ESG Skyline RTA

[Singlecoilguy]

I think it seems to fine but it's so late here in Toronto will follow up with you later..

What diameter coil do you recommend?

Do you think it was a production error that the cotton is not visible from the slots?

Sent from my Nexus 6 using Tapatalk

 

[Singlecoilguy]

I got a few bubbles but not the beautiful ones in the videos.. lol

Sent from my Nexus 6 using Tapatalk

 

[Rob Fisher]

I think it seems to fine but it's so late here in Toronto will follow up with you later..

What diameter coil do you recommend?

Do you think it was a production error that the cotton is not visible from the slots?

Sent from my Nexus 6 using Tapatalk

I use 2,5mm Fused Claptons in my Skylines.

No I don't think it's a production error... it was designed that way... if you can get your hands on some Cotton Bacon or Royal Wicks or Fibre Freaks Cotton Blend you will find that you don't get a cotton taste and they wick really well in RTA's.

 

[Singlecoilguy]

I will try that... Thanks again for your help... I wanna see those bubbles... Ha ha

Sent from my Nexus 6 using Tapatalk

 

[SAVapeGear]

Try changing that TPD plastic glass for the normal Glass one.

 

[Christos]

I'm a bit late to the party @Singlecoilguy but I had a similar issue with the TPD glass. Once I got the proper boroscite glass it solved my issue.
I can also only see 1 of the channels from the jfc windows.
Also if you haven't already done so look at page 16 of this thread for my tutorial on how I wick the skyline.

Let us know how it goes!
Also what is the temperature on your side as the cold could be influencing the viscosity of your juice.

 

[Amir]

I'm a bit late to the party @Singlecoilguy but I had a similar issue with the TPD glass. Once I got the proper boroscite glass it solved my issue.
I can also only see 1 of the channels from the jfc windows.
Also if you haven't already done so look at page 16 of this thread for my tutorial on how I wick the skyline.

Let us know how it goes!
Also what is the temperature on your side as the cold could be influencing the viscosity of your juice.

Can't be the temperature because Canada is warmer than SA at the moment. I really suspect that TotallyPointlessD!@kmove glass.

 

[Rob Fisher]

Skylines in full service today. One with XXX and the other with Panama!

 

[Ash]

Which do u reach for first? Since it seems you have 2 outstanding juices in there

 

[Rob Fisher]

Which do u reach for first? Since it seems you have 2 outstanding juices in there

Set a new record for vaping another juice yesterday (Panama) and this morning... never vaped another juice for so long... switched to XXX this afternoon. Actually really happy I have two ADV's now!

 

[Amir]

Set a new record for vaping another juice yesterday (Panama) and this morning... never vaped another juice for so long... switched to XXX this afternoon. Actually really happy I have two ADV's now!

Me too man... that XXX needed a break. You've got @Oupa working overtime.


Sent from my iPhone using Tapatalk

 

[Silver]

Set a new record for vaping another juice yesterday (Panama) and this morning... never vaped another juice for so long... switched to XXX this afternoon. Actually really happy I have two ADV's now!

Oh my word, this is very BIG news @Rob Fisher
Congrats on finding another juice!!! Lets see if it holds up for you... Am hoping...

Panama sounds like its a winner

 

[Singlecoilguy]

Just checking in... Thanks for all your help and tips... The bubbles are still trapped but I didn't switch to the glass tank yet. However no more dry hits!

Just two minor issues.

1. I find that the flavor is so intense that I'm getting a moist inhale (but NOT actual juice via driptip like cheap attys) ... Micro-droplets if that's even a term. I have tried to turn the jfc down but still same issue

2. Also for some strange reason there are random drops of juice where the tanks meets the deck... But doesn't show up as a consistent leak.



Sent from my Nexus 6 using Tapatalk

 

[Rob Fisher]

@Singlecoilguy the moist intense flavour is just what you want... and I guess that's why the Skyline is as popular as it is.

Random drops of juice doesn't sound right... but there will be some condensation from air airflow holes depending on the mod you put it on...

 

[Singlecoilguy]

It's clearly not condensation... Basically at the the seam of deck and tank

Sent from my Nexus 6 using Tapatalk

 

[Moey_Ismail]

Just checking in... Thanks for all your help and tips... The bubbles are still trapped but I didn't switch to the glass tank yet. However no more dry hits!

Just two minor issues.

1. I find that the flavor is so intense that I'm getting a moist inhale (but NOT actual juice via driptip like cheap attys) ... Micro-droplets if that's even a term. I have tried to turn the jfc down but still same issue

2. Also for some strange reason there are random drops of juice where the tanks meets the deck... But doesn't show up as a consistent leak.



Sent from my Nexus 6 using Tapatalk

If you're using the tpd tank just check that it's the right way around, you'll.notice the tank has steps inside, out the thinner part of the tank at the bottom so that there's more clearance between tank and chamber

 

[Singlecoilguy]

Ok I will check that.

You guys are superb

Sent from my Nexus 6 using Tapatalk

 

[Singlecoilguy]

Changed it to ultem tank.. BUBBLES!!!! Just have to keep an eye on seepage

Sent from my Nexus 6 using Tapatalk

 

[RayDeny]

Two long haul international flights later and not a single drip from my Skyline. Full tank and closed juice control. I am properly impressed with this tank. Not only is it a wonderful flavor tank but for a frequent flyer like me, this is now my go to traveler.

 

[Singlecoilguy]

I don't know if it's visible but there is a random drop of juice. It has happened now like 5 times or so...

Sent from my Nexus 6 using Tapatalk

 

[Rob Fisher]

I don't know if it's visible but there is a random drop of juice. It has happened now like 5 times or so...

Sent from my Nexus 6 using Tapatalk

Yip that is not right... it should not leak one bit... mine doesn't. Don't know what to suggest?

 

[Amir]

I don't know if it's visible but there is a random drop of juice. It has happened now like 5 times or so...

Sent from my Nexus 6 using Tapatalk

first time im seeing or hearing of this too... how much are you filling the tank before popping on the juice flow control seal? I suspect that with the very tight tolerances, the pressure caused by over-filling may be pushing out a bead of juice through the seal between the airflow control ring and the lower metal portion of the tank that the air flow ring rotates on. Try removing the airflow ring and see if there is any excess juice/water/moisture beneath it from lubing the o-rings or internal tank pressure

 

[Singlecoilguy]

I only fill 3/4 full. O-rings are lubed as well. Drops showed up on both 2.5 and 3 mm builds. No gurgling or anything like that. Will try to remove AFC and see what's going on.

Sent from my Nexus 6 using Tapatalk

 

[Amir]

I only fill 3/4 full. O-rings are lubed as well. Drops showed up on both 2.5 and 3 mm builds. No gurgling or anything like that. Will try to remove AFC and see what's going on.

Sent from my Nexus 6 using Tapatalk

It could be excess juice from the lubed o-rings.

 

[Singlecoilguy]

I'm sorry to keep on bothering you guys... I took m my skyline 3/4 full to work.. turned jfc off.. left it inside bag standing up .. it was not in the car.. and I got juice coming out of the airflow holes... ??? When it vapes, it's probably the best atty I had... But to be told to change o-rings to an atty that is only a week old doesn't make me happy

Sent from my Nexus 6 using Tapatalk