Help with 510 pin

clydern

Elite Vaper
LV
21
 
Joined
3/4/18
Posts
1,221
Awards
23
Age
32
Location
Cape town
Hey guys so I got my first hybrid 510 tube mod today and I am a bit reluctant to use one of my own RDA with the mech due to not knowing what is enough protrusion on the RDA . I want to use my medusa V1 with the tube mod so badly . I would like advice please guys. ( This is not my first mech mod. Just my first hybrid 510 mod )

Thanks in advance
1a8e43000f1235eaebbd5b6338ac165a.jpg


Sent from my LG-H990 using Tapatalk
 
Good that you asking questions here @clydern
Im sure the hybrid mech modders will be able to advise you soon when they see this

@Maxxis, just tagging you to take a look at @clydern 's post above and advise if you have a moment
 
Good that you asking questions here @clydern
Im sure the hybrid mech modders will be able to advise you soon when they see this

@Maxxis, just tagging you to take a look at @clydern 's post above and advise if you have a moment
Thanks man. I really do appreciate it

Sent from my LG-H990 using Tapatalk
 
Thanks man. I really do appreciate it

Sent from my LG-H990 using Tapatalk

Pleasure
Lets see what the experts have to say
Dont connect it up yet in case something goes wrong!
 
Perfectly safe on the hybrid mechs.

Just be 100% sure your batteries aren’t dented in any way and keep your eyes on the voltages.

If you have any questions you can PM me or email to johan@lungcandy.co.za


Sent from my iPhone using Tapatalk
 
Oh @clydern
While you at it - can you also post a pic of your hybrid mech mod and tell us what it is - just in case that might help for the others to advise you better
 
Perfectly safe on the hybrid mechs.

Just be 100% sure your batteries aren’t dented in any way and keep your eyes on the voltages.

If you have any questions you can PM me or email to johan@lungcandy.co.za


Sent from my iPhone using Tapatalk
Thanks man. I appreciate. Now I can have some piece of mind. Thanks guys

Sent from my LG-H990 using Tapatalk
 
Oh @clydern
While you at it - can you also post a pic of your hybrid mech mod and tell us what it is - just in case that might help for the others to advise you better
I bought it from a forum member today
0f1089ed8f3d6e2cec96c82a49e12668.jpg
e5a51b16d3648e81c4c5d67d12fd1078.jpg
a5cfaa09b8fc04e37a50b2b982dae671.jpg
f12fee81d62a2eb0040b800b441b4110.jpg
dfdb7982fb12626f5d9e3cb20fb652af.jpg


Sent from my LG-H990 using Tapatalk
 
Looks lovely @clydern
Please share with us how the first vape on it goes with that RDA
And what juice?
 
Looks lovely @clydern
Please share with us how the first vape on it goes with that RDA
And what juice?
After quite a few minutes of double / triple checking everything. I took my first hit . I honestly can see why hybrid 510 mechs has such dedicated followers . I am hooked ( 0.20 ohm build. Vaping on tempestus )
7d73f89ec5a68761793198d4a92aa5c4.jpg


Sent from my LG-H990 using Tapatalk
 
After quite a few minutes of double / triple checking everything. I took my first hit . I honestly can see why hybrid 510 mechs has such dedicated followers . I am hooked ( 0.20 ohm build. Vaping on tempestus )
7d73f89ec5a68761793198d4a92aa5c4.jpg


Sent from my LG-H990 using Tapatalk

Thats awesome @clydern
Tell us more
Why do you say that?
 
Idk if it's just me but I notice the slight decrement in battery sag. I am assuming it's due to the hybrid 510.

Sent from my LG-H990 using Tapatalk

What i meant was why do you say you understand why hybrid mechs have such a following?

All mechs will have some sort of battery sag after a while as the battery runs down. Also depends on the quality of the battery and the resistance used
 
What i meant was why do you say you understand why hybrid mechs have such a following?

All mechs will have some sort of battery sag after a while as the battery runs down. Also depends on the quality of the battery and the resistance used
Oh sorry . Due to it hitting harder than normal 510 mech ( IMO ) . But I am still a newbie. So I might just be feeling this way just because I got a new mod

Sent from my LG-H990 using Tapatalk
 
Oh sorry . Due to it hitting harder than normal 510 mech ( IMO ) . But I am still a newbie. So I might just be feeling this way just because I got a new mod

Sent from my LG-H990 using Tapatalk

Maybe its because there are less components so the voltage drop is less
I think someon does test the voltage drops on these mechs to find the ones with the lowest voltage drop and therefore they "hit the hardest" - all else equal
 
Maybe its because there are less components so the voltage drop is less
I think someon does test the voltage drops on these mechs to find the ones with the lowest voltage drop and therefore they "hit the hardest" - all else equal
Ahhhh. Thanks for the information. I am always willing to learn. Do you perhaps have any tips on removing the oxidation on the brass of my mod?

Sent from my LG-H990 using Tapatalk
 
Ahhhh. Thanks for the information. I am always willing to learn. Do you perhaps have any tips on removing the oxidation on the brass of my mod?

Sent from my LG-H990 using Tapatalk

No unfortunately not
But i am sure the brass experts can advise
@Rob Fisher , who was the person that polished one of your mechs?
 
To remove oxidation/patina On my copper mods, I use warm water and vinegar mixture (80/20), and just let it sit for a couple of minutes, then brush with an old toothbrush, and rinse properly.
You could also coat the area with "all gold 36" leave for 5mins and rinse




Sent from my iPhone using Tapatalk
 
To remove oxidation/patina On my copper mods, I use warm water and vinegar mixture (80/20), and just let it sit for a couple of minutes, then brush with an old toothbrush, and rinse properly.
You could also coat the area with "all gold 36" leave for 5mins and rinse




Sent from my iPhone using Tapatalk
Thank you man.

Sent from my LG-H990 using Tapatalk
 
I was worried about the exact same things a few months ago when I first started using mechs @clydern .

As @Maxxis said, that is enough of a protrusion, and just check your batteries everytime for dent's in the top cap.

One other thing, with almost every RDA these days having a replaceable squonk pin you need to check beforehand that it won't move when you fire the mod. Just push it down on a surface to make sure it stays "protruded".
 
I was worried about the exact same things a few months ago when I first started using mechs @clydern .

As @Maxxis said, that is enough of a protrusion, and just check your batteries everytime for dent's in the top cap.

One other thing, with almost every RDA these days having a replaceable squonk pin you need to check beforehand that it won't move when you fire the mod. Just push it down on a surface to make sure it stays "protruded".
Thank you man. Luckily the RDA I have doesn't squonk so I never unscrewed the pin. But I checked that the 510 pin was in securely due to the fact that the pin attaches to the deck. I am enjoy the mod at the moment. I am considering getting a 0.17 ohm build. I have song vtc 4 . So it should hit a bit harder than the build I have in now

Sent from my LG-H990 using Tapatalk
 
Back
Top