
3
Awards
7
Age
36
Location
Johannesburg
Welcome back to another action packed review, this time I got a device that an ant for a chip.
I present to you the pasito by smoant, let’s go down and see how hard this ant really works.

STARTING OFF WITH THE PACKAGING

On the front you will get an image of the device and some branding, At the back of the box there are more branding, the contents, manufacturer’s details, your color configuration And your security code to ensure you did not buy a clone.

When you open the box they will tell you to have a good day And on the other side you have branded flappy doors with your instruction manual written on the inside. Before you can access your device you have some paperwork to go through, after that you get your pasito pod and some goodies in a box. and guess what there is more… when you lift up the flappy doors you will get more details on how to use the pasito.


THE CONTENTS

*Pasito pod
*0.6 Ohm mesh coil pre-installed
*1.4 Ohm ni80 round wire coil
*type-c usb cable
*manual to use the coils correctly
*A warranty card to complete on the day you purchase the device
*quality certificate


NOW THAT THE CONTENTS ARE COVERED WE CAN MOVE ON TO THE DEVICE

Starting from the top


You get a removable resin drip tip that is attached to the top cap that you unscrew to fill up your tank. And when you remove the top cap you will notice the 2 flat sides on the threading, this allows air to escape and eliminate leaking.
Still on top of the device you will have a circular filling port and on the side is your adjustable airflow that is innovatively built into the pod itself.

Moving down you get a body that is made from space aluminium and plastic stickers for decoration. On the front there will be a small window with 5 LED lights that is covered by the decorating sticker.

On the side you will get your fire button amd just below it your wattage adjustment button and finally a type-c USB port. At the bottom you will get some venting holes and some branding for the ant chip.

To access your coil, you simply pull the pod out of the device that is tightly secured by 4 strong magnets. On the device itself you will have 2 spring-loaded contact pins and on the pod you will have a removable gold plated base.

To access the coil just pull the base out of the pod and to install a new coil you simply hold the base and the old coil and turn anti-clockwise. Take your new coil and turn it into the base and give it a prime. Plug your coil and the base back into the pod and fill it up.


While the coil is saturating, lets go through the specs and then I will explain how to use the pasito in the correct manner. The Pasito looks simple but has a lot of features


It has a 1100 MAH battery
A power output of 10w to 25w
A voltage output of 3.2V until 4.2V
A resistance reading of 0.3 OHM up to 3 Ohm
1 amp charge rate
3 ml juice capacity
The and chip gives a constant power output even when the battery levels drop.
The chip also got multiple protections in place.

The device have 5 LED lights that serve multiple functions like:
Reading your battery level
Showing the power mode you are in
Charging level
And error messages

The coils itself will determine the setting you need to have your device on.

For the 0.6 mesh coil it is best between 20 and 25 watts
For the 1.4 round wire coil it is best between 10 and 13 watts


Lets see how to properly operate the pasito and the we can take it on a joyride.


To switch the device on and off you click the fire button 5 times and you will see all 5 lights flash.
To adjust the wattage press the smaller button and you will notice how the light will shine individually from low to high.


The power outputs is as follows:
10 13 16 20 and 25 watts

While you are vaping the deice will show the amount of battery life you have left where the battery percentage is as follows:
20 40 60 80 and 100 percent


Now let's discuss the pro's and con's

Staring with the pro’s...

You can adjust the power
Very good battery life
Uses usb type C
Can buy and RBA separately
Somewhat leak proof
Good flavor
Good vapour profuction
The coils are very good
Powerfull magnets


With the con’s...


The airflow button is loose and even if you close it you can still take a draw.
the RBA that is not included in the kit.
the sticker does not match the drip tip.


as you can see that the pros outweighs the cons and from what I can say is that this little device is something I would use on a daily basis. I have kept my and in my pants and the random vaper is out on a pasito cloud


65c53d47de72e89ec4f3a3e116d39b26.jpg


Sent from my MAR-LX1M using Tapatalk
 
Last edited:
Welcome back to another action packed review


This time I got a device that an ant for a chip


I present to you the pasito by smoant


Let’s go down and see how hard this ant really works

Starting off with the packaging


On the front you will get an image of the device and some branding


At the back of the box there are more branding


The contents

Manufacturer’s details

Your color configuration

And your security code to ensure you did not buy a clone.

When you open the box they will tell you to have a good day


And on the other side you have branded flappy doors with your instruction manual written on the inside.


Before you can access your device you have some paperwork to go through


After that you get your pasito pod and some goodies in a box


And guess what there is more… when you lift up the flappy doors you will get more details on how to use the pasito


With the packaging done we can now move on to the contents

Inside the box you will get your device with the 0.6 Ohm mesh coil pre-installed


You also get a spare 1.4 Ohm ni80 round wire coil

Then you get a type-c usb cable


A manual to use the coils correctly


A warranty card to complete on the day you purchase the device


And a quality certificate


Now that the contents are covered we can move on to the device

Starting from the top


You get a removable resin drip tip that is attached to the top cap that you unscrew to fill up your tank

And when you remove the top cap you will notice the 2 flat sides on the threading, this allows air to escape and eliminate leaking.

Still on top of the device you will have a circular filling port and on the side is your adjustable airflow that is innovatively built into the pod itself

Moving down you get a body that is made from space aluminium and plastic stickers for decoration

On the front there will be a small window with 5 LED lights that is covered by the decorating sticker

On the side you will get:

Your fire button

Your wattage adjustment button

And finally a type-c USB port


At the bottom you will get some venting holes and some branding for the ant chip.

To access your coil, you simply pull the pod out of the device that is tightly secured by 4 strong magnets

On the device itself you will have 2 spring-loaded contact pins

And on the pod you will have a removable gold plated base

To access the coil just pull the base out of the pod


To install a new coil you simply hold the base and the old coil and turn anti-clockwise


Take your new coil and turn it into the base

Give it a prime

Plug your coil and the base back into the pod and fill it up.


While the coil is saturating, lets go through the specs and then I will explain how to use the pasito in the correct manner.

The Pasito looks simple but has a lot of features


It has a 1100 MAH battery

A power output of 10w to 25w

A voltage output of 3.2V until 4.2V

A resistance reading of 0.3 OHM up to 3 Ohm

1 amp charge rate

3 ml juice capacity

The and chip gives a constant power output even when the battery levels drop

The chip also got multiple protections in place

The device have 5 LED lights that serve multiple functions like:


Reading your battery level

Showing the power mode you are in

Charging level

And error messages


The coils itself will determine the setting you need to have your device on.


For the 0.6 mesh coil it is best between 20 and 25 watts

For the 1.4 round wire coil it is best between 10 and 13 watts


Lets see how to properly operate the pasito and the we can take it on a joyride.


To switch the device on and off you click the fire button 5 times and you will see all 5 lights flash

To adjust the wattage press the smaller button and you will notice how the light will shine individually from low to high


The power outputs is as follows

10 13 16 20 and 25 watts


While you are vaping the deice will show the amount of battery life you have left where the battery percentage is as follows.


20 40 60 80 and 100 percent


Now lets have a vape and discuss the pros and the cons

Staring with the pro’s


You can adjust the power

Very good battery life

Uses usb type C

Can buy and RBA separately

Somewhat leak proof

Good flavor

Good vapour profuction

The coils are very good

Powerfull magnets




With the con’s


The airflow button is loose and even if you close it you can still take a draw

the RBA that is not included in the kit

the sticker does not match the drip tip


as you can see that the pros outweighs the cons and from what I can say is that this little device is something I would use on a daily basis.


I have kept my and in my pants and the random vaper is out on a pasito cloud


65c53d47de72e89ec4f3a3e116d39b26.jpg


Sent from my MAR-LX1M using Tapatalk

Sorry to say but this is a sloppy review. Presentation is non-existent and you need to work on your spelling and punctuation.
 
Last edited:
@TheRandomVaper welcome bru! Don't mind our resident critiques keep at it and it will get better....

If I can give some positive feedback maybe check other reviewers format, a picture says a thousand words as they say so try and add some pics to the explanations. I use Grammarly extention for my spellchecker for Chrome works a treat.

Otherwise keep em coming bru like your writing style....
 
Last edited:
thanks for the review @TheRandomVaper
Sounds like a great device

PS - I like your OhmBoyz Drip City Drip Tip - its cool!
 
Welcome back to another action packed review


This time I got a device that an ant for a chip


I present to you the pasito by smoant


Let’s go down and see how hard this ant really works

Starting off with the packaging


On the front you will get an image of the device and some branding


At the back of the box there are more branding


The contents

Manufacturer’s details

Your color configuration

And your security code to ensure you did not buy a clone.

When you open the box they will tell you to have a good day


And on the other side you have branded flappy doors with your instruction manual written on the inside.


Before you can access your device you have some paperwork to go through


After that you get your pasito pod and some goodies in a box


And guess what there is more… when you lift up the flappy doors you will get more details on how to use the pasito


With the packaging done we can now move on to the contents

Inside the box you will get your device with the 0.6 Ohm mesh coil pre-installed


You also get a spare 1.4 Ohm ni80 round wire coil

Then you get a type-c usb cable


A manual to use the coils correctly


A warranty card to complete on the day you purchase the device


And a quality certificate


Now that the contents are covered we can move on to the device

Starting from the top


You get a removable resin drip tip that is attached to the top cap that you unscrew to fill up your tank

And when you remove the top cap you will notice the 2 flat sides on the threading, this allows air to escape and eliminate leaking.

Still on top of the device you will have a circular filling port and on the side is your adjustable airflow that is innovatively built into the pod itself

Moving down you get a body that is made from space aluminium and plastic stickers for decoration

On the front there will be a small window with 5 LED lights that is covered by the decorating sticker

On the side you will get:

Your fire button

Your wattage adjustment button

And finally a type-c USB port


At the bottom you will get some venting holes and some branding for the ant chip.

To access your coil, you simply pull the pod out of the device that is tightly secured by 4 strong magnets

On the device itself you will have 2 spring-loaded contact pins

And on the pod you will have a removable gold plated base

To access the coil just pull the base out of the pod


To install a new coil you simply hold the base and the old coil and turn anti-clockwise


Take your new coil and turn it into the base

Give it a prime

Plug your coil and the base back into the pod and fill it up.


While the coil is saturating, lets go through the specs and then I will explain how to use the pasito in the correct manner.

The Pasito looks simple but has a lot of features


It has a 1100 MAH battery

A power output of 10w to 25w

A voltage output of 3.2V until 4.2V

A resistance reading of 0.3 OHM up to 3 Ohm

1 amp charge rate

3 ml juice capacity

The and chip gives a constant power output even when the battery levels drop

The chip also got multiple protections in place

The device have 5 LED lights that serve multiple functions like:


Reading your battery level

Showing the power mode you are in

Charging level

And error messages


The coils itself will determine the setting you need to have your device on.


For the 0.6 mesh coil it is best between 20 and 25 watts

For the 1.4 round wire coil it is best between 10 and 13 watts


Lets see how to properly operate the pasito and the we can take it on a joyride.


To switch the device on and off you click the fire button 5 times and you will see all 5 lights flash

To adjust the wattage press the smaller button and you will notice how the light will shine individually from low to high


The power outputs is as follows

10 13 16 20 and 25 watts


While you are vaping the deice will show the amount of battery life you have left where the battery percentage is as follows.


20 40 60 80 and 100 percent


Now lets have a vape and discuss the pros and the cons

Staring with the pro’s


You can adjust the power

Very good battery life

Uses usb type C

Can buy and RBA separately

Somewhat leak proof

Good flavor

Good vapour profuction

The coils are very good

Powerfull magnets




With the con’s


The airflow button is loose and even if you close it you can still take a draw

the RBA that is not included in the kit

the sticker does not match the drip tip


as you can see that the pros outweighs the cons and from what I can say is that this little device is something I would use on a daily basis.


I have kept my and in my pants and the random vaper is out on a pasito cloud


65c53d47de72e89ec4f3a3e116d39b26.jpg


Sent from my MAR-LX1M using Tapatalk
It’s an awesome little device indeed! The airflow adjustment button is not meant to close the airflow but for you to adjust between MTL and DL (more of a restricted DL). Keep up them coming sir!
 
Welcome back to another action packed review


This time I got a device that an ant for a chip


I present to you the pasito by smoant


Let’s go down and see how hard this ant really works

Starting off with the packaging


On the front you will get an image of the device and some branding


At the back of the box there are more branding


The contents

Manufacturer’s details

Your color configuration

And your security code to ensure you did not buy a clone.

When you open the box they will tell you to have a good day


And on the other side you have branded flappy doors with your instruction manual written on the inside.


Before you can access your device you have some paperwork to go through


After that you get your pasito pod and some goodies in a box


And guess what there is more… when you lift up the flappy doors you will get more details on how to use the pasito


With the packaging done we can now move on to the contents

Inside the box you will get your device with the 0.6 Ohm mesh coil pre-installed


You also get a spare 1.4 Ohm ni80 round wire coil

Then you get a type-c usb cable


A manual to use the coils correctly


A warranty card to complete on the day you purchase the device


And a quality certificate


Now that the contents are covered we can move on to the device

Starting from the top


You get a removable resin drip tip that is attached to the top cap that you unscrew to fill up your tank

And when you remove the top cap you will notice the 2 flat sides on the threading, this allows air to escape and eliminate leaking.

Still on top of the device you will have a circular filling port and on the side is your adjustable airflow that is innovatively built into the pod itself

Moving down you get a body that is made from space aluminium and plastic stickers for decoration

On the front there will be a small window with 5 LED lights that is covered by the decorating sticker

On the side you will get:

Your fire button

Your wattage adjustment button

And finally a type-c USB port


At the bottom you will get some venting holes and some branding for the ant chip.

To access your coil, you simply pull the pod out of the device that is tightly secured by 4 strong magnets

On the device itself you will have 2 spring-loaded contact pins

And on the pod you will have a removable gold plated base

To access the coil just pull the base out of the pod


To install a new coil you simply hold the base and the old coil and turn anti-clockwise


Take your new coil and turn it into the base

Give it a prime

Plug your coil and the base back into the pod and fill it up.


While the coil is saturating, lets go through the specs and then I will explain how to use the pasito in the correct manner.

The Pasito looks simple but has a lot of features


It has a 1100 MAH battery

A power output of 10w to 25w

A voltage output of 3.2V until 4.2V

A resistance reading of 0.3 OHM up to 3 Ohm

1 amp charge rate

3 ml juice capacity

The and chip gives a constant power output even when the battery levels drop

The chip also got multiple protections in place

The device have 5 LED lights that serve multiple functions like:


Reading your battery level

Showing the power mode you are in

Charging level

And error messages


The coils itself will determine the setting you need to have your device on.


For the 0.6 mesh coil it is best between 20 and 25 watts

For the 1.4 round wire coil it is best between 10 and 13 watts


Lets see how to properly operate the pasito and the we can take it on a joyride.


To switch the device on and off you click the fire button 5 times and you will see all 5 lights flash

To adjust the wattage press the smaller button and you will notice how the light will shine individually from low to high


The power outputs is as follows

10 13 16 20 and 25 watts


While you are vaping the deice will show the amount of battery life you have left where the battery percentage is as follows.


20 40 60 80 and 100 percent


Now lets have a vape and discuss the pros and the cons

Staring with the pro’s


You can adjust the power

Very good battery life

Uses usb type C

Can buy and RBA separately

Somewhat leak proof

Good flavor

Good vapour profuction

The coils are very good

Powerfull magnets




With the con’s


The airflow button is loose and even if you close it you can still take a draw

the RBA that is not included in the kit

the sticker does not match the drip tip


as you can see that the pros outweighs the cons and from what I can say is that this little device is something I would use on a daily basis.


I have kept my and in my pants and the random vaper is out on a pasito cloud


65c53d47de72e89ec4f3a3e116d39b26.jpg


Sent from my MAR-LX1M using Tapatalk
A very nice review for a first one @TheRandomVaper , congratulations. You will grow as you travel this road on your review journey, and I liked your choice of pod for the review, been looking at it, maybe I should take another look at it, sounds as if it is a great little device.

Good luck going forward and looking forward to see what you come up with for your next one. Enjoy your ride on the Pasito Cloud, just remember to fill the tank ever so often, running out of juice at cloud height is not a good idea.:D

Ps, I see you published from Tapatalk, maybe try a desktop or similar as I know not all of the functions like formatting, spacing and some others work so well from there.

Many happy clouds to you.
RF
 
Back
Top