Dem builds
- Thread starter wiesbang
- Start date
Okay re edited the pic and reposted. Maybe showing now?Nope. Only became clickable when I quoted your post.
I think it might have been his browser or something. But thanks for letting me know
Nope, not my browser. Now your pic is showing. It did not before and Cor saw the pic after you edited it again.
I would not call those ugly.If you do a web search (YouTube) type in any build and you will find in-depth descriptions and instructions on them.
Not one for very fancy builds I've been playing around a bit seeking an easy yet better build than my usual plain single SS wire. Came up with this:
2 x 28AWG SS 316L loosely fused with 32AWG Kanthal 6/5 winds comming in at 0.34 ohm. Reasonable clouds but really good on taste. Freshly made and could still improve as the coil settles in.
Regards
2 x 28AWG SS 316L loosely fused with 32AWG Kanthal 6/5 winds comming in at 0.34 ohm. Reasonable clouds but really good on taste. Freshly made and could still improve as the coil settles in.Regards
so today i did my first diy wire lol i made something hehehe dont eaven know what to call it tho but i used flatwire N80 24GA as a base then wraped it with 28GA SS all this was done by hand as i dont have a drill and i did bleed alot so i can say these coils took it all to make,The coils consist of 4and a half wraps @ 2.5mm they ohm out @ 0.14
Attachments
OK. That is cool. Considering it was done by hand, that is awesome.so today i did my first diy wire lol i made something hehehe dont eaven know what to call it tho but i used flatwire N80 24GA as a base then wraped it with 28GA SS all this was done by hand as i dont have a drill and i did bleed alot so i can say these coils took it all to make,The coils consist of 4and a half wraps @ 2.5mm they ohm out @ 0.14
Obviously if it had been done with a drill it would have been tighter, but I also don't own a drill and I am now tempted to have a bash.
Well done dude. Very inspirational.
Good Evening good people please can someone assist me with my build the coils is working fine but I am struggling with the cotton the first 3 pulls is fine then it gives me that burning dry pull I already changed the cotton like 3 times so please people I'm in need of help....
How tight is the cotton in the coil?
Sent from my E6653 using Tapatalk
Sent from my E6653 using Tapatalk
- Joined
- 16/6/16
- Posts
- 3,513
- Awards
- 36
- Age
- 54
@Nico Cronje ........ what setup are you running and could you possibly post a pic of it?
I assume you using cotton bacon v2?
I assume you using cotton bacon v2?
as tight as it can be its 7 wrap on 2.5, so there is minimal space so the cotton is tight I am using cotton bacon.
- Joined
- 16/6/16
- Posts
- 3,513
- Awards
- 36
- Age
- 54
If that is the case and you are vaping above 40W then you either ........
1) burning through your wick (tug on a side and see if it seperates)
2) not giving your cotton enough time to saturate
i am using a wismec rx mini with the goblin v3 mini tank, my coils is 7 wrap 2.5mm and no only cotton bacon
- Joined
- 16/6/16
- Posts
- 3,513
- Awards
- 36
- Age
- 54
@Cor ,you did great and have a ton of patience to wrap by hand.Get yourself a cheap drill and you'll be in Clapton hog heaven.Do a search on line to find the "Bead a lon "wire tammer method (Ohmboy Josh has a great video on this) it is ingenious and so easy that I can wrap two feet of perfect dual Claptons' in a few minutes hands free.I bought a pack of 3 Bead a lon wire tammers'on Amazon for about 3 bucks.Happy vapeing!so today i did my first diy wire lol i made something hehehe dont eaven know what to call it tho but i used flatwire N80 24GA as a base then wraped it with 28GA SS all this was done by hand as i dont have a drill and i did bleed alot so i can say these coils took it all to make,The coils consist of 4and a half wraps @ 2.5mm they ohm out @ 0.14
Thank you for the info and tips ile defnitly go and have a look.Any help I can get I will use to its fullest.I did have a great feelining when I completed those two coils.
Similar threads
