Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Thanks I'm just made a coil with what sounds like too much over hang wil trim it and take a pictureAs @kimbo said, you want to use a very small amount of wick and make sure that the juice channels are clearly visible when the chimney is screwed on - push the cotton against the sides (towards the coil) on both sides.
I have cut down on the cotton I use in there quite a bit, to the point where there is just enough to hang down and touch the deck (no bunching up at all).
Also, the SubTank RBA does not handle high VG juice at all well...you need to modify it for use with higher than 60VG juices (it really works best with 50/50 juice).
should it look somethinglike this
You seem to know the kanger subtank mini do you have any tips and tricks on how to screw the parts together and apart I broke one which was over tightenedAs @kimbo said, you want to use a very small amount of wick and make sure that the juice channels are clearly visible when the chimney is screwed on - push the cotton against the sides (towards the coil) on both sides.
I have cut down on the cotton I use in there quite a bit, to the point where there is just enough to hang down and touch the deck (no bunching up at all).
Also, the SubTank RBA does not handle high VG juice at all well...you need to modify it for use with higher than 60VG juices (it really works best with 50/50 juice).
I have also found that spaced coils works much better in the subtank vs compressed coilsshould it look somethinglike this
I would have to get a backup before doing something like that and sorry for asking what do mean by (id) noob questionmy channels are slightly modified
what id is your coil? if you have a very small id with very little wick you going to get dry hits while taking loooong hits. I have recommended this build and id to many and it works even with standard channels. i would take a file or knife and open the chanels slightly to make sure it wicks efficiently. it literally takes 5min and you good to go
You seem to know the kanger subtank mini do you have any tips and tricks on how to screw the parts together and apart I broke one which was over tightened
I
I would have to get a backup before doing something like that and sorry for asking what do mean by (id) noob question
Sorry I mean taking the rba apartI'm guessing you mean unscrewing the chimney from the base on the RBA. For this it is very simple...never over-tighten it...just tighten until it stops. When trying to get it off the best is to grab the chimney as low as you can mange - i.e. as close to the where the threading is - and turn very gently, the more pressure you apply the less likely you are to get it loose. Of course you should first clean it off with a cloth. Oh, and hold the base by the part the 510 screws into - when it is being very difficult I actually remove the pin first.
ID = inner diameter of the coil......I
I would have to get a backup before doing something like that and sorry for asking what do mean by (id) noob question
O I use two mil and 50 50 like it that wayIf you are using 50/50 juice there is no reason to mod the RBA - mine is still unmodified and runs flawlessly
ID is the inner dimension of the coil - i.e. the thickness of whatever you wrap around
O its two mil
O I use two mil and 50 50 like it that way
Is there benefits in using the rope like wicks
Saw some at vapeking using the cotton that came with the kanger any thing to help with taste you get wen you just built coil
Will do thanks for all the help appreciat it solved the problem thanks
The tank is awsome sorry for bothering again how long before you rebuild and rewick your tank I play on the safe side and do it every weak afraid of it dying on meYou are very welcome, glad to hear it's working well now - I really love this tank
The tank is awsome sorry for bothering again how long before you rebuild and rewick your tank I play on the safe side and do it every weak afraid of it dying on me