Help with 510 pin

[clydern]

Hey guys so I got my first hybrid 510 tube mod today and I am a bit reluctant to use one of my own RDA with the mech due to not knowing what is enough protrusion on the RDA . I want to use my medusa V1 with the tube mod so badly . I would like advice please guys. ( This is not my first mech mod. Just my first hybrid 510 mod )

Thanks in advance

Sent from my LG-H990 using Tapatalk

 

[Silver]

Good that you asking questions here @clydern
Im sure the hybrid mech modders will be able to advise you soon when they see this

@Maxxis, just tagging you to take a look at @clydern 's post above and advise if you have a moment

 

[clydern]

Good that you asking questions here @clydern
Im sure the hybrid mech modders will be able to advise you soon when they see this

@Maxxis, just tagging you to take a look at @clydern 's post above and advise if you have a moment

Thanks man. I really do appreciate it

Sent from my LG-H990 using Tapatalk

 

[Silver]

Thanks man. I really do appreciate it

Sent from my LG-H990 using Tapatalk

Pleasure
Lets see what the experts have to say
Dont connect it up yet in case something goes wrong!

 

[Maxxis]

Perfectly safe on the hybrid mechs.

Just be 100% sure your batteries aren’t dented in any way and keep your eyes on the voltages.

If you have any questions you can PM me or email to johan@lungcandy.co.za


Sent from my iPhone using Tapatalk

 

[Silver]

Oh @clydern
While you at it - can you also post a pic of your hybrid mech mod and tell us what it is - just in case that might help for the others to advise you better

 

[clydern]

Perfectly safe on the hybrid mechs.

Just be 100% sure your batteries aren’t dented in any way and keep your eyes on the voltages.

If you have any questions you can PM me or email to johan@lungcandy.co.za


Sent from my iPhone using Tapatalk

Thanks man. I appreciate. Now I can have some piece of mind. Thanks guys

Sent from my LG-H990 using Tapatalk

 

[clydern]

Oh @clydern
While you at it - can you also post a pic of your hybrid mech mod and tell us what it is - just in case that might help for the others to advise you better

I bought it from a forum member today

Sent from my LG-H990 using Tapatalk

 

[Silver]

Looks lovely @clydern
Please share with us how the first vape on it goes with that RDA
And what juice?

 

[clydern]

Looks lovely @clydern
Please share with us how the first vape on it goes with that RDA
And what juice?

After quite a few minutes of double / triple checking everything. I took my first hit . I honestly can see why hybrid 510 mechs has such dedicated followers . I am hooked ( 0.20 ohm build. Vaping on tempestus )

Sent from my LG-H990 using Tapatalk

 

[Silver]

After quite a few minutes of double / triple checking everything. I took my first hit . I honestly can see why hybrid 510 mechs has such dedicated followers . I am hooked ( 0.20 ohm build. Vaping on tempestus )

Sent from my LG-H990 using Tapatalk

Thats awesome @clydern
Tell us more
Why do you say that?

 

[clydern]

Thats awesome @clydern
Tell us more
Why do you say that?

Idk if it's just me but I notice the slight decrement in battery sag. I am assuming it's due to the hybrid 510.

Sent from my LG-H990 using Tapatalk

 

[Silver]

Idk if it's just me but I notice the slight decrement in battery sag. I am assuming it's due to the hybrid 510.

Sent from my LG-H990 using Tapatalk

What i meant was why do you say you understand why hybrid mechs have such a following?

All mechs will have some sort of battery sag after a while as the battery runs down. Also depends on the quality of the battery and the resistance used

 

[clydern]

What i meant was why do you say you understand why hybrid mechs have such a following?

All mechs will have some sort of battery sag after a while as the battery runs down. Also depends on the quality of the battery and the resistance used

Oh sorry . Due to it hitting harder than normal 510 mech ( IMO ) . But I am still a newbie. So I might just be feeling this way just because I got a new mod

Sent from my LG-H990 using Tapatalk

 

[Silver]

Oh sorry . Due to it hitting harder than normal 510 mech ( IMO ) . But I am still a newbie. So I might just be feeling this way just because I got a new mod

Sent from my LG-H990 using Tapatalk

Maybe its because there are less components so the voltage drop is less
I think someon does test the voltage drops on these mechs to find the ones with the lowest voltage drop and therefore they "hit the hardest" - all else equal

 

[clydern]

Maybe its because there are less components so the voltage drop is less
I think someon does test the voltage drops on these mechs to find the ones with the lowest voltage drop and therefore they "hit the hardest" - all else equal

Ahhhh. Thanks for the information. I am always willing to learn. Do you perhaps have any tips on removing the oxidation on the brass of my mod?

Sent from my LG-H990 using Tapatalk

 

[Silver]

Ahhhh. Thanks for the information. I am always willing to learn. Do you perhaps have any tips on removing the oxidation on the brass of my mod?

Sent from my LG-H990 using Tapatalk

No unfortunately not
But i am sure the brass experts can advise
@Rob Fisher , who was the person that polished one of your mechs?

 

[Rob Fisher]

No unfortunately not
But i am sure the brass experts can advise
@Rob Fisher , who was the person that polished one of your mechs?

It was done by @smilelykumeenit

 

[GerritVisagie]

To remove oxidation/patina On my copper mods, I use warm water and vinegar mixture (80/20), and just let it sit for a couple of minutes, then brush with an old toothbrush, and rinse properly.
You could also coat the area with "all gold 36" leave for 5mins and rinse




Sent from my iPhone using Tapatalk

 

[Christos]

Polishing @Rob Fisher's brass, coating in tomatoes sauce etc... this thread is going in a @Stosta direction very quickly

 

[clydern]

To remove oxidation/patina On my copper mods, I use warm water and vinegar mixture (80/20), and just let it sit for a couple of minutes, then brush with an old toothbrush, and rinse properly.
You could also coat the area with "all gold 36" leave for 5mins and rinse




Sent from my iPhone using Tapatalk

Thank you man.

Sent from my LG-H990 using Tapatalk

 

[Stosta]

I was worried about the exact same things a few months ago when I first started using mechs @clydern .

As @Maxxis said, that is enough of a protrusion, and just check your batteries everytime for dent's in the top cap.

One other thing, with almost every RDA these days having a replaceable squonk pin you need to check beforehand that it won't move when you fire the mod. Just push it down on a surface to make sure it stays "protruded".

 

[clydern]

I was worried about the exact same things a few months ago when I first started using mechs @clydern .

As @Maxxis said, that is enough of a protrusion, and just check your batteries everytime for dent's in the top cap.

One other thing, with almost every RDA these days having a replaceable squonk pin you need to check beforehand that it won't move when you fire the mod. Just push it down on a surface to make sure it stays "protruded".

Thank you man. Luckily the RDA I have doesn't squonk so I never unscrewed the pin. But I checked that the 510 pin was in securely due to the fact that the pin attaches to the deck. I am enjoy the mod at the moment. I am considering getting a 0.17 ohm build. I have song vtc 4 . So it should hit a bit harder than the build I have in now

Sent from my LG-H990 using Tapatalk