IPV4 120w 100j Update File Posted
- Thread starter SamuraiTheVapor
- Start date
So who is going to update first ??
In case you didn't know how to update;
REMOVE THE BATTERIES FROM YOU IPV4 FIRST
1.) Download and install the update software from here
Download the update file and save it somewhere you won't lose it
Link
2.) Reboot PC
3.) Open the YiHi SXI program and click on "Connection" then press connect. The program should say "Device Connected." If not then run the "Install Driver" option and choose IPV 4
4.) Click "Return" at the top. Then at the main menu click on "Upgrade" then "Open File" and select the upgrade file you downloaded
5.) Click on upgrade, wait to finish.
REMOVE THE BATTERIES FROM YOU IPV4 FIRST
1.) Download and install the update software from here
Download the update file and save it somewhere you won't lose it
Link
2.) Reboot PC
3.) Open the YiHi SXI program and click on "Connection" then press connect. The program should say "Device Connected." If not then run the "Install Driver" option and choose IPV 4
4.) Click "Return" at the top. Then at the main menu click on "Upgrade" then "Open File" and select the upgrade file you downloaded
5.) Click on upgrade, wait to finish.
Last edited:
This is a test file that users can use now. P4You said they will release the final version within a few days.
I just ran the update.
Still 50J in ni200 (Nickel)
120J in ti01 (Titanium).
120W in power/kanthal mode.
So I can confirm that it is working on my side
Still 50J in ni200 (Nickel)
120J in ti01 (Titanium).
120W in power/kanthal mode.
So I can confirm that it is working on my side
FANTASTIC! I will be giving this a go later on tonight.. Also was wondering if the update fails Im sure you can revert to the stock 100w file??
But I wont have an issue, cannot wait to be up to 120w and 120j titanium coils. OH YEA!
But I wont have an issue, cannot wait to be up to 120w and 120j titanium coils. OH YEA!
this link isnt working.
http://www.pioneer4you.com/article.php?id=30
That's the one i'm downloading.(I take no responsibility for this file or its effects)
That's the one i'm downloading.(I take no responsibility for this file or its effects)
So we are using the ipv3li sofware update package as the software to update this?
Yes, it's not only for the ipv3li - it's for all IPV devices if I'm not mistaken.
Awesome. Im downloading now. will burning programs to flash drive and take home to do on PC at home. My internet at home has been down for a week. Thanks Samurai uv been a major help.
Thanks so much @SamuraiTheVapor for all your help.
This is amazing with this upgrade I can vape kanthal in temp mode and it really works amazing
I nominate you as today's M.V.V.(most valuable vaper)
I second that!!!
Guys, thank you for all the value you add to the forum. For me as a newbie I would always appreciate this.
Just one question. Why would you want to update firmware on a device made for heating a coil ? I'm not being judgy, just very curious. And 120W .... you guys have lungs of steel. On a note I cannot comment on these devices since I have not tried them, but I happily vape on my twisp and Eleaf 20W ( at 6 - 8 W )
Just one question. Why would you want to update firmware on a device made for heating a coil ? I'm not being judgy, just very curious. And 120W .... you guys have lungs of steel. On a note I cannot comment on these devices since I have not tried them, but I happily vape on my twisp and Eleaf 20W ( at 6 - 8 W )
Ok my ipv 4 is nou upgraded. Now to get some Ti wire !
Similar threads
