Dicodes stealth mode

Chickenstrip

All these flavours and you choose to be salty
LV
17
 
Joined
16/9/19
Posts
600
Awards
20
Location
Cape Town
I have a dicodes No.6 and can't tell if the device has a busted screen or if its just in stealth mode. Anyone know how to get it out of stealth mode?

Cheers, can't make sense of the manual.
 
Press button 3 times?? Sorry, don't have the mod, but that is all I could decipher for you.
 
With the iStick Pico it is apparently just holding - button and power button at the same time.
 
I have a dicodes No.6 and can't tell if the device has a busted screen or if its just in stealth mode. Anyone know how to get it out of stealth mode?

Cheers, can't make sense of the manual.
Try 5 clicks off. If you see the “goodbye...” then the screen is working.
5 clicks back on and it should be out of stealth mode.
 
Try 5 clicks off. If you see the “goodbye...” then the screen is working.
5 clicks back on and it should be out of stealth mode.
No matter which combination of buttons or amount of times I press the buttons. The screen stays dark. The mod does however fire and lock.
 
It was just an attempt at a refurb. I've got other mods. But to ditch a €200 euro mod without giving it my all is just criminal.


Thanks mate but I can't find what I need online. I need someone with experience.
Check what other screens might fit. Screens are all the same. It's the ribbon that makes it different.

I read they explained how the mod works hence me posting it. Sorry if it didn't work.
 
Check what other screens might fit. Screens are all the same. It's the ribbon that makes it different.

I read they explained how the mod works hence me posting it. Sorry if it didn't work.

I don't believe they did. Not even the manual explains it clearly. I think it's down to a pinched ribbon wire or a failed screen :(
 
Screenshot_20200726-212828~2.png
There's a Facebook group if you do Facebook. Other than that. Sorry I read wrong.
 
Have you tried reseating the ribbon cable?
Almost certain its not in stealth mode if you dont get the hello/goodbye messages.
I had a look through the manual and it says nothing about stealth mode, even though the cremedevape site mentions stealth mode.
They also sell a BF60 spare screen for 8 GBP
https://www.cremedevape.com/epages/...tPath=/Shops/yxve46fvrnud/Products/DICODES-53

I'd first push button combinations before opening it up again.
If no luck, then remove the ribbon cable from the board and wipe with alcohol on an ear bud.
 
Have you tried reseating the ribbon cable?
Almost certain its not in stealth mode if you dont get the hello/goodbye messages.
I had a look through the manual and it says nothing about stealth mode, even though the cremedevape site mentions stealth mode.
They also sell a BF60 spare screen for 8 GBP
https://www.cremedevape.com/epages/...tPath=/Shops/yxve46fvrnud/Products/DICODES-53

I'd first push button combinations before opening it up again.
If no luck, then remove the ribbon cable from the board and wipe with alcohol on an ear bud.

I have tried reseating both ribbons inside the mod. I haven't yet tried cleaning with alcohol. Sadly that screen is not the same as the one in the mod. Its a big square screen. But I've contacted dicodes for advice. I'll do the alcohol clean tomorrow and report back.

Are these ribbons proprietary or can replacements be found locally?
 
I have tried reseating both ribbons inside the mod. I haven't yet tried cleaning with alcohol. Sadly that screen is not the same as the one in the mod. Its a big square screen. But I've contacted dicodes for advice. I'll do the alcohol clean tomorrow and report back.

Are these ribbons proprietary or can replacements be found locally?
Nope, made in a subsidiary of dicodes, so basically inhouse.
You could probably check the ribbon for conductivity end to end with a meter.
MODS & ELECTRONICS – MADE IN GERMANY
Company dicodes, located in the former coal-mine area "Ruhrgebiet" in the mid-western part of Germany, is a leading developer and manufacturer of high-end-mods, like dicodes 2380, Dani Extreme, Telegonos and Tiny.

The complete electronic development (hard- and software) and design for all of our mods is created in-house. This makes very small sizes of the electronic possible, resulting in extremely short devices with very high efficiency at the same time. Our mission is to offer you truly high quality mods, which you will enjoy every single moment!

MADE IN GERMANY – The difference makes the difference.
 
Back
Top