The Flow by Odis

[Rob Fisher]

Ti FLows finally clean... Ultrasonic needed. 3mm The Coil Company Coil installed!


Royal Wicks done and trimmed!


XXX filled up and we are ready to rock!


OK I'm ready to head the the Casino for a small flutter!

 

[Christos]

XXX loaded and ready to go!

 

[Rob Fisher]

Nugget, Flo and XXX... doesn't get much better than that @Christos! Chicken dinner baby!

 

[Christos]

Nugget, Flo and XXX... doesn't get much better than that @Christos! Chicken dinner baby!

There is a small gap for improvement.... Nugget flow and XXX while getting a lapdance from a young blonde perhaps

 

[Moomba]

Trying to find an Odis Flow Ti for me is becoming quite hard XD I think I have better luck winning the lotto and becoming president.

Can anyone point me in the right direction? I feel like I'm looking in the wrong spot.

 

[TheV]

Trying to find an Odis Flow Ti for me is becoming quite hard XD I think I have better luck winning the lotto and becoming president.

Can anyone point me in the right direction? I feel like I'm looking in the wrong spot.

As far as I know you'll have to import it at this point. Not sure what the best options are but a google revealed these options:
https://www.wicksandwires.com/products/flow-ti-atty-odis-collection
http://www.vapetime.co.uk/flow-ti-atty-by-odis/

I'm sure the people here can provide you with the correct information though

 

[Christos]

Trying to find an Odis Flow Ti for me is becoming quite hard XD I think I have better luck winning the lotto and becoming president.

Can anyone point me in the right direction? I feel like I'm looking in the wrong spot.

You might find a flow attached to the sale of a billet box.
Other than that I believe they are sold out worldwide so you will have to be patient.

 

[Moomba]

Thank you @TheV and @Christos. Ill patiently wait for them to come in stock again.

Update: I think i may have found one. thank you all again

 

[Rob Fisher]

Hopefully Friday there will be 9 happy BB owners because at this stage it looks like the last 10 Odis Ti Flows on the planet will be arriving in Durban!

 

[BioHAZarD]

Hopefully Friday there will be 9 happy BB owners because at this stage it looks like the last 10 Odis Ti Flows on the planet will be arriving in Durban!
View attachment 110779

The only thing that would make us happier is the inclusion of a BB in the parcel

 

[Rob Fisher]

The only thing that would make us happier is the inclusion of a BB in the parcel

That can be arranged at a price!

 

[BioHAZarD]

That can be arranged at a price!

yup... will be in touch

 

[Christos]

I have a spotless RPG for you @BioHAZarD

 

[BioHAZarD]

I have a spotless RPG for you @BioHAZarD

you are killing me dude

 

[Silver]

Ooh, that kurbis looks smart @Moey_Ismail !
Lovely

Hoping one of the Flow users can help you out on the fine tuning

Where is it leaking from?

 

[UzziTherion]

Congrats my brother, looks stunning!!! Thanks to you I also have a flow now

Was having the same problem with mine, @Christos helped me out, you need to get the right amount of cotton, that was key for me


Sent from my iPhone using Tapatalk

 

[Moey_Ismail]

Congrats my brother, looks stunning!!! Thanks to you I also have a flow now

Was having the same problem with mine, @Christos helped me out, you need to get the right amount of cotton, that was key for me


Sent from my iPhone using Tapatalk

I rewicked now, didn't comb the cotton like I normally do, and flicked it around to cover the wick holes, so far so good. Will let you know how it holds up bro

 

[Moey_Ismail]

Ooh, that kurbis looks smart @Moey_Ismail !
Lovely

Hoping one of the Flow users can help you out on the fine tuning

Where is it leaking from?

Straight out the airflow @Silver

 

[Silver]

Straight out the airflow @Silver

I had that 2 days ago after rewicking the exocet and then filling.
I despise leaking setups!!!

Then after i cleaned it , it behaved for that full tankful. Strange. Maybe it was something with the Boro. I dont know.

Rewicked again anyway after that tank because i could not trust it
Made my wicks a bit thicker in the coil and cut the tails a bit shorter

But i doubt that will help you because this was the exocet.
Is there no "tutorial" on wicking the flow on here?

 

[RenaldoRheeder]

Finally got my BB Kurbis-SS and my replacement positive for the Odis Flow Ti, 2x28ga fused with 36ga ni80, 3mm ID, 7 wraps, coming in at 0.63ohm at 28w, still struggling a bit with the wicking, leaks a little every time I fill, any tips?

Check the gasket of the Boro tank. I had one that was problematic and caused some leaking. Basically the top part of the gasket somehow got squashed when I closed it. That caused some leaking

The gasket must be flat (if that makes sense)

Sent by iDad's iPhone

 

[Jengz]

I had that 2 days ago after rewicking the exocet and then filling.
I despise leaking setups!!!

Then after i cleaned it , it behaved for that full tankful. Strange. Maybe it was something with the Boro. I dont know.

Rewicked again anyway after that tank because i could not trust it
Made my wicks a bit thicker in the coil and cut the tails a bit shorter

But i doubt that will help you because this was the exocet.
Is there no "tutorial" on wicking the flow on here?

I’ve noticed (but it’s on my sxk Exocet) sometimes when I screw it into my 510 tab the bottom airflow thing on the exo needs to be tightened a bit or else it leaks, don’t know if it does that on the authentic

 

[Silver]

I’ve noticed (but it’s on my sxk Exocet) sometimes when I screw it into my 510 tab the bottom airflow thing on the exo needs to be tightened a bit or else it leaks, don’t know if it does that on the authentic

Im not sure @Jengz
I didnt know there was an airflow thing at the bottom - lol

 

[Moey_Ismail]

Check the gasket of the Boro tank. I had one that was problematic and caused some leaking. Basically the top part of the gasket somehow got squashed when I closed it. That caused some leaking

The gasket must be flat (if that makes sense)

Sent by iDad's iPhone

It's definitely not that as it came from under the boro tank right through the airflow of the Flow, but it seems to be ok now after the rewick

 

[Christos]

It's definitely not that as it came from under the boro tank right through the airflow of the Flow, but it seems to be ok now after the rewick

Coils high and centered and wick tight like old mother Hubbard cupboard. no thinning of wicks required.

 

[SAVapeGear]

Also slide glass close slowly.Sometimes it creates a pressure and force juice through the wick causing it to leak.Better not to overfill with the flow.