Wow, that is amazing. And It looks like the tail of a Xenomorph.
Dem builds
- Thread starter wiesbang
- Start date
Wow, that is amazing. And It looks like the tail of a Xenomorph.
If i may know where did you get the wasp rda from?
- Joined
- 16/6/16
- Posts
- 3,513
- Awards
- 36
- Age
- 54
Love how how clean it is
Thanks to @KZOR 's "Bdeez" I made a tripple core (26g) Ni80 claptoned with 36g Ni80.
I'm using the Ammit 25 as I'm doing a bit of travelling this weekend and don't want to struggle with a leaking tank (Kylin) so the Ammit has to step in.
Glowing nice and even
Primed and ready for the juice
All filled up and ready to go.
I have to use the RX200s again as my RX300 died eventually. For those who don't know, the RX300 was in my hand when the truck hit me and it was picked up about 20m away and the Kylin was still on it and half full of juice (glass not broken) and it was still working fine. I used it at the hospital as well.....hehehe. Unfortunately, the RX300 eventually started giving problems (you would too if you were hit by a truck) and died a few days ago. It was a nice ceremony and I gave a very touching eulogy. I will be buying a new one. Awesome mods those.
I'm using the Ammit 25 as I'm doing a bit of travelling this weekend and don't want to struggle with a leaking tank (Kylin) so the Ammit has to step in.
Glowing nice and even
Primed and ready for the juice
All filled up and ready to go.
I have to use the RX200s again as my RX300 died eventually. For those who don't know, the RX300 was in my hand when the truck hit me and it was picked up about 20m away and the Kylin was still on it and half full of juice (glass not broken) and it was still working fine. I used it at the hospital as well.....hehehe. Unfortunately, the RX300 eventually started giving problems (you would too if you were hit by a truck) and died a few days ago. It was a nice ceremony and I gave a very touching eulogy. I will be buying a new one. Awesome mods those.
Last edited:
I am extremely pleased with the result. Very nice flavor with a nice warm vape. I am pleasantly surprised with the Ammit 25. Definitely a step up from the Big Baby Beast (RBA).
This is my first attempt at a parallel build. I'm glad it got the resistance down to a manageable level. And luckily it is not too difficult to do. Especially on the Ammit 25. That thing is a dream to build on.
Looking good @KZOR ! I'd love to be able to build something like those but with my CSS affliction some fused Clapton's are about as advanced as I can go.
3 x 28ga with 38ga ni80 alien, 5 wraps on a 2.5mm ID rod for my ESG Skyline. 
Pretty much no ramp up to speak of, even at 25 watts @Silver, flavor and vapor is very dense and warm. Pleasantly surprised considering most people use a higher resistance build in the Skyline
So much want....
built a 3 x core staggered fused claptons on the aeronaut rda
2*26ga SS / 34ga N80 , diam 3mm , dual 6 wrap , 0,12ohms . icon rda
Trying out my new VGod Elite tube mech, I found that it just wasn't hitting as hard as I wanted it to with my Reload V1.5 RDA. So I slapped together some tri core aliens, 3 x 28ga with 38ga ni80, 5 wraps on a 3.5mm rod which, according to the wire wizard on steam engine should read at 0.344 ohm per coil, dual coil should be exactly 0.17 ohm which will give me 24.71 amps on a fresh Sony VTC5A. I've seen guys build way lower, but I'm new to tube mechs, I've built in mechs before (Reo P67) but there I would aim for 0.25-0.3 ohm, so I'll keep to below 25 amps to be safe. I had just enough wire left to make a 5 wrap, 2.5mm ID coil for my Skyline ( should read about 0.25 ohm). Will report back when I have time to install it in the Reload.
PS I love the camera on this Huawei P9 Plus
PS I love the camera on this Huawei P9 Plus
Hi there @rishard
What are your thoughts on the Icon RDA?
Which is preferred, the Icon or the Druga?
Sent from my iPhone using Tapatalk
Similar threads
