Dem builds

[wiesbang]

Not sure if there is another thread like this
Show us those builds

Just made this one 6 loops
3 per side 5wraps each
28g kanthal 3mm dia
1.18 ohm
Wicked zigzag with jap organic cotton

 

[CloudmanJHB]

Awesome and neat build !

 

[Sebastian]

Duel coil build
24g Kanthal
10 raps each
.45ohm

 

[RIEFY]

R

ss build in crius


Sent from my iPhone using Tapatalk

 

[wiesbang]

28g kanthal quad coil

 

[n0ugh7_zw]

​

 

[Cave Johnson]

Fantastic stuff right there @n0ugh7_zw !

 

[blujeenz]

I think young @n0ugh7_zw works for Nedbank with their "ask once" policy... got thrown dead with builds here.

 

[CloudmanJHB]

Incredible builds there @n0ugh7_zw

 

[blujeenz]

a mini #32 clapton in a Goblin mini, no space for a tadpole once the chimney's on.

 

[n0ugh7_zw]

Crius V3 build
Wire: Kanthal A1 (China Authentic) | Gauge: 24 | Wraps: 5 Per Coil | ID: 3MM | Resistance: 0.24 OHMS | Power: 40W-60W

​

 

[Gizmo]

Gee, @n0ugh7_zw , your coils are nothing short of bad ass! Well done.

 

[n0ugh7_zw]

Gee, @n0ugh7_zw , your coils are nothing short of bad ass! Well done.

thanks @Gizmo I pretty much stole it from @RIEFY

 

[Juno]

Some coil porn for all you builders out there...

 

[OreO]

Tried my hand at this for the first time.
Definitely not the neatest but i learnt a lot for the next time i attempt this build.

Sent from my SM-N9005 using Tapatalk

 

[Juno]

Sexy @OreO

 

[n0ugh7_zw]

Phenotype L Mini
Wire: Kanthal A1 (Vapowire) | Gauge: 24 | Wraps: 6 Per Coil | ID: 3.5MM | Resistance: 0.32 OHMS | Power: 60W-85W


Sapor
Wire: SS316L (UD) | Gauge: 24 | Wraps: 6 Per Coil (Spaced) | ID: 3.5MM | Resistance: 0.16 OHMS | Preheat: 200W | Temp: 245C | Power: 75W

​

 

[Neal]

Phenotype L Mini
Wire: Kanthal A1 (Vapowire) | Gauge: 24 | Wraps: 6 Per Coil | ID: 3.5MM | Resistance: 0.32 OHMS | Power: 60W-85W


Sapor
Wire: SS316L (UD) | Gauge: 24 | Wraps: 6 Per Coil (Spaced) | ID: 3.5MM | Resistance: 0.16 OHMS | Preheat: 200W | Temp: 245C | Power: 75W

​

Mate,
You are a coil building rock star. Awesome. My only complaint is you have now made me realise how kaak my feeble efforts are. Back to the drawing board as they say...

 

[n0ugh7_zw]

Mate,
You are a coil building rock star. Awesome. My only complaint is you have now made me realise how kaak my feeble efforts are. Back to the drawing board as they say...

Thanks for the kind words.

Look at some of my older posts in this forum
I've been the maker of many a dodgy coil

It's like anything new, initially you make crap, until one day you don't
The main thing is to keep at it, the more you do, the better you'll do!

 

[ZeeZi169]

Current build in the Billow V2

Sent from my SM-A500F using Tapatalk

 

[wiesbang]

24g ss and 26g kanthal 3.5mm dia 0.14ohm

 

[OreO]

24g ss and 26g kanthal 3.5mm dia 0.14ohm

Thats good going.

Let us know gow it vapes.does the ss bring the resistance down a lot?

Sent from my SM-N9005 using Tapatalk

 

[wiesbang]

Thats good going.

Let us know gow it vapes.does the ss bring the resistance down a lot?

Sent from my SM-N9005 using Tapatalk

Yeah. That size coil on kanthal normally has a resistance of between 0.4-0.8ish iirc

 

[OreO]

@wiesbang

I thought so. Thanks for sharing looks good to

Sent from my SM-N9005 using Tapatalk

 

[OreO]

http://

22g 4mmID 7 wrap @0.28 ohms
On my new double vision rda.
Also wivked with fibre freaks (my first time using it).
Was tough but managed to wick it eventually. Somewhat used the scottish roll technique.

Sent from my SM-N9005 using Tapatalk